Foxtale · 🇮🇳 India

SPF 70 Dewy Finish Sunscreen for Dry Skin

48 ingredients
Check the flags

Based on its listed ingredients, SPF 70 Dewy Finish Sunscreen for Dry Skin can feed fungal acne — details in the flags below.

What's in it

Below is every ingredient in SPF 70 Dewy Finish Sunscreen for Dry Skin explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
4 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: Low
Highest comedogenic rating 1/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Next: check the rest of your shelf

Your questions, answered from the ingredient list

Is SPF 70 Dewy Finish Sunscreen for Dry Skin fungal-acne safe?
Based on its listed ingredients, SPF 70 Dewy Finish Sunscreen for Dry Skin contains 2 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): Glyceryl monostearate, Polysorbate 60. If you are fungal-acne prone, you may want to avoid these.
Does SPF 70 Dewy Finish Sunscreen for Dry Skin contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of SPF 70 Dewy Finish Sunscreen for Dry Skin.
Will SPF 70 Dewy Finish Sunscreen for Dry Skin clog pores?
The highest comedogenic rating among its listed ingredients is 1/5 (low). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is SPF 70 Dewy Finish Sunscreen for Dry Skin safe to use in pregnancy?
None of its listed ingredients are flagged for pregnancy caution in our reference data — but always confirm your full routine with your own doctor.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

UV filter (broad-spectrum)

Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters.

UVA filter (sunscreen)

Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.

UVB sunscreen filter

Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF.

Cell-communicating / barrier-repair active

Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.

Antiseptic/antimicrobial

Octenidine HCl is a cationic surfactant antiseptic effective against bacteria, fungi, and some viruses, used in skin and wound disinfection and as a preservative in topical formulations. It binds to negatively charged microbial cell membranes, disrupting their integrity.

Antioxidant / soothing botanical extract

Rosmarinus Officinalis (rosemary) Leaf Extract is a plant-derived ingredient valued for its antioxidant and anti-inflammatory properties, largely attributed to compounds such as rosmarinic acid, carnosic acid, and carnosol. It is used in skincare to help protect against oxidative stress and may also serve as a natural preservative-boosting or astringent agent.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Irritation or sensitivity
Very rarePurified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water.
Transepidermal water loss aggravation in compromised skin
RareEvaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent.
Skin irritation
RareGenerally well tolerated; mild irritation possible in sensitive individuals.
Allergic contact dermatitis
RareUncommon sensitization reactions reported, sometimes linked to benzoate component.
Comedogenicity / breakouts
UncommonLow comedogenic potential but may contribute to clogged pores in acne-prone skin.
Contact urticaria
Very rareIsolated reports of hive-like reactions tied to benzoate moiety.
Mild skin irritation or stinging
CommonMore likely at higher concentrations or on compromised/sensitive skin
Irritant contact dermatitis
UncommonNon-allergic irritation, often dose-dependent
Worsening of pre-existing eczema or barrier-impaired skin
RarePenetration-enhancing effect may increase reactivity
Systemic toxicity from topical use
Very rareReported mainly with extensive application on broken skin, especially in infants or burn patients
Mild skin irritation
RareGenerally considered non-irritating; occasional mild reactions reported.
Contact allergy/sensitization
Very rareSilicones are low-allergenicity; documented allergic reactions are exceptional.
Eye irritation
RarePossible transient stinging if product enters the eyes.
Skin irritation or contact dermatitis
RareOccasional reports of mild irritation, generally considered well-tolerated.
Allergic contact dermatitis / sensitization
Very rareSensitization is uncommon; large molecular size limits skin penetration.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Aqua
Solvent / vehicle
Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery.
C12-15 alkyl benzoate
Emollient / texture enhancer
C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active.
Propylene glycol
Humectant / solvent
Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active.
Cyclopentasiloxane
Emollient/silicone
Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations.
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol Key active
UV filter (broad-spectrum)
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters.
Decyl Glucoside
Surfactant/Cleanser
Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants.
Xanthan Gum
Thickener/stabilizer
Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects.
Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active
UVA filter (sunscreen)
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Ethylhexyl triazone Key active
UVB sunscreen filter
Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF.
Dimethicone
Emollient/occlusive (silicone)
Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active.
Ceteareth-20
Emulsifier/surfactant
Ceteareth-20 is a polyethylene glycol (PEG) ether of cetearyl alcohol used primarily as a nonionic emulsifier and surfactant to stabilize oil-in-water formulations. It is a formulation base ingredient rather than a treatment active.
Isohexadecane
Emollient / solvent
Isohexadecane is a synthetic, branched-chain hydrocarbon (saturated isoparaffin) used as a lightweight emollient, solvent, and spreading agent in cosmetic formulations. It imparts a silky, non-greasy feel and helps disperse pigments and other ingredients.
Polysorbate 60
Emulsifier / surfactant
Polysorbate 60 is a nonionic surfactant and emulsifier derived from sorbitol and stearic acid, used to blend oil and water phases and stabilize emulsions in creams and lotions. It functions as a formulation aid rather than a therapeutic active.
Niacinamide Key active
Cell-communicating / barrier-repair active
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Phenoxyethanol
Preservative
Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment.
Ethylhexylglycerin
Preservative booster / skin-conditioning agent
Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations.
Octenidine HCl Key active
Antiseptic/antimicrobial
Octenidine HCl is a cationic surfactant antiseptic effective against bacteria, fungi, and some viruses, used in skin and wound disinfection and as a preservative in topical formulations. It binds to negatively charged microbial cell membranes, disrupting their integrity.
Glyceryl monostearate
Emulsifier / emollient
Glyceryl monostearate is a non-ionic emulsifier and thickening agent widely used in creams and lotions to blend oil and water phases and improve texture. It also provides mild skin-conditioning and emollient properties.
Glycerin
Humectant
Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations.
Polymethylsilsesquioxane
Texture enhancer / mattifying agent
Polymethylsilsesquioxane is a silicone-based spherical powder used in skincare and cosmetics to impart a smooth, soft-focus, mattifying feel and improve spreadability. It is a formulation/texture ingredient rather than a treatment active.
Rosmarinus Officinalis Leaf Extract Key active
Antioxidant / soothing botanical extract
Rosmarinus Officinalis (rosemary) Leaf Extract is a plant-derived ingredient valued for its antioxidant and anti-inflammatory properties, largely attributed to compounds such as rosmarinic acid, carnosic acid, and carnosol. It is used in skincare to help protect against oxidative stress and may also serve as a natural preservative-boosting or astringent agent.
Palmitoyl Tetrapeptide-7 Key active
Anti-aging signal peptide
Palmitoyl Tetrapeptide-7 is a palmitoylated synthetic peptide used in cosmetic formulations, primarily marketed to help reduce inflammatory signaling and support a more even, firmer skin appearance. It is commonly paired with other peptides such as Palmitoyl Tripeptide-1 in anti-aging products.
Pentylene Glycol
Humectant / solvent / preservative-booster
Pentylene glycol is a glycol used in cosmetics as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, helping reduce reliance on traditional preservatives. It improves skin hydration and aids the delivery and stability of other ingredients.
Chrysin Key active
Antioxidant / flavonoid
Chrysin is a naturally occurring flavonoid (found in honey, propolis, and certain plants) used in skincare for its antioxidant and anti-inflammatory properties. It is also studied for potentially reducing under-eye puffiness and inflammation.
D-Panthenol
Humectant / skin-conditioning agent
D-Panthenol (provitamin B5) is converted to pantothenic acid in the skin and acts as a humectant and emollient, helping retain moisture and support barrier repair. It is commonly included in skincare for its hydrating and soothing properties.
Tocopherol Key active
Antioxidant
Tocopherol (vitamin E) is a lipid-soluble antioxidant used in skincare to protect skin and formulations from oxidative damage caused by free radicals and UV exposure. It also functions as a skin-conditioning and emollient agent and can stabilize oils against rancidity.
Carbomer
Thickener / gelling agent
Carbomer is a synthetic high-molecular-weight polymer of acrylic acid used to thicken, stabilize, and control the viscosity of gels, creams, and lotions. It functions as a formulation aid rather than a therapeutic active.
Triethanolamine
pH adjuster / emulsifier
Triethanolamine is an organic compound used in cosmetic formulations primarily to adjust pH and to act as an emulsifying agent, helping to stabilize mixtures of oil and water. It is typically present in small concentrations as a formulation aid rather than a therapeutic active.
Disodium EDTA
Chelating agent
Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active.
C12-15 alkyl benzoate
Emollient / texture enhancer
C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active.
Propylene glycol
Humectant / solvent
Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active.
Cyclopentasiloxane
Emollient/silicone
Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations.
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol Key active
UV filter (broad-spectrum)
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters.
Decyl Glucoside
Surfactant/Cleanser
Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants.
Xanthan Gum
Thickener/stabilizer
Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects.
Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active
UVA filter (sunscreen)
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Ethylhexyl triazone Key active
UVB sunscreen filter
Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF.
Dimethicone
Emollient/occlusive (silicone)
Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active.
Ceteareth-20
Emulsifier/surfactant
Ceteareth-20 is a polyethylene glycol (PEG) ether of cetearyl alcohol used primarily as a nonionic emulsifier and surfactant to stabilize oil-in-water formulations. It is a formulation base ingredient rather than a treatment active.
Isohexadecane
Emollient / solvent
Isohexadecane is a synthetic, branched-chain hydrocarbon (saturated isoparaffin) used as a lightweight emollient, solvent, and spreading agent in cosmetic formulations. It imparts a silky, non-greasy feel and helps disperse pigments and other ingredients.
Polysorbate 60
Emulsifier / surfactant
Polysorbate 60 is a nonionic surfactant and emulsifier derived from sorbitol and stearic acid, used to blend oil and water phases and stabilize emulsions in creams and lotions. It functions as a formulation aid rather than a therapeutic active.
Niacinamide Key active
Cell-communicating / barrier-repair active
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Phenoxyethanol
Preservative
Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment.
Ethylhexylglycerin
Preservative booster / skin-conditioning agent
Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations.
Octenidine HCl Key active
Antiseptic/antimicrobial
Octenidine HCl is a cationic surfactant antiseptic effective against bacteria, fungi, and some viruses, used in skin and wound disinfection and as a preservative in topical formulations. It binds to negatively charged microbial cell membranes, disrupting their integrity.
Glyceryl monostearate
Emulsifier / emollient
Glyceryl monostearate is a non-ionic emulsifier and thickening agent widely used in creams and lotions to blend oil and water phases and improve texture. It also provides mild skin-conditioning and emollient properties.
Glycerin
Humectant
Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations.
Polymethy
Texture enhancer / mattifying agent
Polymethyl methacrylate (commonly abbreviated in formulations as 'Polymethyl' or PMMA) is a synthetic polymer used in cosmetics as a spherical filler that provides a smooth, soft-focus finish and helps absorb excess oil. It functions as a base/formulation ingredient rather than a biologically active treatment.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

PROMOTION · OUR OWN APP — THE FREE TOOLS WORK WITHOUT IT
◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →