Based on its listed ingredients, Monsoon Essentials can feed fungal acne; contains a drying alcohol — details in the flags below.
Below is every ingredient in Monsoon Essentials explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Bisabolol is a naturally derived (typically from chamomile) or synthetic terpene alcohol used in skincare for its anti-inflammatory, soothing, and skin-conditioning properties. It is also reported to enhance penetration of other ingredients and offers mild antimicrobial activity.
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Diethylhexyl Butamido Triazone (Iscotrizinol, Uvasorb HEB) is an organic, oil-soluble UVB filter that absorbs ultraviolet radiation primarily in the UVB range, providing photoprotection in sunscreen and daily-care formulations. It is highly photostable and substantive to skin, often combined with other filters for broad-spectrum coverage.
Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations.
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
Mild contact irritation | Rare | Occasional redness or stinging, usually in sensitive or compromised skin. |
Allergic contact dermatitis | Very rare | Isolated case reports; considered a low-sensitizing ingredient. |
Comedogenicity / clogged pores | Rare | Generally low comedogenic potential, but acne-prone individuals may occasionally react. |
Mild skin irritation | Rare | Occasional transient redness or stinging, typically in sensitive or compromised skin. |
Comedogenicity / acne flare | Rare | Low comedogenic potential, but may contribute to clogged pores in acne-prone individuals at high concentrations. |
Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
Enhanced penetration of co-formulated irritants | Uncommon | As a penetration enhancer it may increase absorption and irritation potential of other actives. |
Skin irritation | Rare | Mild redness or stinging may occur, typically in sensitive individuals. |
Comedogenicity (pore clogging) | Rare | Low comedogenic potential but possible in acne-prone skin. |
Comedogenicity (clogged pores, breakouts) | Uncommon | Considered moderately comedogenic; may aggravate acne in acne-prone individuals. |
Mild transient skin irritation or stinging | Rare | Typically minor and self-limiting, more likely on compromised skin |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Cetearyl Ethylhexanoate Emollient / skin-conditioning agent | Cetearyl ethylhexanoate is an ester emollient derived from cetearyl alcohol and 2-ethylhexanoic acid, used to soften skin and improve a product's spreadability and texture. It functions as a lightweight, non-greasy occlusive that enhances the sensory feel of creams, lotions, and sunscreens. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Neopentyl Glycol Diheptanoate Emollient | Neopentyl Glycol Diheptanoate is a synthetic diester emollient used in skincare and cosmetics to provide a light, non-greasy skin feel and to soften and smooth the skin. It functions as a base/texture ingredient rather than a treatment active. |
| Octyldodecyl Myristate Emollient / skin-conditioning agent | Octyldodecyl Myristate is an ester of myristic acid and octyldodecanol used as an emollient and spreading agent in cosmetics. It softens skin, improves product texture and glide, and acts as a solvent for pigments in color cosmetics. |
| Glyceryl Stearate Emulsifier/emollient | Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active. |
| Xylitol Humectant / moisturizer | Xylitol is a sugar alcohol used in topical formulations as a humectant that helps attract and retain moisture in the skin, and it may support the skin's microbiome and barrier function. It is generally well tolerated and considered safe for topical use. |
| Stearyl Alcohol Emollient/emulsifier | Stearyl alcohol is a fatty alcohol used in skincare as an emollient, emulsion stabilizer, and thickening agent to improve texture and prevent ingredient separation. It softens skin and helps maintain the consistency of creams and lotions. |
| Cetyl Alcohol Emollient / emulsifier | Cetyl alcohol is a fatty alcohol used in skincare and cosmetics as an emollient, thickener, and emulsion stabilizer. It softens skin and helps maintain the consistency and texture of creams and lotions. |
| Polyglyceryl-3 Dicitrate/Stearate Emulsifier | Polyglyceryl-3 Dicitrate/Stearate is a polyglycerol ester used as an oil-in-water emulsifier and emollient to stabilize emulsions in creams and lotions. It is considered a mild, well-tolerated formulation ingredient. |
| Betaine Humectant / osmolyte | Betaine is a naturally derived amino acid derivative (trimethylglycine) used in skincare as a humectant and osmoprotectant that attracts and retains moisture while helping stabilize skin barrier function. It also improves the texture and mildness of formulations. |
| Bisabolol Key active Soothing/anti-inflammatory agent | Bisabolol is a naturally derived (typically from chamomile) or synthetic terpene alcohol used in skincare for its anti-inflammatory, soothing, and skin-conditioning properties. It is also reported to enhance penetration of other ingredients and offers mild antimicrobial activity. |
| Ammonium Polyacryloyldimethyl Taurate Thickener/stabilizer | Ammonium Polyacryloyldimethyl Taurate is a synthetic anionic polymer used as a gelling agent, emulsion stabilizer, and viscosity modifier in cosmetic formulations. It helps create smooth, stable textures in creams, gels, and serums without requiring high heat or complex emulsification. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Caprylic Capric Di Glyceride Formulation / support | |
| Caprylic Capric Monoglyceride Emollient / skin-conditioning agent | Caprylic Capric Monoglyceride is a glyceride ester derived from coconut or palm-based fatty acids used as an emollient and emulsifier in skincare formulations. It softens and conditions the skin while helping stabilize emulsions and improve product texture. |
| Arachidyl Alcohol Emollient / emulsion stabilizer | Arachidyl alcohol is a fatty alcohol (C20) derived from natural oils that functions as an emollient, thickener, and co-emulsifier to stabilize creams and lotions. It improves texture and helps maintain emulsion consistency in skincare formulations. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Acrylates/C10-30 Alkyl Acrylate Crosspolymer Rheology modifier / emulsion stabilizer | Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic crosslinked acrylic polymer used to thicken, gel, and stabilize emulsions in skincare and cosmetic formulations. It helps suspend ingredients and provides a smooth, consistent texture without acting as a treatment active. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Silica Absorbent/texturizer | Silica is a mineral-derived ingredient (silicon dioxide) used in cosmetics to absorb oil and sebum, improve texture, and act as a bulking, anti-caking, or matting agent. It is generally inert and well tolerated on skin. |
| T-Butyl Alcohol Solvent/denaturant | T-Butyl Alcohol (tert-butanol) is a small alcohol used in cosmetic formulations primarily as a solvent and as a denaturant for ethanol, helping dissolve ingredients and reduce product palatability. It is a base/formulation ingredient rather than a treatment active. |
| Methyl Diisopropyl Propionamide Cooling agent | Methyl Diisopropyl Propionamide is a synthetic, non-menthol cooling agent that triggers a sensation of coolness on skin without the strong odor or irritation of menthol. It is commonly used in aftershaves, deodorants, and cosmetic formulations to impart a refreshing feel. |
| Dimethicone/Vinyl Dimethicone Crosspolymer Silicone elastomer / texture enhancer | Dimethicone Vinyl Dimethicone Crosspolymer is a crosslinked silicone elastomer used in skincare and cosmetics to impart a silky, smooth feel, absorb excess oil, blur the appearance of pores and fine lines, and improve product spreadability. It functions as a formulation/sensory agent rather than a biologically active treatment ingredient. |
| Ethylhexyl Methoxycinnamate Key active UV filter (UVB sunscreen) | Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims. |
| Caprylyl Methicone Emollient / spreading agent | Caprylyl Methicone is a volatile silicone fluid used in cosmetic formulations to provide a light, non-greasy, smooth skin feel and to enhance the spreadability of products. It also acts as a solvent and carrier for other ingredients, particularly in sunscreens and color cosmetics. |
| Neopentyl Glycol Diheptanoate Emollient | Neopentyl Glycol Diheptanoate is a synthetic diester emollient used in skincare and cosmetics to provide a light, non-greasy skin feel and to soften and smooth the skin. It functions as a base/texture ingredient rather than a treatment active. |
| Diethylhexyl Butamido Triazone Key active UVB filter (sunscreen agent) | Diethylhexyl Butamido Triazone (Iscotrizinol, Uvasorb HEB) is an organic, oil-soluble UVB filter that absorbs ultraviolet radiation primarily in the UVB range, providing photoprotection in sunscreen and daily-care formulations. It is highly photostable and substantive to skin, often combined with other filters for broad-spectrum coverage. |
| Zinc Oxide Key active UV filter / skin protectant | Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations. |
| Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active UVA filter (sunscreen) | Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens. |
| PEG-12 Dimethicone/PPG-20 Crosspolymer Silicone emulsifier/conditioning agent | PEG-12 Dimethicone/PPG-20 Crosspolymer is a silicone-based crosspolymer used in cosmetic formulations primarily as an emulsifier, emollient, and skin-conditioning agent. It helps stabilize emulsions and impart a smooth, silky feel to products. |
| Tapioca Starch Absorbent / texture enhancer | Tapioca starch is a plant-derived polysaccharide powder used in cosmetics to absorb excess oil and moisture, impart a soft matte finish, and improve the sensory texture of formulations. It functions as a base/formulation ingredient rather than a therapeutic active. |
| Titanium Dioxide Key active UV filter / mineral sunscreen | Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin. |
| Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine Key active UV filter (sunscreen) | Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection. |
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Dicaprylyl Carbonate Emollient / texture enhancer | Dicaprylyl Carbonate is a lightweight, non-greasy emollient derived from coconut-based fatty alcohols and carbonic acid, used to improve skin feel and spreadability in cosmetic formulations. It also acts as a solvent and helps distribute pigments and other ingredients evenly. |
| Physalis Angulata Extract Key active Antioxidant/soothing botanical extract | Physalis Angulata Extract is a plant-derived ingredient used in skincare for its antioxidant, anti-inflammatory, and skin-conditioning properties, often included to help calm and protect the skin. It contains compounds such as physalins and flavonoids that may help mitigate oxidative stress. |
| Alumina Abrasive/opacifying agent | Alumina (aluminum oxide) is a fine, hard mineral powder used in skincare and cosmetics primarily as a physical exfoliant in microdermabrasion products and as a bulking, opacifying, or anticaking agent in formulations. It is largely inert and not absorbed through intact skin. |
| Triethoxycaprylylsilane Coating/surface treatment agent | Triethoxycaprylylsilane is a silane-based ingredient primarily used to coat and hydrophobically treat powders and pigments such as titanium dioxide, zinc oxide, and iron oxides, improving their dispersion, water resistance, and texture in cosmetic formulations. It functions as a formulation aid rather than a skin-treatment active. |
| Polymethylsilsesquioxane Texture enhancer / mattifying agent | Polymethylsilsesquioxane is a silicone-based spherical powder used in skincare and cosmetics to impart a smooth, soft-focus, mattifying feel and improve spreadability. It is a formulation/texture ingredient rather than a treatment active. |
| Simethicone Anti-foaming agent / skin-conditioning emollient | Simethicone is a silicone-based defoaming and skin-conditioning ingredient used in cosmetic formulations to reduce surface foam and impart a smooth, protective feel. It is generally considered inert and non-irritating on skin. |
| Dimethylmethoxy Chromanol Key active Antioxidant | Dimethylmethoxy Chromanol is a synthetic chroman-derived antioxidant (a vitamin E-related molecule) used in cosmetic formulations to neutralize free radicals and protect skin and product stability against oxidative damage. It is marketed for both lipophilic and hydrophilic environments, offering broad-spectrum protection against reactive oxygen and nitrogen species. |
| Tocopherol Key active Antioxidant | Tocopherol (vitamin E) is a lipid-soluble antioxidant used in skincare to protect skin and formulations from oxidative damage caused by free radicals and UV exposure. It also functions as a skin-conditioning and emollient agent and can stabilize oils against rancidity. |
| Sodium Cocoyl Isethionate Mild surfactant/cleansing agent | Sodium Cocoyl Isethionate is a gentle, coconut-derived anionic surfactant widely used in syndet cleansing bars and facial cleansers to produce a creamy lather while being milder than traditional soaps. It cleanses by emulsifying oils and debris with relatively low irritation potential. |
| Cocamidopropyl Betaine Surfactant / foaming cleanser | Cocamidopropyl Betaine is an amphoteric surfactant derived from coconut oil and dimethylaminopropylamine, used in cleansers, shampoos, and body washes to provide gentle foaming, viscosity, and to reduce the harshness of stronger anionic surfactants. It is widely regarded as mild but is a recognized contact allergen. |
| Cocamide MEA Foaming agent / surfactant | Cocamide MEA (Cocamide monoethanolamide) is a coconut oil-derived non-ionic surfactant used in cleansers and shampoos as a foam booster, viscosity enhancer, and emulsion stabilizer. It is a formulation/base ingredient rather than a treatment active. |
| Disod Formulation / support |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.