Based on its listed ingredients, Strawberry Dew Tinted Sunscreen SPF 50+ PA++++ can feed fungal acne — details in the flags below.
Below is every ingredient in Strawberry Dew Tinted Sunscreen SPF 50+ PA++++ explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Fragaria Ananassa (Strawberry) Fruit Extract is a botanical extract rich in vitamin C, ellagic acid, and polyphenols used in cosmetics for antioxidant and skin-conditioning effects. It also contains naturally occurring fruit acids that may provide mild exfoliating and brightening benefits.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
Mild skin irritation or stinging | Uncommon | Usually transient, more likely on compromised or sensitive skin or at high concentrations. |
Allergic contact dermatitis | Rare | Documented in patch-test case reports; considered a low-frequency sensitizer. |
Eye irritation | Uncommon | Can occur with direct contact in eye-area products. |
Skin dryness | Uncommon | Its volatility can contribute to a dry or tight feeling on the skin with frequent use. |
Irritation | Rare | Mild irritation or stinging may occur, particularly on sensitive or compromised skin. |
Sticky or tacky skin feel | Common | Cosmetic sensation at higher concentrations, not a health concern. |
Mild transient stinging or irritation | Uncommon | More likely on broken or compromised skin or with high concentrations. |
Skin dryness or moisture-wicking in very low humidity | Uncommon | Can theoretically draw water from skin in extremely dry environments if not paired with occlusives. |
Skin irritation | Rare | Generally considered low-irritant; mild irritation reported occasionally, often related to other formulation components. |
Acneiform breakouts / pore congestion | Rare | Considered low comedogenic potential, but occlusive film may contribute in acne-prone individuals. |
Mild skin irritation | Uncommon | Transient stinging or redness, more likely on compromised or sensitive skin. |
Enhanced penetration of co-formulated irritants | Uncommon | As a penetration enhancer it may increase absorption and irritation potential of other actives. |
Mild transient skin irritation or stinging | Rare | Generally well tolerated; occasional irritation reported, often in sensitive or compromised skin. |
Comedogenicity / pore congestion | Rare | Oleate/linoleate components carry low comedogenic potential in acne-prone individuals. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| 3-Butylene Glycol Humectant/solvent | 3-Butylene glycol (butylene glycol) is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent. It helps attract moisture, dissolve other ingredients, and improve product texture and preservation. |
| Isododecane Emollient/solvent | Isododecane is a lightweight, volatile branched-chain hydrocarbon used as a solvent and emollient in cosmetics. It spreads easily and evaporates quickly, improving texture and wear in products like long-lasting makeup, primers, and sunscreens. |
| Glycerine Humectant | Glycerine (glycerol) is a humectant that draws water into the stratum corneum and helps maintain skin hydration and barrier function. It is widely used as a base/formulation ingredient in moisturizers, cleansers, and serums. |
| Phenyl Trimethicone Silicone emollient/conditioning agent | Phenyl Trimethicone is a phenyl-substituted silicone used in skincare and cosmetics to impart a smooth, silky feel, add shine, and provide water-repellent film-forming and conditioning properties. It functions as a formulation/base ingredient rather than a treatment active. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Glyceryl Citrate/Lactate/Linoleate/Oleate Emulsifier / emollient | Glyceryl Citrate/Lactate/Linoleate/Oleate is a glycerin-derived ester blend used as a non-ionic oil-in-water emulsifier and skin-conditioning agent in creams and lotions. It helps stabilize emulsions while imparting a smooth, moisturizing feel and supporting skin barrier function. |
| Cyclopentasiloxane Emollient/silicone | Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations. |
| Cyclopentasiloxane (and) Dimethicone Cross polymer Formulation / support | |
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Dicaprylyl Carbonate Emollient / texture enhancer | Dicaprylyl Carbonate is a lightweight, non-greasy emollient derived from coconut-based fatty alcohols and carbonic acid, used to improve skin feel and spreadability in cosmetic formulations. It also acts as a solvent and helps distribute pigments and other ingredients evenly. |
| Zea Mays (Corn) Starch Absorbent / anti-caking agent | Zea Mays (Corn) Starch is a natural polysaccharide powder derived from corn kernels, used in cosmetics to absorb moisture and oil, impart a soft matte feel, and act as a bulking or anti-caking agent. It is a formulation/base ingredient rather than a therapeutic active. |
| Fragaria Ananassa (Strawberry) Fruit Extract Key active Antioxidant / skin conditioning | Fragaria Ananassa (Strawberry) Fruit Extract is a botanical extract rich in vitamin C, ellagic acid, and polyphenols used in cosmetics for antioxidant and skin-conditioning effects. It also contains naturally occurring fruit acids that may provide mild exfoliating and brightening benefits. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Panthenol Humectant / skin-conditioning agent | Panthenol (provitamin B5) is converted to pantothenic acid in the skin, where it acts as a humectant and helps support skin barrier function and hydration. It is also used for its soothing and mild anti-inflammatory properties in topical formulations. |
| Tocopheryl acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Polyglyceryl-3 Polyricinoleate Emulsifier | Polyglyceryl-3 Polyricinoleate (PGPR) is a polyglycerol ester of polyricinoleic acid (derived from castor oil) used as a lipophilic emulsifier and stabilizer, primarily in water-in-oil emulsions and lip/color cosmetics. It helps reduce viscosity and stabilize oil-based formulations. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Polyacrylate Crosspolymer-6 Film-forming/sensory-enhancing rheology modifier | Polyacrylate Crosspolymer-6 is a synthetic crosslinked acrylate polymer used in skincare and cosmetic formulations to provide a smooth, silky sensory feel, stabilize emulsions, and help form a light film on the skin. It is a formulation aid rather than a biologically active treatment ingredient. |
| Polyacrylate-13 (and) Polyisobutene (and) Polysorbate 20 Rheology modifier / emulsion stabilizer | A pre-neutralized liquid thickener blend used to stabilize emulsions and provide consistent viscosity in cosmetic formulations. It functions purely as a texturizing and stabilizing system rather than delivering a skin treatment benefit. |
| Sodium Gluconate Chelating agent / skin-conditioning | Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment. |
| Phenoxyethanol (and) Ethylhexylglycerin Preservative | A widely used preservative blend combining phenoxyethanol with ethylhexylglycerin, which also acts as a skin-conditioning agent and boosts antimicrobial efficacy. It protects formulations from bacterial, yeast, and mold contamination. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.