Foxtale · 🇮🇳 India

0.3% Retinol + Ferulic Acid Serum

54 ingredients
What's in it

Below is every ingredient in 0.3% Retinol + Ferulic Acid Serum explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
9 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: Low
Highest comedogenic rating 1/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens
Pregnancy: use caution
Retinol — discuss with a doctor

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Next: check the rest of your shelf

Your questions, answered from the ingredient list

Is 0.3% Retinol + Ferulic Acid Serum fungal-acne safe?
Based on its listed ingredients, 0.3% Retinol + Ferulic Acid Serum contains 5 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): Cetearyl Olivate, Ethylhexyl Palmitate, Glyceryl monostearate, Polysorbate 20, Sorbitan Olivate. If you are fungal-acne prone, you may want to avoid these.
Does 0.3% Retinol + Ferulic Acid Serum contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of 0.3% Retinol + Ferulic Acid Serum.
Will 0.3% Retinol + Ferulic Acid Serum clog pores?
The highest comedogenic rating among its listed ingredients is 1/5 (low). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is 0.3% Retinol + Ferulic Acid Serum safe to use in pregnancy?
0.3% Retinol + Ferulic Acid Serum contains 1 ingredient(s) commonly flagged for caution in pregnancy in published guidance: Retinol. Discuss with your doctor before using it while pregnant or breastfeeding.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

Niacinamide
Cell-communicating / barrier-repair active

Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.

Diethylamino Hydroxybenzoyl Hexyl Benzoate
UVA filter (sunscreen)

Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.

Ferulic Acid
Antioxidant

Ferulic acid is a plant-derived phenolic antioxidant that neutralizes free radicals and helps protect skin from UV-induced oxidative damage. It is frequently combined with vitamins C and E to enhance their stability and photoprotective effect.

Ascorbyl Glucoside
Antioxidant / vitamin C derivative

Ascorbyl Glucoside is a stable, water-soluble vitamin C derivative that is enzymatically converted to ascorbic acid in the skin, providing antioxidant protection and supporting collagen synthesis and skin brightening. It is generally considered milder and more stable than pure L-ascorbic acid.

Tocopheryl Acetate
Antioxidant

Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.

