Based on its listed ingredients, Pore Clarifying Swirl Mask can feed fungal acne; has a pregnancy-caution ingredient — details in the flags below.
Below is every ingredient in Pore Clarifying Swirl Mask explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Salicylic acid is a lipid-soluble beta-hydroxy acid that exfoliates the skin surface and penetrates sebaceous pores to loosen and dissolve keratin and debris. It is widely used to treat acne, blackheads, and conditions involving thickened or scaly skin.
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Zinc gluconate is a zinc salt of gluconic acid used topically and orally for its anti-inflammatory, antibacterial, and sebum-regulating properties, often in acne and oily-skin formulations. It supplies bioavailable zinc that supports skin barrier function and wound healing.
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Clitoria Ternatea (butterfly pea) flower extract is a plant-derived ingredient rich in anthocyanins and flavonoids, used in skincare for its antioxidant and skin-soothing properties as well as natural blue pigmentation. It is valued for protecting against oxidative stress and supporting skin barrier comfort.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
Skin dryness or tightness | Common | Due to its oil-absorbing properties, especially with overuse or on already dry skin. |
Mild skin irritation or redness | Uncommon | Typically transient and related to overuse or sensitive skin. |
Allergic contact dermatitis | Rare | Hypersensitivity reactions to kaolin or accompanying ingredients are infrequently reported. |
Respiratory irritation from powder inhalation | Rare | Relevant mainly to loose powder formulations during application, not topical use. |
Mild skin irritation | Uncommon | Transient stinging or redness, more likely on compromised or sensitive skin. |
Enhanced penetration of co-formulated irritants | Uncommon | As a penetration enhancer it may increase absorption and irritation potential of other actives. |
Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
Skin dryness and peeling | Common | Mild flaking or tightness, especially with frequent use or higher concentrations. |
Stinging, burning, or irritation | Common | Transient sensation on application, often more pronounced on sensitive or compromised skin. |
Erythema (redness) | Common | Temporary redness at the application site. |
Contact dermatitis | Uncommon | Localized inflammation; can be irritant or, less often, allergic in nature. |
Increased photosensitivity | Uncommon | Exfoliation may heighten sun sensitivity; sunscreen use is advised. |
Salicylism (systemic toxicity) | Rare | Reported with extensive application over large body areas, high concentrations, or occlusion; symptoms include nausea, tinnitus, and dizziness. |
Severe allergic reaction | Very rare | Hypersensitivity reactions such as significant swelling or hives. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| kaolin Absorbent/clay cleanser | Kaolin is a naturally occurring soft white clay (hydrated aluminum silicate) used in skincare to absorb excess sebum, oil, and impurities. It is commonly found in face masks, cleansers, and powders as a mattifying and gentle exfoliating agent. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Salicylic Acid Key active Beta-hydroxy acid (BHA) exfoliant / keratolytic | Salicylic acid is a lipid-soluble beta-hydroxy acid that exfoliates the skin surface and penetrates sebaceous pores to loosen and dissolve keratin and debris. It is widely used to treat acne, blackheads, and conditions involving thickened or scaly skin. |
| Bentonite Absorbent clay / mask base | Bentonite is a montmorillonite-rich absorbent clay used in masks and cleansers to adsorb excess sebum, oils, and impurities from the skin. It also acts as a thickening and stabilizing agent in cosmetic formulations. |
| Cetearyl alcohol Emollient/emulsifier | Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions. |
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| PEG-40 hydrogenated castor oil Solubilizer/emulsifier | PEG-40 Hydrogenated Castor Oil is a nonionic surfactant derived from hydrogenated castor oil reacted with ethylene oxide, widely used to dissolve fragrances and oils into water-based formulations and to stabilize emulsions. It functions as a base/formulation ingredient rather than a treatment active. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Squalane Emollient / occlusive moisturizer | Squalane is a saturated, stable hydrocarbon derived from squalene (sourced from plants like olives or sugarcane, or shark liver) used as a lightweight emollient that softens skin and reinforces the skin barrier by reducing transepidermal water loss. It is well tolerated, non-comedogenic for most users, and serves as a base or carrier ingredient rather than a therapeutic active. |
