Below is every ingredient in Mamaearth Rice Water Hydrating Body Lotion with Rice Water & Niacinamide for Dewy Glass Skin - 600 ml explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Oryza Sativa (Rice) Extract is derived from rice and is used in skincare for its antioxidant, brightening, and soothing properties, owing to its content of ferulic acid, vitamins, and amino acids. It is often included to help even skin tone and provide mild moisturizing and barrier-supporting benefits.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Urea is a naturally occurring component of the skin's natural moisturizing factor that hydrates by attracting and retaining water; at higher concentrations it also softens and exfoliates thickened or scaly skin. It is widely used to treat dry skin conditions such as xerosis, ichthyosis, and hyperkeratosis.
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Tocopheryl acetate is a stable, esterified form of vitamin E commonly used in skincare as an antioxidant and emollient. It is converted to active tocopherol in the skin and helps protect against oxidative stress while supporting the skin barrier.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Comedogenicity (acne/clogged pores) | Common | Considered a moderately to highly comedogenic ingredient; may worsen acne or cause breakouts in acne-prone individuals. |
| Skin irritation | Uncommon | Mild irritation or stinging reported, particularly on compromised or sensitive skin. |
| Allergic contact dermatitis | Rare | Occasional sensitization documented in patch-test studies, though it is generally regarded as a low allergen. |
| Folliculitis | Rare | Follicular irritation linked to its occlusive and pore-clogging tendency. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Mild skin irritation or stinging | Common | More likely at higher concentrations or on compromised/sensitive skin |
| Irritant contact dermatitis | Uncommon | Non-allergic irritation, often dose-dependent |
| Worsening of pre-existing eczema or barrier-impaired skin | Rare | Penetration-enhancing effect may increase reactivity |
| Systemic toxicity from topical use | Very rare | Reported mainly with extensive application on broken skin, especially in infants or burn patients |
| Contact urticaria | Very rare | Reported in those with rice allergy; immediate hives on contact. |
| Mild transient flushing or redness | Uncommon | More likely at higher concentrations or in sensitive skin; usually subsides quickly. |
| Tingling, stinging, or burning sensation | Uncommon | Often associated with higher percentages or compromised barrier. |
| Contact irritation or itching | Rare | Generally dose-dependent and resolves with discontinuation. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Isopropyl Myristate Emollient / skin-conditioning agent | Isopropyl myristate is a synthetic ester of isopropyl alcohol and myristic acid used as an emollient, thickening reducer, and penetration enhancer in cosmetic and topical formulations. It imparts a smooth, non-greasy feel and improves spreadability of products. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Oryza Sativa (Rice) Extract Key active Antioxidant/skin-conditioning | Oryza Sativa (Rice) Extract is derived from rice and is used in skincare for its antioxidant, brightening, and soothing properties, owing to its content of ferulic acid, vitamins, and amino acids. It is often included to help even skin tone and provide mild moisturizing and barrier-supporting benefits. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Butyrospermum Parkii (Shea) Butter Emollient / occlusive moisturizer | Butyrospermum Parkii (Shea) Butter is a plant-derived fat extracted from the nuts of the African shea tree, rich in triglycerides and unsaponifiables. It is widely used in skincare to soften, smooth, and condition the skin while forming an occlusive barrier that reduces water loss. |
| Stearic Acid Emulsifier / thickener | Stearic acid is a saturated long-chain fatty acid widely used in cosmetics as an emulsifier, thickening agent, and emollient to stabilize creams and lotions. It is generally considered a base/formulation ingredient rather than a therapeutic active. |
| Cetearyl Alcohol Emollient/emulsifier | Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions. |
| Palmitic Acid Emollient / surfactant | Palmitic acid is a saturated fatty acid commonly used in skincare as an emollient, emulsifier, and cleansing agent that helps soften skin and stabilize formulations. It is also a natural component of the skin's lipid barrier. |
| Glyceryl Stearate Emulsifier/emollient | Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active. |
| Microcrystalline Wax Thickener/Emollient | Microcrystalline wax is a refined petroleum-derived wax used in cosmetics to thicken formulations, stabilize emulsions, bind oils, and impart structure to products like balms, sticks, and creams. It functions primarily as a texture and consistency agent rather than a skin-active ingredient. |
| Pentylene Glycol Humectant / solvent / preservative-booster | Pentylene glycol is a glycol used in cosmetics as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, helping reduce reliance on traditional preservatives. It improves skin hydration and aids the delivery and stability of other ingredients. |
| Fructose Humectant | Fructose is a simple monosaccharide sugar used in skincare primarily as a humectant that attracts and binds water to help maintain skin hydration. It is generally considered a supporting/base ingredient rather than a therapeutic active. |
| Urea Key active Humectant / keratolytic | Urea is a naturally occurring component of the skin's natural moisturizing factor that hydrates by attracting and retaining water; at higher concentrations it also softens and exfoliates thickened or scaly skin. It is widely used to treat dry skin conditions such as xerosis, ichthyosis, and hyperkeratosis. |
| Citric Acid pH adjuster / AHA exfoliant | Citric acid is an alpha-hydroxy acid derived from citrus fruits, used primarily to adjust and buffer formulation pH and as a chelating agent, and at higher concentrations as a mild chemical exfoliant. It can promote surface cell turnover and is sometimes included in antioxidant or brightening products. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Maltose Humectant / skin-conditioning agent | Maltose is a disaccharide sugar used in skincare primarily as a humectant and skin-conditioning agent, helping to attract and retain moisture in the stratum corneum. It is generally considered a low-risk, well-tolerated formulation ingredient rather than a therapeutic active. |
| Sodium PCA Humectant | Sodium PCA (sodium pyrrolidone carboxylic acid) is the sodium salt of pyroglutamic acid and a component of the skin's natural moisturizing factor (NMF). It is widely used in cosmetics as a water-binding humectant to hydrate and soften the skin. |
| Sodium Chloride Thickener / viscosity adjuster | Sodium chloride (table salt) is commonly used in cosmetics as a thickening and viscosity-control agent, particularly in surfactant-based cleansers, and also acts as a mild abrasive in scrubs. It is generally well tolerated and considered a formulation ingredient rather than a treatment active. |
| Sodium Lactate Humectant / NMF component | Sodium lactate is the sodium salt of lactic acid and a key component of skin's natural moisturizing factor (NMF), used to hydrate the skin and buffer formulation pH. It also has mild exfoliating and humectant properties that help maintain skin moisture and barrier function. |
| Trehalose Humectant / moisturizer | Trehalose is a naturally occurring disaccharide used in skincare as a humectant and protective agent, helping retain moisture and stabilize cell membranes and proteins against dehydration and oxidative stress. It is well tolerated and commonly used to support skin barrier hydration. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Glucose Humectant/skin-conditioning agent | Glucose is a simple sugar used in skincare primarily as a humectant and skin-conditioning ingredient, helping to attract and retain moisture in the skin. It can also serve as a substrate in formulations and contributes to the skin's natural moisturizing factors. |
| IFRA Certified Allergen Free Fragrance Fragrance/masking agent | A fragrance compliant with International Fragrance Association (IFRA) standards and formulated to exclude the 26 EU-designated allergens, used to impart or mask scent in cosmetic products. It is a formulation additive rather than a treatment active. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Xylitol Humectant / moisturizer | Xylitol is a sugar alcohol used in topical formulations as a humectant that helps attract and retain moisture in the skin, and it may support the skin's microbiome and barrier function. It is generally well tolerated and considered safe for topical use. |
| Betaine Humectant / osmolyte | Betaine is a naturally derived amino acid derivative (trimethylglycine) used in skincare as a humectant and osmoprotectant that attracts and retains moisture while helping stabilize skin barrier function. It also improves the texture and mildness of formulations. |
| Phoenix Dactylifera (Date Palm) Extract Antioxidant / skin conditioning | Phoenix Dactylifera (Date Palm) Extract is derived from date fruit or seed and is rich in polyphenols, flavonoids, vitamins, and sugars used in skincare for antioxidant, moisturizing, and skin-conditioning benefits. It is generally considered a supportive botanical ingredient rather than a clinically proven primary active. |
| Sodium Benzoate Preservative | Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Cocos Nucifera (Coconut) Oil Emollient/occlusive | Cocos Nucifera (Coconut) Oil is a plant-derived lipid used as an emollient and occlusive agent to soften skin and reduce transepidermal water loss. It is rich in saturated fatty acids, predominantly lauric acid. |
| AMPS/HEMA Crosspolymer Film former / rheology modifier | AMPS/HEMA Crosspolymer is a synthetic acrylate-based crosslinked polymer used in cosmetic formulations as a thickener, stabilizer, and film-forming agent to improve texture and product stability. It is a formulation/base ingredient rather than a therapeutic active. |
| C13-15 Alkane Emollient / solvent | C13-15 Alkane is a lightweight, plant-derived (often sugarcane-based) liquid hydrocarbon used as an emollient and spreading agent in skincare. It softens skin, improves product texture, and serves as a sustainable alternative to silicones and mineral oil. |
| Coco-Glucoside Mild surfactant/cleanser | Coco Glucoside is a gentle, plant-derived nonionic surfactant (an alkyl polyglucoside made from coconut fatty alcohols and glucose) used as a cleansing and foaming agent in face washes, shampoos, and body cleansers. It is valued for its mildness, biodegradability, and good skin and eye tolerance compared with harsher surfactants. |
| Sodium Gluconate Chelating agent / skin-conditioning | Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment. |
| Tocopheryl Acetate (Vitamin E) Key active Antioxidant / skin conditioning | Tocopheryl acetate is a stable, esterified form of vitamin E commonly used in skincare as an antioxidant and emollient. It is converted to active tocopherol in the skin and helps protect against oxidative stress while supporting the skin barrier. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.