Foxtale · 🇮🇳 India

Golden Armour Body Glow Sunscreen SPF 50, In-Vivo Tested with PA+++

39 ingredients
What's in it

Below is every ingredient in Golden Armour Body Glow Sunscreen SPF 50, In-Vivo Tested with PA+++ explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
3 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: High
Highest comedogenic rating 5/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Next: check the rest of your shelf

Your questions, answered from the ingredient list

Is Golden Armour Body Glow Sunscreen SPF 50, In-Vivo Tested with PA+++ fungal-acne safe?
Based on its listed ingredients, Golden Armour Body Glow Sunscreen SPF 50, In-Vivo Tested with PA+++ contains 3 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): Glyceryl Stearate, Isopropyl myristate, PEG-100 Stearate. If you are fungal-acne prone, you may want to avoid these.
Does Golden Armour Body Glow Sunscreen SPF 50, In-Vivo Tested with PA+++ contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of Golden Armour Body Glow Sunscreen SPF 50, In-Vivo Tested with PA+++.
Will Golden Armour Body Glow Sunscreen SPF 50, In-Vivo Tested with PA+++ clog pores?
The highest comedogenic rating among its listed ingredients is 5/5 (high). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is Golden Armour Body Glow Sunscreen SPF 50, In-Vivo Tested with PA+++ safe to use in pregnancy?
None of its listed ingredients are flagged for pregnancy caution in our reference data — but always confirm your full routine with your own doctor.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

Ethylhexyl Methoxycinnamate
UV filter (UVB sunscreen)

Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.

Diethylamino Hydroxybenzoyl Hexyl Benzoate
UVA filter (sunscreen)

Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.

Ethylhexyl Triazone
UVB sunscreen filter

Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF.

Niacinamide
Cell-communicating / barrier-repair active

Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.

Methylene Bis-Benzotriazolyl Tetramethylbutylphenol
UV filter (broad-spectrum)

Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters.

