Based on its listed ingredients, Ice-burst Cooling SPF 50 Matte Gel Sunscreen for Oily skin | In-Vivo Tested can feed fungal acne; contains fragrance/allergens — details in the flags below.
Below is every ingredient in Ice-burst Cooling SPF 50 Matte Gel Sunscreen for Oily skin | In-Vivo Tested explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF.
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Centella Asiatica Extract is a plant-derived ingredient rich in triterpenoids (asiaticoside, madecassoside, asiatic and madecassic acids) used to calm inflammation, support wound healing, and strengthen the skin barrier. It is also valued for antioxidant and collagen-supporting properties in topical formulations.
Polysilicone-15 (also known as Parsol SLX) is a silicone-based organic UV filter that absorbs UVB radiation, commonly used in sunscreens and daytime cosmetic products to provide photoprotection and improve formulation feel. It is a film-forming polymer that helps stabilize and enhance the efficacy of other UV filters.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
Contact irritation | Rare | Mild redness or stinging occasionally reported, generally well tolerated. |
Allergic contact dermatitis | Very rare | Isolated sensitization cases documented; uncommon compared to older UV filters. |
Photoallergic reaction | Very rare | Rarely reported given the molecule's high photostability and low systemic absorption. |
Skin irritation or mild contact dermatitis | Rare | Occasional reports of localized redness or irritation, generally mild. |
Allergic contact dermatitis / sensitization | Very rare | Isolated case reports; considered a low-sensitizing UV filter. |
Skin irritation | Rare | Generally well tolerated; mild irritation possible in sensitive individuals. |
Comedogenicity / breakouts | Uncommon | Low comedogenic potential but may contribute to clogged pores in acne-prone skin. |
Contact urticaria | Very rare | Isolated reports of hive-like reactions tied to benzoate moiety. |
Contact dermatitis / allergic sensitization | Rare | Occasional reports of allergic contact dermatitis in patch-test studies. |
Comedogenicity | Uncommon | Considered low-to-moderate pore-clogging potential; may aggravate acne-prone skin in some individuals. |
Mild skin irritation or transient redness | Rare | Generally well tolerated; reactions are infrequent and usually mild. |
Comedogenicity (pore clogging) | Rare | Low-to-moderate comedogenic potential; may be relevant for acne-prone individuals. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Ethylhexyl Triazone Key active UVB sunscreen filter | Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF. |
| Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active UVA filter (sunscreen) | Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens. |
| C12-15 Alkyl Benzoate Emollient / texture enhancer | C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active. |
| Diisopropyl Adipate Emollient/solvent | Diisopropyl adipate is a lightweight synthetic diester used as an emollient and solvent in cosmetic formulations. It enhances spreadability, skin feel, and helps dissolve other ingredients without leaving a greasy residue. |
| Propylene Glycol Dicaprylate/Dicaprate Emollient/skin-conditioning agent | Propylene Glycol Dicaprylate/Dicaprate is a diester of propylene glycol and caprylic/capric fatty acids used as an emollient, solvent, and skin-conditioning agent in cosmetic formulations. It imparts a light, non-greasy feel and helps soften skin while aiding the dispersion of other ingredients. |
| Diisopropyl Sebacate Emollient / solvent | Diisopropyl sebacate is an ester used as a lightweight emollient and solvent in cosmetic formulations, providing skin conditioning and improving the spreadability and penetration of other ingredients. It imparts a smooth, non-greasy feel and can act as a vehicle for active compounds. |
| Cetearyl Olivate Emulsifier / emollient | Cetearyl Olivate is an olive oil-derived emulsifier and emollient, typically used with Sorbitan Olivate, that helps blend oil and water phases while conditioning and softening the skin. It supports the skin barrier and gives formulations a light, non-greasy feel. |
| Sorbitan Olivate Emulsifier | Sorbitan Olivate is an olive-derived ester of sorbitol and olive oil fatty acids used as a non-ionic emulsifier and emollient. It is often paired with Cetearyl Olivate (as Olivem 1000) to stabilize oil-in-water emulsions and impart a soft skin feel. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine Key active UV filter (sunscreen) | Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection. |
| Acrylates/C12-22 Alkyl Methacrylate Copolymer Film former / rheology modifier | Acrylates/C12-22 Alkyl Methacrylate Copolymer is a synthetic copolymer used in cosmetics as a film-forming agent and to modify texture and viscosity. It helps improve water resistance, spreadability, and the longevity of products such as sunscreens and color cosmetics. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Centella Asiatica Extract Key active Soothing/antioxidant active | Centella Asiatica Extract is a plant-derived ingredient rich in triterpenoids (asiaticoside, madecassoside, asiatic and madecassic acids) used to calm inflammation, support wound healing, and strengthen the skin barrier. It is also valued for antioxidant and collagen-supporting properties in topical formulations. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Silica Absorbent/texturizer | Silica is a mineral-derived ingredient (silicon dioxide) used in cosmetics to absorb oil and sebum, improve texture, and act as a bulking, anti-caking, or matting agent. It is generally inert and well tolerated on skin. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Polysilicone-15 Key active UV filter / sunscreen agent | Polysilicone-15 (also known as Parsol SLX) is a silicone-based organic UV filter that absorbs UVB radiation, commonly used in sunscreens and daytime cosmetic products to provide photoprotection and improve formulation feel. It is a film-forming polymer that helps stabilize and enhance the efficacy of other UV filters. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Bisabolol Key active Soothing/anti-inflammatory agent | Bisabolol is a naturally derived (typically from chamomile) or synthetic terpene alcohol used in skincare for its anti-inflammatory, soothing, and skin-conditioning properties. It is also reported to enhance penetration of other ingredients and offers mild antimicrobial activity. |
| Sodium Polyacrylate Starch Thickener / absorbent | Sodium Polyacrylate Starch is a starch-modified superabsorbent polymer used in skincare and personal care formulations as a thickening, gelling, and water-absorbing agent. It helps stabilize emulsions, improve texture, and impart a smooth feel without contributing active therapeutic effects. |
| Glyceryl Monostearate Emulsifier / emollient | Glyceryl monostearate is a non-ionic emulsifier and thickening agent widely used in creams and lotions to blend oil and water phases and improve texture. It also provides mild skin-conditioning and emollient properties. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Octenidine HCl Key active Antiseptic/antimicrobial | Octenidine HCl is a cationic surfactant antiseptic effective against bacteria, fungi, and some viruses, used in skin and wound disinfection and as a preservative in topical formulations. It binds to negatively charged microbial cell membranes, disrupting their integrity. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Allergen Free Fragrance Fragrance/masking agent | Allergen Free Fragrance is a scent blend formulated to exclude the fragrance allergens specified by regulatory bodies (such as the 26 EU-declarable fragrance allergens), used to impart or mask odor in cosmetic products. It is intended to reduce the likelihood of fragrance-related sensitization compared with conventional fragrance. |
| Ethylhexyl Triazone Key active UVB sunscreen filter | Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF. |
| Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active UVA filter (sunscreen) | Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens. |
| C12-15 Alkyl Benzoate Emollient / texture enhancer | C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active. |
| Diisopropyl Adipate Emollient/solvent | Diisopropyl adipate is a lightweight synthetic diester used as an emollient and solvent in cosmetic formulations. It enhances spreadability, skin feel, and helps dissolve other ingredients without leaving a greasy residue. |
| Propylene Glycol Dicaprylate/Dicaprate Emollient/skin-conditioning agent | Propylene Glycol Dicaprylate/Dicaprate is a diester of propylene glycol and caprylic/capric fatty acids used as an emollient, solvent, and skin-conditioning agent in cosmetic formulations. It imparts a light, non-greasy feel and helps soften skin while aiding the dispersion of other ingredients. |
| Diisopropyl Sebacate Emollient / solvent | Diisopropyl sebacate is an ester used as a lightweight emollient and solvent in cosmetic formulations, providing skin conditioning and improving the spreadability and penetration of other ingredients. It imparts a smooth, non-greasy feel and can act as a vehicle for active compounds. |
| Cetearyl Olivate Emulsifier / emollient | Cetearyl Olivate is an olive oil-derived emulsifier and emollient, typically used with Sorbitan Olivate, that helps blend oil and water phases while conditioning and softening the skin. It supports the skin barrier and gives formulations a light, non-greasy feel. |
| Sorbitan Olivate Emulsifier | Sorbitan Olivate is an olive-derived ester of sorbitol and olive oil fatty acids used as a non-ionic emulsifier and emollient. It is often paired with Cetearyl Olivate (as Olivem 1000) to stabilize oil-in-water emulsions and impart a soft skin feel. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine Key active UV filter (sunscreen) | Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection. |
| Acrylates/C12-22 Alkyl Methacrylate Copolymer Film former / rheology modifier | Acrylates/C12-22 Alkyl Methacrylate Copolymer is a synthetic copolymer used in cosmetics as a film-forming agent and to modify texture and viscosity. It helps improve water resistance, spreadability, and the longevity of products such as sunscreens and color cosmetics. |
| Niac Formulation / support |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.