Below is every ingredient in Beetroot Hydraful Body Lotion with Beetroot & Hyaluronic Acid & for Natural Pink Glow - 400 ml explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Urea is a naturally occurring component of the skin's natural moisturizing factor that hydrates by attracting and retaining water; at higher concentrations it also softens and exfoliates thickened or scaly skin. It is widely used to treat dry skin conditions such as xerosis, ichthyosis, and hyperkeratosis.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Hyaluronic acid is a glycosaminoglycan that attracts and binds water to the skin, helping to maintain hydration and improve the appearance of plumpness and smoothness. It is widely used in moisturizers and serums and is generally well tolerated across skin types.
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Mild contact irritation | Rare | Occasional redness or stinging, usually in sensitive or compromised skin. |
| Allergic contact dermatitis | Very rare | Isolated case reports; considered a low-sensitizing ingredient. |
| Comedogenicity / clogged pores | Rare | Generally low comedogenic potential, but acne-prone individuals may occasionally react. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Contact dermatitis / skin irritation | Rare | Occasional mild irritation reported, typically in sensitive individuals. |
| Comedogenicity / pore clogging | Uncommon | May contribute to breakouts in acne-prone skin due to its occlusive, waxy nature. |
| Mild skin irritation | Rare | Generally well tolerated; occasional transient redness or stinging in sensitive individuals. |
| Skin irritation | Rare | Mild irritation or redness possible, generally in sensitive or compromised skin. |
| Cross-reactivity with other fatty alcohols | Rare | Individuals sensitized to cetyl or stearyl alcohol may react to the blend. |
| Contact dermatitis (irritant or allergic) | Rare | Reported in patch-test and occupational settings; PEG/ceteareth emulsifiers are recognized sensitizers in some individuals. |
| Enhanced penetration of other ingredients | Uncommon | As a surfactant it may increase skin permeability, indirectly affecting tolerance of co-formulated actives. |
| Concern over ethylene oxide/1,4-dioxane impurities | Very rare | Trace process contaminants are possible; purification and regulatory limits minimize this risk. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Cetyl Palmitate Emollient / Thickener | Cetyl palmitate is a waxy ester of cetyl alcohol and palmitic acid used as an emollient, thickening agent, and emulsion stabilizer in creams, lotions, and cosmetics. It softens skin and helps provide a smooth texture and consistent product structure. |
| Glyceryl Stearate Emulsifier/emollient | Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active. |
| Cetearyl Alcohol Emollient/emulsifier | Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions. |
| Stearic Acid Emulsifier / thickener | Stearic acid is a saturated long-chain fatty acid widely used in cosmetics as an emulsifier, thickening agent, and emollient to stabilize creams and lotions. It is generally considered a base/formulation ingredient rather than a therapeutic active. |
| Ceteareth-20 Emulsifier/surfactant | Ceteareth-20 is a polyethylene glycol (PEG) ether of cetearyl alcohol used primarily as a nonionic emulsifier and surfactant to stabilize oil-in-water formulations. It is a formulation base ingredient rather than a treatment active. |
| Butyrospermum Parkii (Shea) Butter Emollient / occlusive moisturizer | Butyrospermum Parkii (Shea) Butter is a plant-derived fat extracted from the nuts of the African shea tree, rich in triglycerides and unsaponifiables. It is widely used in skincare to soften, smooth, and condition the skin while forming an occlusive barrier that reduces water loss. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Sodium Chloride Thickener / viscosity adjuster | Sodium chloride (table salt) is commonly used in cosmetics as a thickening and viscosity-control agent, particularly in surfactant-based cleansers, and also acts as a mild abrasive in scrubs. It is generally well tolerated and considered a formulation ingredient rather than a treatment active. |
| Sodium Lactate Humectant / NMF component | Sodium lactate is the sodium salt of lactic acid and a key component of skin's natural moisturizing factor (NMF), used to hydrate the skin and buffer formulation pH. It also has mild exfoliating and humectant properties that help maintain skin moisture and barrier function. |
| Trehalose Humectant / moisturizer | Trehalose is a naturally occurring disaccharide used in skincare as a humectant and protective agent, helping retain moisture and stabilize cell membranes and proteins against dehydration and oxidative stress. It is well tolerated and commonly used to support skin barrier hydration. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Glucose Humectant/skin-conditioning agent | Glucose is a simple sugar used in skincare primarily as a humectant and skin-conditioning ingredient, helping to attract and retain moisture in the skin. It can also serve as a substrate in formulations and contributes to the skin's natural moisturizing factors. |
| Pentylene Glycol Humectant / solvent / preservative-booster | Pentylene glycol is a glycol used in cosmetics as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, helping reduce reliance on traditional preservatives. It improves skin hydration and aids the delivery and stability of other ingredients. |
| Fructose Humectant | Fructose is a simple monosaccharide sugar used in skincare primarily as a humectant that attracts and binds water to help maintain skin hydration. It is generally considered a supporting/base ingredient rather than a therapeutic active. |
| Urea Key active Humectant / keratolytic | Urea is a naturally occurring component of the skin's natural moisturizing factor that hydrates by attracting and retaining water; at higher concentrations it also softens and exfoliates thickened or scaly skin. It is widely used to treat dry skin conditions such as xerosis, ichthyosis, and hyperkeratosis. |
| Citric Acid pH adjuster / AHA exfoliant | Citric acid is an alpha-hydroxy acid derived from citrus fruits, used primarily to adjust and buffer formulation pH and as a chelating agent, and at higher concentrations as a mild chemical exfoliant. It can promote surface cell turnover and is sometimes included in antioxidant or brightening products. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Maltose Humectant / skin-conditioning agent | Maltose is a disaccharide sugar used in skincare primarily as a humectant and skin-conditioning agent, helping to attract and retain moisture in the stratum corneum. It is generally considered a low-risk, well-tolerated formulation ingredient rather than a therapeutic active. |
| Sodium PCA Humectant | Sodium PCA (sodium pyrrolidone carboxylic acid) is the sodium salt of pyroglutamic acid and a component of the skin's natural moisturizing factor (NMF). It is widely used in cosmetics as a water-binding humectant to hydrate and soften the skin. |
| IFRA Certified Fragrance Fragrance/masking agent | IFRA Certified Fragrance refers to a fragrance blend formulated in compliance with International Fragrance Association (IFRA) safety standards, used to impart scent or mask base odors in cosmetic products. It is a sensory/formulation additive rather than a functional skincare active. |
| Laminaria Digitata Extract Conditioning/antioxidant | Laminaria Digitata Extract is derived from brown seaweed and is used in skincare for its mineral, polysaccharide, and antioxidant content, providing skin-conditioning, hydrating, and soothing benefits. It is commonly included for its purported moisturizing and protective properties. |
| Hydrogenated Lecithin Emollient / Emulsifier | Hydrogenated lecithin is a phospholipid derived from lecithin through hydrogenation, used in skincare as an emulsifier, emollient, and skin-conditioning agent. It also helps stabilize formulations and form liposomes that can aid delivery of other ingredients. |
| Cetyl-PG Hydroxyethyl Palmitamide Skin-conditioning emollient / pseudo-ceramide | Cetyl-PG Hydroxyethyl Palmitamide is a synthetic pseudo-ceramide used to mimic natural skin ceramides, helping to support the skin barrier and reduce transepidermal water loss. It functions as an emollient and moisturizing agent commonly found in barrier-repair and dry-skin formulations. |
| Ceramide EOP Skin barrier lipid | Ceramide EOP is a long-chain omega-hydroxy ceramide that helps form and maintain the skin's lipid barrier, supporting moisture retention and reducing transepidermal water loss. It is commonly used in moisturizers and barrier-repair formulations. |
| Ceramide NS Skin-barrier lipid / emollient | Ceramide NS (formerly Ceramide 2) is a naturally occurring sphingolipid that helps restore and maintain the skin's lipid barrier, reducing transepidermal water loss and improving hydration. It is widely used in moisturizers and barrier-repair formulations. |
| Ceramide NG Skin-barrier lipid / moisturizer | Ceramide NG (formerly ceramide 2) is a synthetic skin-identical lipid that helps restore and reinforce the stratum corneum barrier, reducing transepidermal water loss and improving hydration. It is widely used in moisturizers and barrier-repair formulations. |
| Ceramide NP Skin-barrier replenishing lipid / emollient | Ceramide NP (formerly ceramide 3) is a naturally occurring sphingolipid that helps restore and maintain the skin's lipid barrier, reducing transepidermal water loss and improving hydration. It is widely used in moisturizers and barrier-repair formulations. |
| Ceramide AS Skin-barrier lipid / emollient | Ceramide AS is a synthetic sphingolipid that mimics naturally occurring skin ceramides, helping restore and reinforce the stratum corneum barrier and reduce transepidermal water loss. It is commonly used in moisturizers and barrier-repair formulations. |
| Ceramide AP Skin barrier lipid / moisturizer | Ceramide AP (ceramide 6-II) is a naturally occurring sphingolipid that helps restore and maintain the skin's barrier function and reduce transepidermal water loss. It is commonly used in moisturizers and barrier-repair formulations, often combined with other ceramides, cholesterol, and fatty acids. |
| 2-Hexanediol Humectant/preservative-booster | 1,2-Hexanediol (commonly written 2-hexanediol) is a multifunctional diol used in skincare primarily as a humectant, solvent, and preservative-enhancing agent that improves the antimicrobial efficacy of formulations. It is generally well tolerated and considered a base/formulation ingredient rather than a treatment active. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Hyaluronic Acid Key active Humectant / hydrating agent | Hyaluronic acid is a glycosaminoglycan that attracts and binds water to the skin, helping to maintain hydration and improve the appearance of plumpness and smoothness. It is widely used in moisturizers and serums and is generally well tolerated across skin types. |
| Sodium Benzoate Preservative | Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5. |
| Carbomer Thickener / gelling agent | Carbomer is a synthetic high-molecular-weight polymer of acrylic acid used to thicken, stabilize, and control the viscosity of gels, creams, and lotions. It functions as a formulation aid rather than a therapeutic active. |
| Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer Thickener / stabilizer | Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer is a synthetic acrylic-based polymer used as a rheology modifier, thickening agent, and emulsion stabilizer in skincare and cosmetic formulations. It helps create smooth, stable gels and creams without contributing active treatment benefits to the skin. |
| C15-19 Alkane Emollient / skin-conditioning agent | C15-19 Alkane is a lightweight, plant-derived (often sugarcane-based) liquid hydrocarbon used as a silicone alternative emollient and solvent in cosmetic formulations. It provides slip, spreadability, and a smooth, non-greasy skin feel without adding active treatment benefits. |
| Lauryl Glucoside Surfactant/cleansing agent | Lauryl Glucoside is a non-ionic surfactant derived from coconut/palm fatty alcohols and glucose, used as a mild cleansing and foaming agent in skin and hair care products. It is considered gentle and biodegradable, often replacing harsher anionic surfactants. |
| Beta Vulgaris (Beet) Root Extract Skin conditioning / humectant | Beta Vulgaris (Beet) Root Extract is a plant-derived ingredient used in skincare for its humectant, antioxidant, and skin-conditioning properties, often providing soothing and hydrating benefits. It also contains betaine and natural pigments (betalains) that may help maintain moisture balance. |
| Cocos Nucifera (Coconut) Oil Emollient/occlusive | Cocos Nucifera (Coconut) Oil is a plant-derived lipid used as an emollient and occlusive agent to soften skin and reduce transepidermal water loss. It is rich in saturated fatty acids, predominantly lauric acid. |
| Sodium Gluconate Chelating agent / skin-conditioning | Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.