| Betaine Humectant / osmolyte | Betaine is a naturally derived amino acid derivative (trimethylglycine) used in skincare as a humectant and osmoprotectant that attracts and retains moisture while helping stabilize skin barrier function. It also improves the texture and mildness of formulations. |
| Silica Absorbent/texturizer | Silica is a mineral-derived ingredient (silicon dioxide) used in cosmetics to absorb oil and sebum, improve texture, and act as a bulking, anti-caking, or matting agent. It is generally inert and well tolerated on skin. |
| Illite Clay (absorbent/cleansing) | Illite is a natural clay mineral (a hydrated potassium aluminosilicate) used in skincare for its oil-absorbing and mild cleansing properties, commonly found in masks and cleansers. It helps draw out sebum and impurities while providing trace minerals to the skin surface. |
| Glyceryl stearate Emulsifier/emollient | Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active. |
| PEG-100 Stearate Emulsifier/surfactant | PEG-100 Stearate is a polyethylene glycol ester of stearic acid used as a nonionic surfactant and emulsifier to stabilize oil-in-water formulations and improve skin feel. It functions as a formulation base ingredient rather than a therapeutic active. |
| Magnesium aluminum Silicate Thickener/viscosity controller | Magnesium Aluminum Silicate is a naturally derived clay mineral used in cosmetics as a thickening, suspending, and stabilizing agent. It helps create smooth, uniform textures and prevents separation in creams, lotions, and masks. |
| Titanium dioxide Key active UV filter / mineral sunscreen | Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin. |
| Hydroxyethylcellulose Thickener/viscosity modifier | Hydroxyethylcellulose is a non-ionic, water-soluble cellulose derivative used to thicken, stabilize, and adjust the texture of aqueous cosmetic formulations. It functions as a gelling and film-forming agent rather than providing a direct biological skin benefit. |
| Volcanic Ash Absorbent / exfoliant | Volcanic ash is a finely milled mineral powder derived from volcanic deposits, used in skincare for its porous structure that absorbs excess oil and provides mild physical exfoliation. It is commonly found in cleansers, masks, and soaps aimed at oily or acne-prone skin. |
| Zinc Gluconate Key active Sebum regulator / anti-inflammatory | Zinc gluconate is a zinc salt of gluconic acid used topically and orally for its anti-inflammatory, antibacterial, and sebum-regulating properties, often in acne and oily-skin formulations. It supplies bioavailable zinc that supports skin barrier function and wound healing. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Octenidine HCI Formulation / support | |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Sodium Benzoate Preservative | Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Hydrolyzed Rhodophycea Extract Formulation / support | |
| Kaolin Absorbent/clay cleanser | Kaolin is a naturally occurring soft white clay (hydrated aluminum silicate) used in skincare to absorb excess sebum, oil, and impurities. It is commonly found in face masks, cleansers, and powders as a mattifying and gentle exfoliating agent. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Saccharide Isomerate Humectant / moisturizer | Saccharide Isomerate is a plant-derived carbohydrate complex that binds to the skin's keratin to provide long-lasting hydration and improve moisture retention. It is structurally similar to carbohydrates naturally found in the skin's upper layers. |
| Clitoria Ternatea Flower Extract Key active Antioxidant / botanical extract | Clitoria Ternatea (butterfly pea) flower extract is a plant-derived ingredient rich in anthocyanins and flavonoids, used in skincare for its antioxidant and skin-soothing properties as well as natural blue pigmentation. It is valued for protecting against oxidative stress and supporting skin barrier comfort. |
| Bentonite Absorbent clay / mask base | Bentonite is a montmorillonite-rich absorbent clay used in masks and cleansers to adsorb excess sebum, oils, and impurities from the skin. It also acts as a thickening and stabilizing agent in cosmetic formulations. |
| Ammonium Acryloyldimethyltaurate/VP Copolymer Thickener/stabilizer | Ammonium Acryloyldimethyltaurate/VP Copolymer is a synthetic acrylic copolymer used in skincare to thicken, gel, and stabilize emulsions, providing viscosity control and a smooth texture. It functions as a rheology modifier and film former rather than a biologically active treatment ingredient. |
| Carbomer Thickener / gelling agent | Carbomer is a synthetic high-molecular-weight polymer of acrylic acid used to thicken, stabilize, and control the viscosity of gels, creams, and lotions. It functions as a formulation aid rather than a therapeutic active. |
| Behenyl Alcohol Emollient / Thickener | Behenyl alcohol is a fatty alcohol derived from behenic acid that functions as an emollient, thickening agent, and emulsion stabilizer in cosmetic and skincare formulations. It helps soften the skin and improve product texture and stability. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Octenidine HCI Formulation / support | |
| Potassium Cetyl Phosphate Emulsifier | Potassium Cetyl Phosphate is an anionic emulsifier and surfactant used in oil-in-water formulations to stabilize emulsions and improve texture. It is considered a formulation/base ingredient rather than a treatment active. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Citric Acid pH adjuster / AHA exfoliant | Citric acid is an alpha-hydroxy acid derived from citrus fruits, used primarily to adjust and buffer formulation pH and as a chelating agent, and at higher concentrations as a mild chemical exfoliant. It can promote surface cell turnover and is sometimes included in antioxidant or brightening products. |
| kaolin Absorbent/clay cleanser | Kaolin is a naturally occurring soft white clay (hydrated aluminum silicate) used in skincare to absorb excess sebum, oil, and impurities. It is commonly found in face masks, cleansers, and powders as a mattifying and gentle exfoliating agent. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Salicylic Acid Key active Beta-hydroxy acid (BHA) exfoliant / keratolytic | Salicylic acid is a lipid-soluble beta-hydroxy acid that exfoliates the skin surface and penetrates sebaceous pores to loosen and dissolve keratin and debris. It is widely used to treat acne, blackheads, and conditions involving thickened or scaly skin. |
| Bentonite Absorbent clay / mask base | Bentonite is a montmorillonite-rich absorbent clay used in masks and cleansers to adsorb excess sebum, oils, and impurities from the skin. It also acts as a thickening and stabilizing agent in cosmetic formulations. |
| Cetearyl alcohol Emollient/emulsifier | Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions. |
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| PEG-40 hydrogenated castor oil Solubilizer/emulsifier | PEG-40 Hydrogenated Castor Oil is a nonionic surfactant derived from hydrogenated castor oil reacted with ethylene oxide, widely used to dissolve fragrances and oils into water-based formulations and to stabilize emulsions. It functions as a base/formulation ingredient rather than a treatment active. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Squalane Emollient / occlusive moisturizer | Squalane is a saturated, stable hydrocarbon derived from squalene (sourced from plants like olives or sugarcane, or shark liver) used as a lightweight emollient that softens skin and reinforces the skin barrier by reducing transepidermal water loss. It is well tolerated, non-comedogenic for most users, and serves as a base or carrier ingredient rather than a therapeutic active. |
| Betaine Humectant / osmolyte | Betaine is a naturally derived amino acid derivative (trimethylglycine) used in skincare as a humectant and osmoprotectant that attracts and retains moisture while helping stabilize skin barrier function. It also improves the texture and mildness of formulations. |
| Silica Absorbent/texturizer | Silica is a mineral-derived ingredient (silicon dioxide) used in cosmetics to absorb oil and sebum, improve texture, and act as a bulking, anti-caking, or matting agent. It is generally inert and well tolerated on skin. |
| Illite Clay (absorbent/cleansing) | Illite is a natural clay mineral (a hydrated potassium aluminosilicate) used in skincare for its oil-absorbing and mild cleansing properties, commonly found in masks and cleansers. It helps draw out sebum and impurities while providing trace minerals to the skin surface. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.