3-O-Ethyl Ascorbic Acid
Antioxidant / brightening vitamin C derivative

3-O-Ethyl Ascorbic Acid is a stable, water-soluble ethylated derivative of vitamin C that converts to ascorbic acid in the skin, providing antioxidant protection and supporting collagen synthesis and pigmentation control. It is valued for greater stability than pure L-ascorbic acid while delivering similar brightening and anti-aging benefits.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Irritation or sensitivityVery rarePurified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water.
Transepidermal water loss aggravation in compromised skinRareEvaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent.
Skin irritationRareGenerally well tolerated; mild irritation possible in sensitive individuals.
Allergic contact dermatitisRareUncommon sensitization reactions reported, sometimes linked to benzoate component.
Comedogenicity / breakoutsUncommonLow comedogenic potential but may contribute to clogged pores in acne-prone skin.
Contact urticariaVery rareIsolated reports of hive-like reactions tied to benzoate moiety.
Contact irritation or mild stingingUncommonTransient skin irritation, especially on sensitive or compromised skin.
Photoallergic contact dermatitisRareReaction triggered by combined exposure to the ingredient and sunlight.
Potential endocrine/estrogenic activityVery rareSuggested by in vitro and animal studies; human relevance at cosmetic exposure levels remains uncertain.
Comedogenicity (acne/clogged pores)CommonConsidered a moderately to highly comedogenic ingredient; may worsen acne or cause breakouts in acne-prone individuals.
FolliculitisRareFollicular irritation linked to its occlusive and pore-clogging tendency.
Mild skin irritationRareGenerally considered non-irritating; occasional mild reactions reported.
Contact allergy/sensitizationVery rareSilicones are low-allergenicity; documented allergic reactions are exceptional.
Eye irritationRarePossible transient stinging if product enters the eyes.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Aqua
Solvent / vehicle
Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery.
C12-15 Alkyl Benzoate
Emollient / texture enhancer
C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active.
Ethylhexyl Methoxycinnamate Key active
UV filter (UVB sunscreen)
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Isopropyl myristate
Emollient / skin-conditioning agent
Isopropyl myristate is a synthetic ester of isopropyl alcohol and myristic acid used as an emollient, thickening reducer, and penetration enhancer in cosmetic and topical formulations. It imparts a smooth, non-greasy feel and improves spreadability of products.
Cyclopentasiloxane
Emollient/silicone
Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations.
Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active
UVA filter (sunscreen)
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Glycerin
Humectant
Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations.
Glyceryl Stearate
Emulsifier/emollient
Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active.
PEG-100 Stearate
Emulsifier/surfactant
PEG-100 Stearate is a polyethylene glycol ester of stearic acid used as a nonionic surfactant and emulsifier to stabilize oil-in-water formulations and improve skin feel. It functions as a formulation base ingredient rather than a therapeutic active.
Cetyl alcohol
Emollient / emulsifier
Cetyl alcohol is a fatty alcohol used in skincare and cosmetics as an emollient, thickener, and emulsion stabilizer. It softens skin and helps maintain the consistency and texture of creams and lotions.
Ethylhexyl Triazone Key active
UVB sunscreen filter
Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF.
Propanediol
Humectant/solvent
Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives.
Niacinamide Key active
Cell-communicating / barrier-repair active
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Phenoxyethanol
Preservative
Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment.
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol Key active
UV filter (broad-spectrum)
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters.
3-O-Ethyl Ascorbic Acid Key active
Antioxidant / brightening vitamin C derivative
3-O-Ethyl Ascorbic Acid is a stable, water-soluble ethylated derivative of vitamin C that converts to ascorbic acid in the skin, providing antioxidant protection and supporting collagen synthesis and pigmentation control. It is valued for greater stability than pure L-ascorbic acid while delivering similar brightening and anti-aging benefits.
Tocopheryl acetate Key active
Antioxidant
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Laminaria Digitata Extract
Conditioning/antioxidant
Laminaria Digitata Extract is derived from brown seaweed and is used in skincare for its mineral, polysaccharide, and antioxidant content, providing skin-conditioning, hydrating, and soothing benefits. It is commonly included for its purported moisturizing and protective properties.
Cetyl-PG Hydroxyethyl Palmitamide
Skin-conditioning emollient / pseudo-ceramide
Cetyl-PG Hydroxyethyl Palmitamide is a synthetic pseudo-ceramide used to mimic natural skin ceramides, helping to support the skin barrier and reduce transepidermal water loss. It functions as an emollient and moisturizing agent commonly found in barrier-repair and dry-skin formulations.
Ceramide EOP
Skin barrier lipid
Ceramide EOP is a long-chain omega-hydroxy ceramide that helps form and maintain the skin's lipid barrier, supporting moisture retention and reducing transepidermal water loss. It is commonly used in moisturizers and barrier-repair formulations.
Ceramide NG
Skin-barrier lipid / moisturizer
Ceramide NG (formerly ceramide 2) is a synthetic skin-identical lipid that helps restore and reinforce the stratum corneum barrier, reducing transepidermal water loss and improving hydration. It is widely used in moisturizers and barrier-repair formulations.
Ceramide NP
Skin-barrier replenishing lipid / emollient
Ceramide NP (formerly ceramide 3) is a naturally occurring sphingolipid that helps restore and maintain the skin's lipid barrier, reducing transepidermal water loss and improving hydration. It is widely used in moisturizers and barrier-repair formulations.
Ceramide AS
Skin-barrier lipid / emollient
Ceramide AS is a synthetic sphingolipid that mimics naturally occurring skin ceramides, helping restore and reinforce the stratum corneum barrier and reduce transepidermal water loss. It is commonly used in moisturizers and barrier-repair formulations.
Ceramide AP
Skin barrier lipid / moisturizer
Ceramide AP (ceramide 6-II) is a naturally occurring sphingolipid that helps restore and maintain the skin's barrier function and reduce transepidermal water loss. It is commonly used in moisturizers and barrier-repair formulations, often combined with other ceramides, cholesterol, and fatty acids.
Cholesterol
Skin barrier lipid / emollient
Cholesterol is a naturally occurring lipid found in the skin's stratum corneum that, alongside ceramides and fatty acids, helps maintain the skin barrier and prevent transepidermal water loss. In skincare formulations it functions as an emollient and barrier-repair agent that improves hydration and skin resilience.
2- Hexanediol
Humectant/preservative-booster
1,2-Hexanediol (commonly written 2-hexanediol) is a multifunctional diol used in skincare primarily as a humectant, solvent, and preservative-enhancing agent that improves the antimicrobial efficacy of formulations. It is generally well tolerated and considered a base/formulation ingredient rather than a treatment active.
Hydrogenated Lecithin
Emollient / Emulsifier
Hydrogenated lecithin is a phospholipid derived from lecithin through hydrogenation, used in skincare as an emulsifier, emollient, and skin-conditioning agent. It also helps stabilize formulations and form liposomes that can aid delivery of other ingredients.
Passiflora edulis fruit extract
Antioxidant/emollient
Passiflora Edulis (passion fruit) Fruit Extract is a plant-derived ingredient rich in vitamin C, polyphenols, carotenoids and fatty acids, used in skincare for antioxidant, soothing and skin-conditioning benefits. It is generally regarded as gentle and well tolerated in cosmetic formulations.
Butyrospermum Parkii (Shea) Butter
Emollient / occlusive moisturizer
Butyrospermum Parkii (Shea) Butter is a plant-derived fat extracted from the nuts of the African shea tree, rich in triglycerides and unsaponifiables. It is widely used in skincare to soften, smooth, and condition the skin while forming an occlusive barrier that reduces water loss.
Titanium dioxide Key active
UV filter / mineral sunscreen
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Decyl Glucoside
Surfactant/Cleanser
Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants.
Propylene Glycol
Humectant / solvent
Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active.
Xanthan Gum
Thickener/stabilizer
Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects.
Silica
Absorbent/texturizer
Silica is a mineral-derived ingredient (silicon dioxide) used in cosmetics to absorb oil and sebum, improve texture, and act as a bulking, anti-caking, or matting agent. It is generally inert and well tolerated on skin.
Ethylhexylglycerin
Preservative booster / skin-conditioning agent
Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations.
Carbomer
Thickener / gelling agent
Carbomer is a synthetic high-molecular-weight polymer of acrylic acid used to thicken, stabilize, and control the viscosity of gels, creams, and lotions. It functions as a formulation aid rather than a therapeutic active.
Butylated Hydroxytoluene
Antioxidant/preservative
Butylated Hydroxytoluene (BHT) is a synthetic antioxidant used in cosmetic formulations to prevent oxidation and rancidity of oils and fats, helping maintain product stability and shelf life. It functions as a stabilizer rather than a therapeutic active.
Disodium EDTA
Chelating agent
Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active.
Triethanolamine
pH adjuster / emulsifier
Triethanolamine is an organic compound used in cosmetic formulations primarily to adjust pH and to act as an emulsifying agent, helping to stabilize mixtures of oil and water. It is typically present in small concentrations as a formulation aid rather than a therapeutic active.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

PROMOTION · OUR OWN APP — THE FREE TOOLS WORK WITHOUT IT
◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →