Based on its listed ingredients, Skin Illuminate Sunscreen Gel SPF 50 with Vitamin C & Turmeric for UVA & B Protection - 50 g can feed fungal acne; has higher pore-clogging potential — details in the flags below.
Below is every ingredient in Skin Illuminate Sunscreen Gel SPF 50 with Vitamin C & Turmeric for UVA & B Protection - 50 g explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Suncat DE is a commercial blend of the organic UV filters diethylhexyl butamido triazone and ethylhexyl triazone, providing broad UVB and short-UVA protection in sunscreen formulations. It is typically used as a photostable, oil-soluble filter system in leave-on sun-care products.
PARSOL TX is the trade name for titanium dioxide, a mineral (inorganic) UV filter that provides broad-spectrum protection by reflecting and scattering UVA and UVB radiation. It is commonly micronized or coated to improve cosmetic feel and dispersion in sunscreen formulations.
Curcuma Longa (Turmeric) Root Extract is derived from the turmeric plant and contains curcuminoids valued for their antioxidant, anti-inflammatory, and skin-brightening properties. It is used topically to help reduce oxidative stress, soothe irritation, and improve uneven skin tone.
Tocopheryl acetate is a stable, esterified form of vitamin E commonly used in skincare as an antioxidant and emollient. It is converted to active tocopherol in the skin and helps protect against oxidative stress while supporting the skin barrier.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
Skin irritation | Very rare | Pure water is essentially non-irritating; impurities or hardness minerals are more likely contributors than water itself. |
Transepidermal water loss disruption | Rare | Repeated water exposure without occlusion may compromise the skin barrier in susceptible individuals. |
Contact irritation (mild stinging or redness) | Uncommon | Transient, usually resolves after discontinuation. |
Allergic contact dermatitis | Rare | Sensitization to triazone UV filters is infrequently reported. |
Eye stinging or irritation | Uncommon | From migration into eyes during application. |
Photoallergic reaction | Very rare | Rarely documented for triazone-class filters. |
Skin irritation or contact dermatitis | Rare | Generally well tolerated; occasional irritation reported, often in sensitive skin. |
Folliculitis or clogged pores | Uncommon | May occur in occlusive formulations on acne-prone or oily skin. |
Microbial growth in moisture-rich formulations | Uncommon | As a nutrient substrate, starch can support contamination if products are inadequately preserved. |
Comedogenicity / breakouts | Uncommon | Low comedogenic potential but may contribute to clogged pores in acne-prone skin. |
Contact urticaria | Very rare | Isolated reports of hive-like reactions tied to benzoate moiety. |
Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua (Water) Solvent/Base | Aqua (Water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble ingredients and provides the medium for emulsions. It carries active and functional components and influences product texture. |
| Suncat DE Key active UV filter blend (sunscreen) | Suncat DE is a commercial blend of the organic UV filters diethylhexyl butamido triazone and ethylhexyl triazone, providing broad UVB and short-UVA protection in sunscreen formulations. It is typically used as a photostable, oil-soluble filter system in leave-on sun-care products. |
| Starch Absorbent / Texture enhancer | Starch (commonly corn, rice, or tapioca starch) is a plant-derived polysaccharide used in skincare and cosmetics primarily to absorb oil and moisture, provide a soft matte finish, and improve product texture. It functions as a base/formulation ingredient rather than a therapeutic active. |
| C12-15 Alkyl Benzoate Emollient / texture enhancer | C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Parsol TX Key active UV filter (sunscreen) | PARSOL TX is the trade name for titanium dioxide, a mineral (inorganic) UV filter that provides broad-spectrum protection by reflecting and scattering UVA and UVB radiation. It is commonly micronized or coated to improve cosmetic feel and dispersion in sunscreen formulations. |
| Ethylhexyl Palmitate Emollient / skin-conditioning agent | Ethylhexyl Palmitate is a lightweight ester of 2-ethylhexanol and palmitic acid used as an emollient, solvent, and texture-enhancer in cosmetics. It imparts a silky, dry feel and is often used as a synthetic substitute for mineral oil or silicones. |
| Isopropyl Myristate Emollient / skin-conditioning agent | Isopropyl myristate is a synthetic ester of isopropyl alcohol and myristic acid used as an emollient, thickening reducer, and penetration enhancer in cosmetic and topical formulations. It imparts a smooth, non-greasy feel and improves spreadability of products. |
| Ascorbyl Glucoside ( Vitamin C ) Formulation / support | |
| Sodium Lactate Humectant / NMF component | Sodium lactate is the sodium salt of lactic acid and a key component of skin's natural moisturizing factor (NMF), used to hydrate the skin and buffer formulation pH. It also has mild exfoliating and humectant properties that help maintain skin moisture and barrier function. |
| Sucrose Cocoate Emollient/surfactant | Sucrose Cocoate is a sugar-based ester of sucrose and coconut fatty acids used as a mild nonionic surfactant, emulsifier, and emollient in skincare and cleansing formulations. It helps condition the skin and stabilize emulsions while being relatively gentle. |
| Sorbitan Stearate Emulsifier / surfactant | Sorbitan stearate is a non-ionic emulsifier derived from sorbitol and stearic acid, used to stabilize oil-in-water emulsions and improve texture in creams and lotions. It functions as a formulation aid rather than a therapeutic active. |
| Acrylates/C10-30 Alkyl Acrylate Crosspolymer Rheology modifier / emulsion stabilizer | Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic crosslinked acrylic polymer used to thicken, gel, and stabilize emulsions in skincare and cosmetic formulations. It helps suspend ingredients and provides a smooth, consistent texture without acting as a treatment active. |
| Betaine Humectant / osmolyte | Betaine is a naturally derived amino acid derivative (trimethylglycine) used in skincare as a humectant and osmoprotectant that attracts and retains moisture while helping stabilize skin barrier function. It also improves the texture and mildness of formulations. |
| Glyceryl Stearate Emulsifier/emollient | Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active. |
| Curcuma Longa (Turmeric) Root Extract Key active Antioxidant/anti-inflammatory | Curcuma Longa (Turmeric) Root Extract is derived from the turmeric plant and contains curcuminoids valued for their antioxidant, anti-inflammatory, and skin-brightening properties. It is used topically to help reduce oxidative stress, soothe irritation, and improve uneven skin tone. |
| Tocopheryl Acetate (Vitamin E) Key active Antioxidant / skin conditioning | Tocopheryl acetate is a stable, esterified form of vitamin E commonly used in skincare as an antioxidant and emollient. It is converted to active tocopherol in the skin and helps protect against oxidative stress while supporting the skin barrier. |
| Sodium Benzoate Preservative | Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5. |
| Sodium Gluconate Chelating agent / skin-conditioning | Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment. |
| Sodium Hyaluronate ( Hyaluronic Acid ) Formulation / support | |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.