Juicychemistry · 🇮🇳 India

Moisturising Mineral Sunscreen Fortified with Aloe + Argan

15 ingredients
What's in it

Below is every ingredient in Moisturising Mineral Sunscreen Fortified with Aloe + Argan explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
6 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: Low
Highest comedogenic rating 1/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Your questions, answered from the ingredient list

Is Moisturising Mineral Sunscreen Fortified with Aloe + Argan fungal-acne safe?
Based on its listed ingredients, Moisturising Mineral Sunscreen Fortified with Aloe + Argan contains 6 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): Argania Spinosa Kernel Oil, Cetearyl Olivate, Glyceryl Stearate, Prunus Dulcis (Almond) Oil, Sorbitan Olivate. If you are fungal-acne prone, you may want to avoid these.
Does Moisturising Mineral Sunscreen Fortified with Aloe + Argan contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of Moisturising Mineral Sunscreen Fortified with Aloe + Argan.
Will Moisturising Mineral Sunscreen Fortified with Aloe + Argan clog pores?
The highest comedogenic rating among its listed ingredients is 1/5 (low). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is Moisturising Mineral Sunscreen Fortified with Aloe + Argan safe to use in pregnancy?
None of its listed ingredients are flagged for pregnancy caution in our reference data — but always confirm your full routine with your own doctor.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

Titanium Dioxide
UV filter / mineral sunscreen

Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Allergic contact dermatitisUncommonSensitization can cause redness, itching, or rash, particularly in individuals allergic to plants in the Liliaceae family.
Mild stinging or burning on applicationUncommonTransient sensation, more likely on broken or sensitive skin.
Skin redness or irritationRareGenerally mild and self-limiting; may relate to preservatives or anthraquinone content in poorly processed extracts.
Delayed wound healingVery rareReported in isolated cases when applied to surgical or deep wounds.
White cast on skinCommonCosmetic effect, more pronounced on deeper skin tones and with non-micronized grades.
Skin dryness or mild irritationUncommonUsually related to the overall formulation rather than the ingredient itself.
Contact dermatitis or allergic reactionRareTitanium dioxide is a recognized low-sensitizing ingredient; reactions are infrequent.
Comedogenicity / clogged poresRareCan occur in some individuals depending on coating and formulation base.
Inhalation-related respiratory concernVery rareRelevant only to loose powder/spray forms via inhalation, not topical leave-on use.
Mild contact irritationRareOccasional redness or stinging, usually in sensitive or compromised skin.
Skin irritationRareMild redness or irritation occasionally reported, generally in sensitive individuals.
Contact allergy/sensitizationVery rareAllergic contact reactions are uncommon; the ingredient is generally regarded as low-risk.
Acneiform breakoutsRareAs a fatty acid derivative, may theoretically contribute to comedogenicity in acne-prone skin, though data are limited.
Mild skin irritationUncommonOccasional transient redness or stinging, more likely in sensitive or compromised skin.
Comedogenicity / pore cloggingUncommonMay contribute to clogged pores in acne-prone individuals depending on concentration and formulation.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Aloe Barbadensis Leaf Juice
Soothing/humectant
Aloe Barbadensis Leaf Juice is a plant-derived ingredient used in skincare for its hydrating, soothing, and emollient properties, often included to calm irritation and improve skin moisture. It functions primarily as a base/conditioning agent rather than a targeted treatment active.
Titanium Dioxide Key active
UV filter / mineral sunscreen
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Caprylic/Capric Triglyceride
Emollient / skin-conditioning agent
Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active.
Polyhydroxystearic Acid
Dispersant/emulsifier
Polyhydroxystearic acid is a fatty acid derivative used in cosmetic formulations primarily as a dispersing agent and emulsifier, helping to evenly distribute pigments (such as titanium dioxide and zinc oxide in sunscreens) and stabilize oil-based or water-in-oil systems. It improves texture, spreadability, and uniformity rather than providing a direct biological skin benefit.
Stearic Acid
Emulsifier / thickener
Stearic acid is a saturated long-chain fatty acid widely used in cosmetics as an emulsifier, thickening agent, and emollient to stabilize creams and lotions. It is generally considered a base/formulation ingredient rather than a therapeutic active.
Alumina
Abrasive/opacifying agent
Alumina (aluminum oxide) is a fine, hard mineral powder used in skincare and cosmetics primarily as a physical exfoliant in microdermabrasion products and as a bulking, opacifying, or anticaking agent in formulations. It is largely inert and not absorbed through intact skin.
Prunus Dulcis (Almond) Oil
Emollient / skin conditioning oil
Prunus Dulcis (Almond) Oil is a sweet almond–derived plant oil rich in oleic and linoleic fatty acids, used to soften, smooth, and moisturize skin by reducing transepidermal water loss. It serves primarily as an occlusive and conditioning base ingredient in creams, lotions, and massage oils.
Argania Spinosa Kernel Oil
Emollient / skin-conditioning oil
Argania Spinosa Kernel Oil (argan oil) is a plant-derived emollient rich in oleic and linoleic fatty acids, tocopherols, and polyphenols, used to soften skin, support the skin barrier, and provide antioxidant activity. It functions primarily as a moisturizing and conditioning agent in cosmetic formulations.
Cetearyl Olivate
Emulsifier / emollient
Cetearyl Olivate is an olive oil-derived emulsifier and emollient, typically used with Sorbitan Olivate, that helps blend oil and water phases while conditioning and softening the skin. It supports the skin barrier and gives formulations a light, non-greasy feel.
Sorbitan Olivate
Emulsifier
Sorbitan Olivate is an olive-derived ester of sorbitol and olive oil fatty acids used as a non-ionic emulsifier and emollient. It is often paired with Cetearyl Olivate (as Olivem 1000) to stabilize oil-in-water emulsions and impart a soft skin feel.
Glyceryl Stearate
Emulsifier/emollient
Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active.
Cetearyl Alcohol
Emollient/emulsifier
Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions.
Heptyl Undecylenate
Emollient / skin-conditioning agent
Heptyl undecylenate is a lightweight ester derived from undecylenic acid and heptyl alcohol, used in cosmetic formulations as an emollient and dry-feel skin-conditioning agent. It imparts a smooth, non-greasy texture and can serve as a natural-derived alternative to silicones.
Squalane
Emollient / occlusive moisturizer
Squalane is a saturated, stable hydrocarbon derived from squalene (sourced from plants like olives or sugarcane, or shark liver) used as a lightweight emollient that softens skin and reinforces the skin barrier by reducing transepidermal water loss. It is well tolerated, non-comedogenic for most users, and serves as a base or carrier ingredient rather than a therapeutic active.
Benzyl
Fragrance/preservative component
Benzyl (commonly seen as benzyl alcohol, benzyl benzoate, or benzyl salicylate) is a group of aromatic compounds used in skincare primarily as fragrance ingredients, solvents, and preservatives. They help stabilize formulations and impart scent rather than provide a therapeutic skin benefit.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →