Below is every ingredient in AQUA SURGE® FACE MOISTURIZER | SPF 60 | PA++++ explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Ethylhexyl Salicylate (octisalate) is an oil-soluble organic UVB filter used in sunscreens to absorb ultraviolet radiation in the 295-315 nm range. It is also valued as a solvent that helps stabilize and dissolve other UV filters in formulations.
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection.
Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF.
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Homosalate is an organic (chemical) UV filter primarily absorbing UVB radiation, commonly used in sunscreens to help prevent sunburn. It is often combined with other filters as it is relatively unstable and offers limited UVA protection on its own.
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Mild transient stinging or irritation | Rare | Generally very well tolerated; minor irritation reported mostly on compromised skin |
| Allergic contact dermatitis | Very rare | Isolated sensitization reports, uncommon for this ingredient |
| Redness or tingling | Rare | Typically resolves quickly after discontinuation |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Mild transient skin irritation or stinging | Rare | Typically minor and self-limiting, more likely on compromised skin |
| Irritation or stinging on sensitive or compromised skin | Rare | Generally well tolerated; mild transient reactions possible. |
| Contact allergy or sensitization | Very rare | Glucose is a naturally occurring sugar and rarely implicated in allergic contact dermatitis. |
| Mild transient irritation or stinging | Rare | Generally well tolerated; occasional mild reactions reported, often related to overall formulation rather than the ingredient itself. |
| Contact allergy / sensitization | Very rare | Allergic responses are uncommon for sugar-derived humectants; isolated cases possible in sensitive individuals. |
| Mild skin irritation or redness | Rare | Possible in sensitive individuals, often related to formulation rather than the extract itself. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Betaine Humectant / osmolyte | Betaine is a naturally derived amino acid derivative (trimethylglycine) used in skincare as a humectant and osmoprotectant that attracts and retains moisture while helping stabilize skin barrier function. It also improves the texture and mildness of formulations. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Xylitol Humectant / moisturizer | Xylitol is a sugar alcohol used in topical formulations as a humectant that helps attract and retain moisture in the skin, and it may support the skin's microbiome and barrier function. It is generally well tolerated and considered safe for topical use. |
| Glucose Humectant/skin-conditioning agent | Glucose is a simple sugar used in skincare primarily as a humectant and skin-conditioning ingredient, helping to attract and retain moisture in the skin. It can also serve as a substrate in formulations and contributes to the skin's natural moisturizing factors. |
| Anhydroxylitol Humectant / moisturizing agent | Anhydroxylitol is a sugar-derived (xylitol) humectant used in skincare to attract and retain water, helping to maintain skin hydration and barrier function. It is often combined with xylitol and xylitylglucoside to enhance the skin's natural moisturizing factors. |
| Phoenix Dactylifera Fruit Extract Antioxidant/skin conditioning | Phoenix Dactylifera (date palm) fruit extract is a botanical ingredient rich in polyphenols, flavonoids, vitamins, and sugars, used in skincare for its antioxidant and moisturizing properties. It is generally regarded as well tolerated in topical formulations. |
| Polyacrylate Crosspolymer-6 Film-forming/sensory-enhancing rheology modifier | Polyacrylate Crosspolymer-6 is a synthetic crosslinked acrylate polymer used in skincare and cosmetic formulations to provide a smooth, silky sensory feel, stabilize emulsions, and help form a light film on the skin. It is a formulation aid rather than a biologically active treatment ingredient. |
| Sodium Stearoyl Glutamate Emulsifier / surfactant | Sodium Stearoyl Glutamate is a mild, amino-acid-derived (glutamic acid and stearic acid) anionic surfactant used primarily as an emulsifier and co-emulsifier to stabilize oil-in-water formulations. It is well tolerated and often chosen for gentle, naturally derived cosmetic systems. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Ethylhexyl Salicylate Key active UV filter (UVB sunscreen) | Ethylhexyl Salicylate (octisalate) is an oil-soluble organic UVB filter used in sunscreens to absorb ultraviolet radiation in the 295-315 nm range. It is also valued as a solvent that helps stabilize and dissolve other UV filters in formulations. |
| Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine Key active UV filter (sunscreen) | Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection. |
| Octocrylene Key active UV filter | Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF. |
| Ethylhexyl Methoxycinnamate Key active UV filter (UVB sunscreen) | Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims. |
| Homosalate Key active UV filter (sunscreen) | Homosalate is an organic (chemical) UV filter primarily absorbing UVB radiation, commonly used in sunscreens to help prevent sunburn. It is often combined with other filters as it is relatively unstable and offers limited UVA protection on its own. |
| Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active UVA filter (sunscreen) | Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens. |
| Cyclopentasiloxane Emollient/silicone | Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations. |
| Phenyltrimethicone Silicone emollient/conditioning agent | Phenyltrimethicone is a phenyl-substituted silicone fluid used in skincare and cosmetics as an emollient and conditioning agent, imparting spreadability, gloss, and a smooth feel. It also helps reduce tackiness and improve the sensory texture of formulations. |
| Dimethiconol Emollient/silicone conditioning agent | Dimethiconol is a silicone-based polymer used in skincare and haircare to provide smoothing, conditioning, and a soft, non-greasy emollient feel. It forms a thin, breathable film that reduces moisture loss and improves spreadability of formulations. |
| C12-15 Alkyl Benzoate Emollient / texture enhancer | C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active. |
| Dimethicone Crosspolymer Silicone-based texture enhancer/film former | Dimethicone Crosspolymer is a crosslinked silicone polymer used in skincare and cosmetics to provide a smooth, silky feel, absorb excess oil, blur the appearance of pores and fine lines, and improve product spreadability. It functions as a formulation ingredient rather than a therapeutic active. |
| Methyl Methacrylate Crosspolymer Texture enhancer / mattifying agent | Methyl Methacrylate Crosspolymer is a synthetic polymer used in cosmetics as a film-former and oil-absorbing powder that imparts a smooth, soft-focus, matte feel to formulations. It functions primarily as a sensory and texturizing base ingredient rather than a skin-treatment active. |
| Dibutyl Lauroyl Glutamide Gelling agent / rheology modifier | Dibutyl Lauroyl Glutamide is an amino acid–derived oil-gelling agent used to thicken and structure anhydrous and oil-based cosmetic formulations such as serums, sticks, and balms. It is a formulation/texturizing ingredient rather than a biologically active treatment. |
| Dibutyl Ethylhexanoyl Glutamide Gelling agent / thickener | Dibutyl Ethylhexanoyl Glutamide is an amino acid (glutamic acid) derived oil-gelling agent used to thicken and structure anhydrous or oil-based cosmetic formulations. It is typically paired with Dibutyl Lauroyl Glutamide to form stable, transparent oil gels in products like cleansing oils, balms, and serums. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Triethylene Glycol Solvent / humectant | Triethylene glycol is a low-molecular-weight glycol used in cosmetic formulations primarily as a solvent and humectant, helping to dissolve ingredients and retain moisture. It is considered a base/formulation ingredient rather than a treatment active. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.