Retinol
Vitamin A derivative / anti-aging active

Retinol is a vitamin A derivative that converts to retinoic acid in the skin, promoting cell turnover and stimulating collagen synthesis. It is widely used to address fine lines, photoaging, and acne.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Irritation or sensitivityVery rarePurified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water.
Transepidermal water loss aggravation in compromised skinRareEvaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent.
Mild skin irritation or stingingCommonMore likely at higher concentrations or on compromised/sensitive skin
Allergic contact dermatitisUncommonRecognized contact allergen; confirmed via patch testing
Irritant contact dermatitisUncommonNon-allergic irritation, often dose-dependent
Worsening of pre-existing eczema or barrier-impaired skinRarePenetration-enhancing effect may increase reactivity
Systemic toxicity from topical useVery rareReported mainly with extensive application on broken skin, especially in infants or burn patients
Mild skin irritationRareGenerally well tolerated; occasional transient redness or irritation in sensitive individuals.
Contact dermatitis / allergic reactionVery rareIsolated reports; considered a low-sensitizing ingredient.
Comedogenicity (pore clogging)RareLow comedogenic potential, but possible in acne-prone skin at high concentrations.
Mild contact irritationRareOccasional redness or stinging, usually in sensitive or compromised skin.
Comedogenicity / clogged poresRareGenerally low comedogenic potential, but acne-prone individuals may occasionally react.
Comedogenic reactionRarePossible pore congestion in acne-prone individuals depending on overall formulation.
Irritation or contact dermatitisRareGenerally well tolerated; occasional mild irritation reported in sensitive individuals.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Aqua
Solvent / vehicle
Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery.
Propylene glycol
Humectant / solvent
Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active.
Dicaprylyl Carbonate
Emollient / texture enhancer
Dicaprylyl Carbonate is a lightweight, non-greasy emollient derived from coconut-based fatty alcohols and carbonic acid, used to improve skin feel and spreadability in cosmetic formulations. It also acts as a solvent and helps distribute pigments and other ingredients evenly.
Caprylic/capric triglyceride
Emollient / skin-conditioning agent
Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active.
Cetearyl Olivate
Emulsifier / emollient
Cetearyl Olivate is an olive oil-derived emulsifier and emollient, typically used with Sorbitan Olivate, that helps blend oil and water phases while conditioning and softening the skin. It supports the skin barrier and gives formulations a light, non-greasy feel.
Sorbitan Olivate
Emulsifier
Sorbitan Olivate is an olive-derived ester of sorbitol and olive oil fatty acids used as a non-ionic emulsifier and emollient. It is often paired with Cetearyl Olivate (as Olivem 1000) to stabilize oil-in-water emulsions and impart a soft skin feel.
Glyceryl monostearate
Emulsifier / emollient
Glyceryl monostearate is a non-ionic emulsifier and thickening agent widely used in creams and lotions to blend oil and water phases and improve texture. It also provides mild skin-conditioning and emollient properties.
Niacinamide Key active
Cell-communicating / barrier-repair active
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active
UVA filter (sunscreen)
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Behenyl alcohol
Emollient / Thickener
Behenyl alcohol is a fatty alcohol derived from behenic acid that functions as an emollient, thickening agent, and emulsion stabilizer in cosmetic and skincare formulations. It helps soften the skin and improve product texture and stability.
Phenoxyethanol
Preservative
Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment.
Ferulic Acid Key active
Antioxidant
Ferulic acid is a plant-derived phenolic antioxidant that neutralizes free radicals and helps protect skin from UV-induced oxidative damage. It is frequently combined with vitamins C and E to enhance their stability and photoprotective effect.
Ascorbyl Glucoside Key active
Antioxidant / vitamin C derivative
Ascorbyl Glucoside is a stable, water-soluble vitamin C derivative that is enzymatically converted to ascorbic acid in the skin, providing antioxidant protection and supporting collagen synthesis and skin brightening. It is generally considered milder and more stable than pure L-ascorbic acid.
Tocopheryl Acetate Key active
Antioxidant
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Retinol Key active
Vitamin A derivative / anti-aging active
Retinol is a vitamin A derivative that converts to retinoic acid in the skin, promoting cell turnover and stimulating collagen synthesis. It is widely used to address fine lines, photoaging, and acne.
Garcinia indica seed butter
Emollient / occlusive
Garcinia Indica (kokum) Seed Butter is a plant-derived butter rich in stearic and oleic fatty acids, used in skincare to soften, condition, and provide a protective occlusive barrier. It is valued for being non-greasy and restorative for dry or compromised skin.
Polysorbate 20
Emulsifier / solubilizer
Polysorbate 20 is a nonionic surfactant derived from sorbitol and lauric acid, used in skincare to solubilize fragrances and essential oils and to stabilize oil-in-water emulsions. It functions primarily as a formulation aid rather than a treatment active.
BHA Key active
Chemical exfoliant
BHA (beta hydroxy acid), most commonly salicylic acid, is an oil-soluble exfoliant that penetrates pores to dissolve excess sebum and dead skin cells. It is widely used to treat acne, blackheads, and to improve skin texture and oiliness.
Allantoin Key active
Soothing/skin-conditioning agent
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Dimethicone
Emollient/occlusive (silicone)
Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active.
Polymethylsilsesquioxane
Texture enhancer / mattifying agent
Polymethylsilsesquioxane is a silicone-based spherical powder used in skincare and cosmetics to impart a smooth, soft-focus, mattifying feel and improve spreadability. It is a formulation/texture ingredient rather than a treatment active.
Tocopherol Key active
Antioxidant
Tocopherol (vitamin E) is a lipid-soluble antioxidant used in skincare to protect skin and formulations from oxidative damage caused by free radicals and UV exposure. It also functions as a skin-conditioning and emollient agent and can stabilize oils against rancidity.
Ammonium Acryloyldimethyltaurate/VP Copolymer
Thickener/stabilizer
Ammonium Acryloyldimethyltaurate/VP Copolymer is a synthetic acrylic copolymer used in skincare to thicken, gel, and stabilize emulsions, providing viscosity control and a smooth texture. It functions as a rheology modifier and film former rather than a biologically active treatment ingredient.
Disodium EDTA
Chelating agent
Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active.
