Based on its listed ingredients, Retinol Face Mask with Retinol and Bakuchi for Fine Lines & Wrinkles - 100 g can feed fungal acne; has a pregnancy-caution ingredient — details in the flags below.
Below is every ingredient in Retinol Face Mask with Retinol and Bakuchi for Fine Lines & Wrinkles - 100 g explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Glycolic acid is an alpha-hydroxy acid derived from sugar cane that exfoliates by loosening bonds between dead skin cells on the surface, promoting cell turnover and improving texture, tone, and fine lines. It is one of the smallest AHAs, allowing relatively deep penetration into the skin.
Retinol is a vitamin A derivative that converts to retinoic acid in the skin, promoting cell turnover and stimulating collagen synthesis. It is widely used to address fine lines, photoaging, and acne.
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Bisabolol is a naturally derived (typically from chamomile) or synthetic terpene alcohol used in skincare for its anti-inflammatory, soothing, and skin-conditioning properties. It is also reported to enhance penetration of other ingredients and offers mild antimicrobial activity.
Mulberry extract, derived from the Morus plant, is used in skincare for its antioxidant properties and ability to inhibit tyrosinase, helping to reduce hyperpigmentation and even skin tone. It also contains flavonoids and arbutin-like compounds that may protect against oxidative stress.
Chamomile extract is a plant-derived ingredient (commonly from Matricaria chamomilla) used in skincare for its anti-inflammatory, antioxidant, and skin-soothing properties, largely attributed to compounds like bisabolol, chamazulene, and flavonoids. It is often included to calm irritation, redness, and sensitive skin.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
Skin irritation | Rare | Mild localized irritation possible, generally in sensitive individuals. |
Allergic contact dermatitis | Rare | Sensitization is uncommon but can occur, often linked to residual isocyanate monomers. |
Eye irritation | Rare | May occur with accidental contact in liquid formulations. |
Skin dryness or tightness | Common | Due to its oil-absorbing action, especially on dry or sensitive skin. |
Irritation or redness | Uncommon | May occur with prolonged contact or overuse. |
Respiratory irritation from powder | Rare | Relevant mainly when handling dry clay powder; inhalation should be avoided. |
Mild contact irritation | Rare | Occasional redness or stinging, usually in sensitive or compromised skin. |
Comedogenicity / clogged pores | Rare | Generally low comedogenic potential, but acne-prone individuals may occasionally react. |
Contact allergy/sensitization | Very rare | Allergic contact reactions are uncommon; the ingredient is generally regarded as low-risk. |
Acneiform breakouts | Rare | As a fatty acid derivative, may theoretically contribute to comedogenicity in acne-prone skin, though data are limited. |
Skin irritation or stinging | Uncommon | More likely on broken or highly sensitive skin. |
Contact urticaria (hives) | Rare | Immediate hypersensitivity reaction reported in isolated cases. |
Delayed wound healing | Very rare | Reported in some surgical wound contexts with topical application. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Kaolin (Purple Brazillian Clay) Formulation / support | |
| Polyurethane 35 Film former | Polyurethane-35 is a synthetic polymeric film-forming agent used in cosmetic formulations, particularly nail products and some skincare and color cosmetics, to create a flexible, water-resistant, and durable film on the surface. It helps improve wear, gloss, and the longevity of the applied product. |
| Bentonite Absorbent clay / mask base | Bentonite is a montmorillonite-rich absorbent clay used in masks and cleansers to adsorb excess sebum, oils, and impurities from the skin. It also acts as a thickening and stabilizing agent in cosmetic formulations. |
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Polyhydroxystearic Acid Dispersant/emulsifier | Polyhydroxystearic acid is a fatty acid derivative used in cosmetic formulations primarily as a dispersing agent and emulsifier, helping to evenly distribute pigments (such as titanium dioxide and zinc oxide in sunscreens) and stabilize oil-based or water-in-oil systems. It improves texture, spreadability, and uniformity rather than providing a direct biological skin benefit. |
| Aloe Vera Extract Soothing humectant/emollient | Aloe vera extract is a plant-derived ingredient valued for its hydrating, soothing, and mild anti-inflammatory properties in skincare. It is commonly used to calm irritation and support skin barrier comfort. |
| Kokum Butter Emollient / occlusive moisturizer | Kokum butter is a hard, non-greasy plant fat extracted from the seeds of Garcinia indica, rich in stearic and oleic acids. It is used in skincare as an emollient and skin-conditioning agent to soften skin and reinforce the skin barrier. |
| Propylene Glycol Dibenzoate Emollient/solvent | Propylene Glycol Dibenzoate is an ester used in cosmetic formulations primarily as an emollient, solvent, and plasticizing agent that imparts a smooth skin feel and aids in dissolving other ingredients. It functions as a formulation/base ingredient rather than a therapeutic active. |
| Trehalose Humectant / moisturizer | Trehalose is a naturally occurring disaccharide used in skincare as a humectant and protective agent, helping retain moisture and stabilize cell membranes and proteins against dehydration and oxidative stress. It is well tolerated and commonly used to support skin barrier hydration. |
| Glycolic Acid Key active Chemical exfoliant (AHA) | Glycolic acid is an alpha-hydroxy acid derived from sugar cane that exfoliates by loosening bonds between dead skin cells on the surface, promoting cell turnover and improving texture, tone, and fine lines. It is one of the smallest AHAs, allowing relatively deep penetration into the skin. |
| Glyceryl Stearate Citrate Emulsifier / co-emulsifier | Glyceryl Stearate Citrate is a plant-derived ester of glycerin, stearic acid, and citric acid used to create stable oil-in-water emulsions. It functions as a non-ionic emulsifier and skin-conditioning agent in creams and lotions. |
| Glyceryl Monostearate Emulsifier / emollient | Glyceryl monostearate is a non-ionic emulsifier and thickening agent widely used in creams and lotions to blend oil and water phases and improve texture. It also provides mild skin-conditioning and emollient properties. |
| Sodium Lauroyl Sarcosinate Surfactant / cleansing agent | Sodium Lauroyl Sarcosinate is an amino acid-derived anionic surfactant used in cleansers, shampoos and toothpastes to provide gentle foaming and cleansing. It is generally considered milder than traditional sulfate surfactants. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Pentaerythrityl Tetra-di-t-butyl Hydroxyhydrocinnamate Antioxidant/stabilizer | Pentaerythrityl Tetra-di-t-butyl Hydroxyhydrocinnamate is a hindered-phenol antioxidant (also known as the industrial stabilizer Irganox 1010) used in cosmetic formulations to prevent oxidation and rancidity of oils, fats, and other ingredients. It functions primarily as a formulation stabilizer rather than a skin-active treatment. |
| Retinol Key active Vitamin A derivative / anti-aging active | Retinol is a vitamin A derivative that converts to retinoic acid in the skin, promoting cell turnover and stimulating collagen synthesis. It is widely used to address fine lines, photoaging, and acne. |
| Polysorbate 20 Emulsifier / solubilizer | Polysorbate 20 is a nonionic surfactant derived from sorbitol and lauric acid, used in skincare to solubilize fragrances and essential oils and to stabilize oil-in-water emulsions. It functions primarily as a formulation aid rather than a treatment active. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Bakuchi Extract Formulation / support | |
| Apricot Oil Formulation / support | |
| Bisabolol Key active Soothing/anti-inflammatory agent | Bisabolol is a naturally derived (typically from chamomile) or synthetic terpene alcohol used in skincare for its anti-inflammatory, soothing, and skin-conditioning properties. It is also reported to enhance penetration of other ingredients and offers mild antimicrobial activity. |
| Mulberry Extract Key active Skin-brightening antioxidant | Mulberry extract, derived from the Morus plant, is used in skincare for its antioxidant properties and ability to inhibit tyrosinase, helping to reduce hyperpigmentation and even skin tone. It also contains flavonoids and arbutin-like compounds that may protect against oxidative stress. |
| Chamomile Extract Key active Soothing/anti-inflammatory botanical extract | Chamomile extract is a plant-derived ingredient (commonly from Matricaria chamomilla) used in skincare for its anti-inflammatory, antioxidant, and skin-soothing properties, largely attributed to compounds like bisabolol, chamazulene, and flavonoids. It is often included to calm irritation, redness, and sensitive skin. |
| Ethylhexyl Methoxycrylene Photostabilizer / UV filter solubilizer | Ethylhexyl Methoxycrylene is a synthetic ingredient used in sunscreens to stabilize UV filters such as avobenzone and octinoxate, preventing their photodegradation upon sun exposure. It also acts as a solvent that helps dissolve other UV-absorbing compounds in the formulation. |
| Titanium Dioxide Key active UV filter / mineral sunscreen | Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Sodium PCA Humectant | Sodium PCA (sodium pyrrolidone carboxylic acid) is the sodium salt of pyroglutamic acid and a component of the skin's natural moisturizing factor (NMF). It is widely used in cosmetics as a water-binding humectant to hydrate and soften the skin. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.