Below is every ingredient in Oxybenzone & OMC Free Sunscreen explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF.
Tris-Biphenyl Triazine (nano) is a broad-spectrum organic UV filter that protects skin from both UVA and UVB radiation, typically used in nanoparticle form to improve dispersion and aesthetic feel in sunscreen formulations. It is approved as a UV filter in the EU and several other regions.
Octisalate (octyl salicylate) is an organic UVB-absorbing sunscreen agent used to protect skin from ultraviolet radiation. It is often combined with other UV filters to improve photoprotection and helps stabilize and solubilize other filters in formulations.
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection.
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Contact dermatitis / skin irritation | Uncommon | Localized redness, itching, or stinging on application. |
| Photoallergic contact dermatitis | Rare | Reported particularly in adults, sometimes linked to prior ketoprofen sensitization. |
| Allergic contact dermatitis | Rare | Documented in patch-test studies, more often in children with atopic dermatitis. |
| Systemic absorption | Common | Detectable in blood after use; clinical significance unclear and not equated with harm. |
| Benzophenone formation over time | Uncommon | Degradation can yield trace benzophenone; relevance to skin health under study. |
| Skin irritation or mild redness | Rare | Occasional mild irritation reported, generally considered low-irritation. |
| Eye irritation on accidental contact | Rare | Possible with direct exposure during application. |
| Skin irritation or stinging | Uncommon | Mild transient irritation, more likely on sensitive or broken skin. |
| Photoallergic reaction | Rare | Reaction triggered by sun exposure in sensitized individuals. |
| Eye irritation | Uncommon | Can cause stinging if product migrates into the eyes. |
| Mild skin irritation | Rare | Occasional transient irritation reported in sensitive individuals. |
| Comedogenicity (pore clogging) | Rare | Low comedogenic potential but possible in acne-prone skin. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Octocrylene Key active UV filter | Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF. |
| Tris-Biphenyl Triazine (nano) Key active UV filter (broad-spectrum sunscreen) | Tris-Biphenyl Triazine (nano) is a broad-spectrum organic UV filter that protects skin from both UVA and UVB radiation, typically used in nanoparticle form to improve dispersion and aesthetic feel in sunscreen formulations. It is approved as a UV filter in the EU and several other regions. |
| Octisalate Key active UV filter (chemical sunscreen) | Octisalate (octyl salicylate) is an organic UVB-absorbing sunscreen agent used to protect skin from ultraviolet radiation. It is often combined with other UV filters to improve photoprotection and helps stabilize and solubilize other filters in formulations. |
| Isoamyl Laurate Emollient | Isoamyl Laurate is a plant-derived ester (from isoamyl alcohol and lauric acid) used as a lightweight, fast-spreading emollient that improves skin feel and product texture. It functions to soften and condition the skin and acts as a natural alternative to silicones. |
| Neopentyl Glycol Diheptanoate Emollient | Neopentyl Glycol Diheptanoate is a synthetic diester emollient used in skincare and cosmetics to provide a light, non-greasy skin feel and to soften and smooth the skin. It functions as a base/texture ingredient rather than a treatment active. |
| Bis-ethylhexyloxyphenol methoxyphenyl triazine Key active UV filter (sunscreen) | Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Cetearyl Alcohol Emollient/emulsifier | Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions. |
| Caprylyl Methicone Emollient / spreading agent | Caprylyl Methicone is a volatile silicone fluid used in cosmetic formulations to provide a light, non-greasy, smooth skin feel and to enhance the spreadability of products. It also acts as a solvent and carrier for other ingredients, particularly in sunscreens and color cosmetics. |
| Hydrogenated Polydecene Emollient / skin-conditioning agent | Hydrogenated Polydecene is a synthetic hydrocarbon emollient derived from hydrogenated polydecene oligomers, used to provide a lightweight, non-greasy occlusive film that softens skin and improves spreadability in cosmetic formulations. It serves as a base or texture-enhancing ingredient rather than a biologically active treatment. |
| Aloe vera Extract Soothing humectant/emollient | Aloe vera extract is a plant-derived ingredient valued for its hydrating, soothing, and mild anti-inflammatory properties in skincare. It is commonly used to calm irritation and support skin barrier comfort. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Sodium Acrylates Copolymer Thickener / film-forming stabilizer | Sodium Acrylates Copolymer is a synthetic anionic polymer used to thicken, stabilize, and improve the texture of cosmetic formulations, often forming a smooth film on the skin. It functions primarily as a rheology modifier and emulsion stabilizer rather than a treatment active. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Silica Absorbent/texturizer | Silica is a mineral-derived ingredient (silicon dioxide) used in cosmetics to absorb oil and sebum, improve texture, and act as a bulking, anti-caking, or matting agent. It is generally inert and well tolerated on skin. |
| Microcrystalline Wax Thickener/Emollient | Microcrystalline wax is a refined petroleum-derived wax used in cosmetics to thicken formulations, stabilize emulsions, bind oils, and impart structure to products like balms, sticks, and creams. It functions primarily as a texture and consistency agent rather than a skin-active ingredient. |
| PPG-1 Trideceth-6 Surfactant / solubilizer | PPG-1 Trideceth-6 is a polypropylene glycol-derived nonionic surfactant used to solubilize fragrances and oils in aqueous formulations and to help emulsify or clean. It functions as a formulation aid rather than a treatment active. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Potassium Cetyl Phosphate Emulsifier | Potassium Cetyl Phosphate is an anionic emulsifier and surfactant used in oil-in-water formulations to stabilize emulsions and improve texture. It is considered a formulation/base ingredient rather than a treatment active. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Fragrance Fragrance/masking agent | Fragrance refers to a blend of natural or synthetic aromatic compounds added to skincare products to impart a pleasant scent or mask the odor of other ingredients. It serves a sensory and formulation purpose rather than a therapeutic one. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.