Butylated hydroxy toluene
Antioxidant/preservative
Butylated Hydroxy Toluene (BHT) is a synthetic antioxidant added to cosmetic formulations to prevent oxidation and rancidity of oils and fats, helping extend product shelf life. It functions as a stabilizing base ingredient rather than a skin-treatment active.
Sodium Hyaluronate
Humectant / hydrator
Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid.
Ethylhexyl Palmitate
Emollient / skin-conditioning agent
Ethylhexyl Palmitate is a lightweight ester of 2-ethylhexanol and palmitic acid used as an emollient, solvent, and texture-enhancer in cosmetics. It imparts a silky, dry feel and is often used as a synthetic substitute for mineral oil or silicones.
Silica Dimethyl Silylate
Anti-caking / texture-modifying agent
Silica Dimethyl Silylate is a hydrophobic, surface-treated silica formed by reacting silica with dimethylsiloxane groups. It is used in cosmetic formulations as a thickening, anti-caking, oil-absorbing, and texture-enhancing agent, particularly in powders, primers, and oil-based products.
Butylene Glycol
Humectant / solvent
Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations.
Pentylene Glycol
Humectant / solvent / preservative-booster
Pentylene glycol is a glycol used in cosmetics as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, helping reduce reliance on traditional preservatives. It improves skin hydration and aids the delivery and stability of other ingredients.
Ethylhexylglycerin
Preservative booster / skin-conditioning agent
Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations.
Octenidine HCl Key active
Antiseptic/antimicrobial
Octenidine HCl is a cationic surfactant antiseptic effective against bacteria, fungi, and some viruses, used in skin and wound disinfection and as a preservative in topical formulations. It binds to negatively charged microbial cell membranes, disrupting their integrity.
Propylene glycol
Humectant / solvent
Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active.
Dicaprylyl Carbonate
Emollient / texture enhancer
Dicaprylyl Carbonate is a lightweight, non-greasy emollient derived from coconut-based fatty alcohols and carbonic acid, used to improve skin feel and spreadability in cosmetic formulations. It also acts as a solvent and helps distribute pigments and other ingredients evenly.
Caprylic/capric triglyceride
Emollient / skin-conditioning agent
Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active.
Cetearyl Olivate
Emulsifier / emollient
Cetearyl Olivate is an olive oil-derived emulsifier and emollient, typically used with Sorbitan Olivate, that helps blend oil and water phases while conditioning and softening the skin. It supports the skin barrier and gives formulations a light, non-greasy feel.
Sorbitan Olivate
Emulsifier
Sorbitan Olivate is an olive-derived ester of sorbitol and olive oil fatty acids used as a non-ionic emulsifier and emollient. It is often paired with Cetearyl Olivate (as Olivem 1000) to stabilize oil-in-water emulsions and impart a soft skin feel.
Glyceryl monostearate
Emulsifier / emollient
Glyceryl monostearate is a non-ionic emulsifier and thickening agent widely used in creams and lotions to blend oil and water phases and improve texture. It also provides mild skin-conditioning and emollient properties.
Niacinamide Key active
Cell-communicating / barrier-repair active
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active
UVA filter (sunscreen)
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Behenyl alcohol
Emollient / Thickener
Behenyl alcohol is a fatty alcohol derived from behenic acid that functions as an emollient, thickening agent, and emulsion stabilizer in cosmetic and skincare formulations. It helps soften the skin and improve product texture and stability.
Phenoxyethanol
Preservative
Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment.
Ferulic Acid Key active
Antioxidant
Ferulic acid is a plant-derived phenolic antioxidant that neutralizes free radicals and helps protect skin from UV-induced oxidative damage. It is frequently combined with vitamins C and E to enhance their stability and photoprotective effect.
Ascorbyl Glucoside Key active
Antioxidant / vitamin C derivative
Ascorbyl Glucoside is a stable, water-soluble vitamin C derivative that is enzymatically converted to ascorbic acid in the skin, providing antioxidant protection and supporting collagen synthesis and skin brightening. It is generally considered milder and more stable than pure L-ascorbic acid.
Tocopheryl Acetate Key active
Antioxidant
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Retinol Key active
Vitamin A derivative / anti-aging active
Retinol is a vitamin A derivative that converts to retinoic acid in the skin, promoting cell turnover and stimulating collagen synthesis. It is widely used to address fine lines, photoaging, and acne.
Garcinia indica seed butter
Emollient / occlusive
Garcinia Indica (kokum) Seed Butter is a plant-derived butter rich in stearic and oleic fatty acids, used in skincare to soften, condition, and provide a protective occlusive barrier. It is valued for being non-greasy and restorative for dry or compromised skin.
Polysorbate 20
Emulsifier / solubilizer
Polysorbate 20 is a nonionic surfactant derived from sorbitol and lauric acid, used in skincare to solubilize fragrances and essential oils and to stabilize oil-in-water emulsions. It functions primarily as a formulation aid rather than a treatment active.
BHA Key active
Chemical exfoliant
BHA (beta hydroxy acid), most commonly salicylic acid, is an oil-soluble exfoliant that penetrates pores to dissolve excess sebum and dead skin cells. It is widely used to treat acne, blackheads, and to improve skin texture and oiliness.
Allantoin Key active
Soothing/skin-conditioning agent
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Dimethicone
Emollient/occlusive (silicone)
Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active.
Polymethylsilsesquioxane
Texture enhancer / mattifying agent
Polymethylsilsesquioxane is a silicone-based spherical powder used in skincare and cosmetics to impart a smooth, soft-focus, mattifying feel and improve spreadability. It is a formulation/texture ingredient rather than a treatment active.
Tocopherol Key active
Antioxidant
Tocopherol (vitamin E) is a lipid-soluble antioxidant used in skincare to protect skin and formulations from oxidative damage caused by free radicals and UV exposure. It also functions as a skin-conditioning and emollient agent and can stabilize oils against rancidity.
Ammonium Acrylo
Thickener/Stabilizer
Ammonium Acryloyldimethyltaurate copolymers (commonly abbreviated in ingredient lists as 'Ammonium Acrylo...') are synthetic acrylate-based polymers used as rheology modifiers, emulsion stabilizers, and thickening agents in creams, gels, and lotions. They help create stable, smooth textures rather than providing a direct therapeutic skin benefit.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

PROMOTION · OUR OWN APP — THE FREE TOOLS WORK WITHOUT IT
◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →