Below is every ingredient in Anti-Blemish Gel with Indian Madder and Fumitory 15 g explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Salicylic acid is a lipid-soluble beta-hydroxy acid that exfoliates the skin surface and penetrates sebaceous pores to loosen and dissolve keratin and debris. It is widely used to treat acne, blackheads, and conditions involving thickened or scaly skin.
Zinc PCA is the zinc salt of pyrrolidone carboxylic acid used in skincare to help control excess sebum, support antimicrobial activity, and provide mild hydration. It is commonly included in products targeting oily and acne-prone skin.
Bisabolol is a naturally derived (typically from chamomile) or synthetic terpene alcohol used in skincare for its anti-inflammatory, soothing, and skin-conditioning properties. It is also reported to enhance penetration of other ingredients and offers mild antimicrobial activity.
Dipotassium glycyrrhizate is a water-soluble salt derived from licorice root (glycyrrhizic acid) used in skincare for its anti-inflammatory, soothing, and antioxidant properties. It is commonly added to formulations to calm irritation, redness, and sensitivity.
Citrus Limon (lemon) fruit extract is derived from lemon and is used in skincare for its astringent, brightening, and antioxidant properties, largely attributed to its vitamin C and citric acid content. It is commonly included for toning and mild exfoliating effects.
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin dryness or barrier disruption with excessive contact | Uncommon | Frequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss. |
| Irritation from impurities or hard water minerals | Rare | Reactions are attributed to contaminants, chlorine, or mineral content rather than water itself. |
| Skin dryness | Common | High concentrations can strip natural oils and reduce skin hydration. |
| Irritation or stinging | Common | Especially on compromised, sensitive, or freshly exfoliated skin. |
| Disruption of skin barrier | Uncommon | Repeated exposure may impair barrier function with frequent use. |
| Contact dermatitis | Rare | Irritant or allergic reactions reported in susceptible individuals. |
| Allergic contact dermatitis to ethanol itself | Very rare | True ethanol allergy is uncommon and documented in isolated cases. |
| Mild transient stinging or irritation | Uncommon | More likely on broken or compromised skin or at high concentrations. |
| Allergic contact dermatitis | Rare | Documented in patch-test studies but considered a relatively weak sensitizer. |
| Redness or itching | Rare | Typically resolves after discontinuation. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Mild skin irritation or redness | Rare | Generally considered non-irritating; occasional mild reactions reported. |
| Clogged pores / comedogenic-related breakouts | Uncommon | Often anecdotal; dimethicone is largely regarded as non-comedogenic but may trap debris if skin is not cleansed well. |
| Eye irritation on accidental contact | Rare | Transient stinging or discomfort if product enters the eyes. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| Alcohol Denat Solvent/penetration enhancer | Alcohol Denat (denatured ethanol) is a volatile solvent used in skincare to dissolve other ingredients, improve product spreadability and absorption, and create a quick-drying, lightweight feel. It is a formulation aid rather than a therapeutic active. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Cyclopentasiloxane Emollient/silicone | Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations. |
| Polyacrylamide Thickener/film-former | Polyacrylamide is a synthetic polymer used in cosmetics primarily as a thickening agent, film former, and stabilizer that improves texture and viscosity of formulations. It is considered a base/formulation ingredient rather than a treatment active. |
| PEG-8 Humectant / solvent | PEG-8 (polyethylene glycol 8) is a water-soluble polyether used in cosmetics as a humectant, solvent, and emollient that helps retain moisture and stabilize formulations. It is generally considered a base/formulation ingredient rather than a therapeutic active. |
| Salicylic Acid Key active Beta-hydroxy acid (BHA) exfoliant / keratolytic | Salicylic acid is a lipid-soluble beta-hydroxy acid that exfoliates the skin surface and penetrates sebaceous pores to loosen and dissolve keratin and debris. It is widely used to treat acne, blackheads, and conditions involving thickened or scaly skin. |
| Aloe Barbadensis Leaf Juice Soothing/humectant | Aloe Barbadensis Leaf Juice is a plant-derived ingredient used in skincare for its hydrating, soothing, and emollient properties, often included to calm irritation and improve skin moisture. It functions primarily as a base/conditioning agent rather than a targeted treatment active. |
| Triethanolamine pH adjuster / emulsifier | Triethanolamine is an organic compound used in cosmetic formulations primarily to adjust pH and to act as an emulsifying agent, helping to stabilize mixtures of oil and water. It is typically present in small concentrations as a formulation aid rather than a therapeutic active. |
| Acrylates/C10-30 Alkyl Acrylate Crosspolymer Rheology modifier / emulsion stabilizer | Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic crosslinked acrylic polymer used to thicken, gel, and stabilize emulsions in skincare and cosmetic formulations. It helps suspend ingredients and provides a smooth, consistent texture without acting as a treatment active. |
| Polysilicone-11 Film-former / texturizer | Polysilicone-11 is a silicone-based crosslinked polymer used in cosmetics to form a smooth, flexible film on the skin, providing mattifying, blurring, and texture-improving effects. It is commonly found in primers, foundations, and sunscreens as a formulation ingredient rather than a treatment active. |
| C13-14 Isoparaffin Emollient/thickener | C13-14 Isoparaffin is a synthetic hydrocarbon used in skincare primarily as an emollient and as a thickening or gelling agent, often paired with polyacrylamide-based systems to stabilize emulsions. It helps improve spreadability and texture but provides no active treatment benefit. |
| Zinc Pca Key active Sebum-regulating, antimicrobial | Zinc PCA is the zinc salt of pyrrolidone carboxylic acid used in skincare to help control excess sebum, support antimicrobial activity, and provide mild hydration. It is commonly included in products targeting oily and acne-prone skin. |
| Bisabolol Key active Soothing/anti-inflammatory agent | Bisabolol is a naturally derived (typically from chamomile) or synthetic terpene alcohol used in skincare for its anti-inflammatory, soothing, and skin-conditioning properties. It is also reported to enhance penetration of other ingredients and offers mild antimicrobial activity. |
| Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer Emulsifier/stabilizer (thickener) | Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer is a synthetic acrylate-based polymer used to thicken, stabilize, and emulsify cosmetic formulations, creating smooth gel and cream textures. It is widely employed as a rheology modifier and is not a therapeutic active. |
| Isohexadecane Emollient / solvent | Isohexadecane is a synthetic, branched-chain hydrocarbon (saturated isoparaffin) used as a lightweight emollient, solvent, and spreading agent in cosmetic formulations. It imparts a silky, non-greasy feel and helps disperse pigments and other ingredients. |
| Isopropyl Alcohol Solvent/antimicrobial | Isopropyl alcohol is a clear, volatile solvent used in skincare and cosmetic formulations as a solvent, antiseptic, and to aid rapid drying. It dissolves oils and other ingredients and is commonly found in toners, astringents, and disinfecting products. |
| Alcohol Solvent / penetration enhancer | Alcohol (typically ethanol or denatured alcohol) is used in skincare as a solvent, antimicrobial agent, and to improve product spreadability and rapid drying. It also enhances penetration of other ingredients and gives a lightweight feel to formulations. |
| Benzyl Alcohol Preservative / solvent | Benzyl alcohol is an aromatic alcohol used primarily as a preservative and solvent in cosmetic formulations, and it also provides mild fragrance and viscosity-reducing properties. It is approved for use as a preservative at concentrations up to about 1% in leave-on and rinse-off products. |
| Dipotassium Glycyrrhizate Key active Anti-inflammatory/soothing agent | Dipotassium glycyrrhizate is a water-soluble salt derived from licorice root (glycyrrhizic acid) used in skincare for its anti-inflammatory, soothing, and antioxidant properties. It is commonly added to formulations to calm irritation, redness, and sensitivity. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Cucumis Sativus Fruit Extract Soothing/hydrating botanical extract | Cucumis Sativus (cucumber) fruit extract is used in skincare for its hydrating, soothing, and mild antioxidant properties. It is commonly added to formulations to provide a cooling, calming sensation and to support skin moisture. |
| Citrus Limon Fruit Extract Key active Antioxidant/astringent | Citrus Limon (lemon) fruit extract is derived from lemon and is used in skincare for its astringent, brightening, and antioxidant properties, largely attributed to its vitamin C and citric acid content. It is commonly included for toning and mild exfoliating effects. |
| Sodium Citrate pH adjuster / chelating agent | Sodium citrate is the sodium salt of citric acid used in skincare primarily as a buffering agent to stabilize formulation pH and as a chelator that binds metal ions to improve product stability. It is a base/formulation ingredient rather than a therapeutic active. |
| Laureth-7 Emulsifier/surfactant | Laureth-7 is a polyethylene glycol ether of lauryl alcohol used in cosmetics as a nonionic surfactant, emulsifier, and solubilizer to stabilize formulations and disperse oils. It functions as a formulation aid rather than a therapeutic active. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Salix Alba Bark Extract Key active Natural exfoliant / anti-inflammatory | Salix Alba (White Willow) Bark Extract is a botanical source of salicin, which can be converted to salicylic acid, offering mild exfoliating, anti-inflammatory, and astringent properties. It is commonly used in formulations targeting acne-prone, oily, or congested skin as a gentler alternative to synthetic salicylic acid. |
| Sorbitol Humectant | Sorbitol is a sugar alcohol (polyol) used in skincare as a humectant and texture enhancer, drawing moisture into the skin and improving product spreadability. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Hamamelis Virginiana Bark/Twig Extract Key active Astringent/antioxidant | Hamamelis Virginiana (witch hazel) bark/twig extract is a plant-derived ingredient rich in tannins and polyphenols, used in skincare for its astringent, soothing, and antioxidant properties. It is commonly included in toners and formulations aimed at oily or irritated skin. |
| Polysorbate 60 Emulsifier / surfactant | Polysorbate 60 is a nonionic surfactant and emulsifier derived from sorbitol and stearic acid, used to blend oil and water phases and stabilize emulsions in creams and lotions. It functions as a formulation aid rather than a therapeutic active. |
| Ammonium Polyacryloyldimethyl Taurate Thickener/stabilizer | Ammonium Polyacryloyldimethyl Taurate is a synthetic anionic polymer used as a gelling agent, emulsion stabilizer, and viscosity modifier in cosmetic formulations. It helps create smooth, stable textures in creams, gels, and serums without requiring high heat or complex emulsification. |
| Malpighia Emarginata Fruit Extract Key active Antioxidant / Vitamin C source | Malpighia Emarginata (acerola cherry) Fruit Extract is a botanical ingredient rich in vitamin C (ascorbic acid) and polyphenols, used in skincare for its antioxidant and brightening properties. It helps neutralize free radicals and may support collagen synthesis and even skin tone. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Chamomilla Recutita Flower Extract Key active Soothing/anti-inflammatory botanical extract | Chamomilla Recutita (German chamomile) flower extract is a plant-derived ingredient used in skincare for its soothing, anti-inflammatory, and antioxidant properties, attributed to compounds such as bisabolol, chamazulene, and flavonoids. It is commonly added to formulations intended to calm sensitive, irritated, or reddened skin. |
| Polysorbate 80 Emulsifier / surfactant / solubilizer | Polysorbate 80 is a nonionic surfactant derived from sorbitol and oleic acid, used to emulsify oil and water phases and solubilize fragrances and oils in cosmetic and pharmaceutical formulations. It functions as a formulation aid rather than a therapeutic active. |
| Sorbitan Isostearate Emulsifier / surfactant | Sorbitan isostearate is a sorbitan ester of isostearic acid used as a nonionic emulsifier and stabilizer in oil-in-water and water-in-oil cosmetic formulations. It helps blend oil and water phases and improves texture and spreadability. |
| Spiraea Ulmaria Extract Key active Soothing/astringent botanical extract | Spiraea Ulmaria (meadowsweet) extract is a plant-derived ingredient rich in salicylates, tannins, and flavonoids, used in skincare for its astringent, soothing, and mild antimicrobial properties. It is often included to help tone skin and support oily or blemish-prone skin formulations. |
| Polysorbate 20 Emulsifier / solubilizer | Polysorbate 20 is a nonionic surfactant derived from sorbitol and lauric acid, used in skincare to solubilize fragrances and essential oils and to stabilize oil-in-water emulsions. It functions primarily as a formulation aid rather than a treatment active. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Zingiber Officinale Root Extract Key active Antioxidant / anti-inflammatory botanical | Zingiber Officinale (ginger) Root Extract is a plant-derived ingredient rich in gingerols and shogaols, used in skincare for its antioxidant and anti-inflammatory properties. It is often included to help soothe skin and protect against oxidative stress. |
| Ascorbic Acid Key active Antioxidant / brightening active | Ascorbic acid (vitamin C) is a water-soluble antioxidant used in skincare to neutralize free radicals, inhibit melanin synthesis, and support collagen production. It is valued for brightening, evening skin tone, and protecting against photodamage when used alongside sunscreen. |
| Potassium Sorbate Preservative | Potassium sorbate is the potassium salt of sorbic acid, used as a mild preservative to inhibit mold, yeast, and some bacterial growth in cosmetic formulations. It is most effective at acidic pH and is often combined with other preservatives for broad-spectrum protection. |
| Camellia Sinensis Leaf Extract Key active Antioxidant | Camellia Sinensis Leaf Extract (green tea extract) is derived from the leaves of the tea plant and is rich in polyphenols, particularly catechins like EGCG. It is used in skincare for its antioxidant, anti-inflammatory, and soothing properties. |
| Ethylparaben Preservative | Ethylparaben is a paraben-class antimicrobial preservative used to inhibit the growth of bacteria, yeast, and mold in cosmetic and skincare formulations. It is valued for its broad-spectrum efficacy and stability across a wide pH range. |
| Methylparaben Preservative | Methylparaben is a paraben-class antimicrobial preservative widely used in cosmetics and skincare to prevent microbial growth and extend product shelf life. It is effective primarily against fungi and yeasts, often combined with other parabens for broader protection. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Sodium Benzoate Preservative | Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5. |
| Citric Acid pH adjuster / AHA exfoliant | Citric acid is an alpha-hydroxy acid derived from citrus fruits, used primarily to adjust and buffer formulation pH and as a chelating agent, and at higher concentrations as a mild chemical exfoliant. It can promote surface cell turnover and is sometimes included in antioxidant or brightening products. |
| Propylparaben Preservative | Propylparaben is a paraben-class antimicrobial preservative used to inhibit the growth of bacteria, mold, and yeast in cosmetic and personal care formulations. It is typically used at low concentrations alongside other parabens for broad-spectrum preservation. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.