Below is every ingredient in Turmeric Shield | SPF 40 PA+++ explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Homosalate is an organic (chemical) UV filter primarily absorbing UVB radiation, commonly used in sunscreens to help prevent sunburn. It is often combined with other filters as it is relatively unstable and offers limited UVA protection on its own.
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations.
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection.
Curcuma Longa (turmeric) Oil is a volatile oil derived from turmeric rhizomes, used in skincare for its antioxidant, anti-inflammatory, and antimicrobial properties. It contains turmerones and other terpenoids that may help soothe skin and combat oxidative stress.
Glucosyl hesperidin is a water-soluble glycosylated derivative of the citrus flavonoid hesperidin used in skincare for its antioxidant, anti-inflammatory, and microcirculation-supporting properties. It is more soluble and bioavailable than native hesperidin, supporting reduction of redness and improvement of skin tone.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin dryness or barrier disruption with excessive contact | Uncommon | Frequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss. |
| Irritation from impurities or hard water minerals | Rare | Reactions are attributed to contaminants, chlorine, or mineral content rather than water itself. |
| Contact irritation or stinging | Uncommon | Mild transient irritation, especially around the eyes or on sensitive skin. |
| Allergic contact dermatitis | Rare | Sensitization reactions confirmed by patch testing are infrequent. |
| Photoallergic/photocontact reaction | Rare | Reaction triggered by sun exposure after application. |
| Potential endocrine activity | Very rare | Weak estrogenic effects observed in laboratory/animal studies; human clinical relevance at typical use levels remains under regulatory review. |
| Skin irritation or mild contact dermatitis | Rare | Occasional reports of localized redness or irritation, generally mild. |
| Allergic contact dermatitis / sensitization | Very rare | Isolated case reports; considered a low-sensitizing UV filter. |
| Photoallergic reaction | Very rare | Uncommon given its photostability, but possible in sensitive individuals. |
| White cast / cosmetic residue on skin | Common | Non-micronized particles can leave a visible white film, especially on darker skin tones. |
| Dryness or mild skin tightness | Uncommon | Due to its astringent nature, particularly in high concentrations. |
| Clogged pores / acne aggravation | Uncommon | More often attributed to occlusive base ingredients than to zinc oxide itself. |
| Contact dermatitis / skin irritation | Rare | Occasional reports of mild irritation or redness in sensitive individuals. |
| Stinging or eye irritation | Rare | May occur if product migrates into the eyes, generally formulation-related. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| Homosalate Key active UV filter (sunscreen) | Homosalate is an organic (chemical) UV filter primarily absorbing UVB radiation, commonly used in sunscreens to help prevent sunburn. It is often combined with other filters as it is relatively unstable and offers limited UVA protection on its own. |
| Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active UVA filter (sunscreen) | Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens. |
| Zinc Oxide Key active UV filter / skin protectant | Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations. |
| Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine Key active UV filter (sunscreen) | Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection. |
| Caprylyl Methicone Emollient / spreading agent | Caprylyl Methicone is a volatile silicone fluid used in cosmetic formulations to provide a light, non-greasy, smooth skin feel and to enhance the spreadability of products. It also acts as a solvent and carrier for other ingredients, particularly in sunscreens and color cosmetics. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| C12-15 Alkyl Benzoate Emollient / texture enhancer | C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active. |
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Phytosteryl/Octyldodecyl Lauroyl Glutamate Emollient / skin-conditioning agent | Phytosteryl/Octyldodecyl Lauroyl Glutamate is a lipid-based ester derived from amino acids, plant sterols, and fatty alcohols used to soften skin, support the lipid barrier, and improve texture in emulsions. It functions as an emollient and skin-conditioning agent rather than a therapeutic active. |
| Curcuma Longa Oil Key active Antioxidant / anti-inflammatory | Curcuma Longa (turmeric) Oil is a volatile oil derived from turmeric rhizomes, used in skincare for its antioxidant, anti-inflammatory, and antimicrobial properties. It contains turmerones and other terpenoids that may help soothe skin and combat oxidative stress. |
| Saccharide Isomerate Humectant / moisturizer | Saccharide Isomerate is a plant-derived carbohydrate complex that binds to the skin's keratin to provide long-lasting hydration and improve moisture retention. It is structurally similar to carbohydrates naturally found in the skin's upper layers. |
| Isododecane Emollient/solvent | Isododecane is a lightweight, volatile branched-chain hydrocarbon used as a solvent and emollient in cosmetics. It spreads easily and evaporates quickly, improving texture and wear in products like long-lasting makeup, primers, and sunscreens. |
| Glucosyl Hesperidin Key active Brightening / anti-inflammatory active | Glucosyl hesperidin is a water-soluble glycosylated derivative of the citrus flavonoid hesperidin used in skincare for its antioxidant, anti-inflammatory, and microcirculation-supporting properties. It is more soluble and bioavailable than native hesperidin, supporting reduction of redness and improvement of skin tone. |
| Melissa Officinalis Leaf Extract Key active Antioxidant/soothing botanical extract | Melissa Officinalis (lemon balm) Leaf Extract is a plant-derived ingredient valued for its antioxidant, antimicrobial, and soothing properties, often attributed to rosmarinic acid and other polyphenols. It is used in topical formulations to help calm skin and may have antiviral activity studied in the context of herpes simplex. |
| Hordeum Distichon Extract Skin conditioning / soothing agent | Hordeum Distichon (barley) Extract is a botanical derived from two-row barley, used in skincare for its conditioning, antioxidant, and soothing properties. It contains polysaccharides, amino acids, vitamins, and beta-glucans that support skin hydration and barrier function. |
| Caesalpinia Spinosa Fruit Pod Extract Skin-conditioning / humectant | Caesalpinia Spinosa (tara) fruit pod extract is a plant-derived ingredient rich in polysaccharides and tannins, used in skincare for its film-forming, hydrating, and antioxidant properties. It is often included to provide a smoothing, moisture-retaining effect and to support skin barrier comfort. |
| Glyceryl Caprylate Emollient / antimicrobial co-preservative | Glyceryl Caprylate is a monoglyceride derived from glycerin and caprylic acid, used in skincare as an emollient, moisturizing agent, and skin-conditioning component with mild antimicrobial properties that support preservation. It is commonly employed to help stabilize formulations and reduce reliance on conventional preservatives. |
| Dimethiconol Emollient/silicone conditioning agent | Dimethiconol is a silicone-based polymer used in skincare and haircare to provide smoothing, conditioning, and a soft, non-greasy emollient feel. It forms a thin, breathable film that reduces moisture loss and improves spreadability of formulations. |
| Sodium Acrylates Copolymer Thickener / film-forming stabilizer | Sodium Acrylates Copolymer is a synthetic anionic polymer used to thicken, stabilize, and improve the texture of cosmetic formulations, often forming a smooth film on the skin. It functions primarily as a rheology modifier and emulsion stabilizer rather than a treatment active. |
| Helianthus Annuus Sprout Extract Key active Antioxidant/skin-conditioning | Helianthus Annuus (sunflower) Sprout Extract is a plant-derived ingredient rich in antioxidants, peptides, and phytonutrients used in skincare to support skin conditioning and protect against oxidative stress. It is often included for its moisturizing and soothing properties. |
| Polyhydroxystearic Acid Dispersant/emulsifier | Polyhydroxystearic acid is a fatty acid derivative used in cosmetic formulations primarily as a dispersing agent and emulsifier, helping to evenly distribute pigments (such as titanium dioxide and zinc oxide in sunscreens) and stabilize oil-based or water-in-oil systems. It improves texture, spreadability, and uniformity rather than providing a direct biological skin benefit. |
| Lauryl Glucoside Surfactant/cleansing agent | Lauryl Glucoside is a non-ionic surfactant derived from coconut/palm fatty alcohols and glucose, used as a mild cleansing and foaming agent in skin and hair care products. It is considered gentle and biodegradable, often replacing harsher anionic surfactants. |
| Isohexadecane Emollient / solvent | Isohexadecane is a synthetic, branched-chain hydrocarbon (saturated isoparaffin) used as a lightweight emollient, solvent, and spreading agent in cosmetic formulations. It imparts a silky, non-greasy feel and helps disperse pigments and other ingredients. |
| Cetearyl Alcohol Emollient/emulsifier | Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions. |
| Cetearyl Glucoside Emulsifier | Cetearyl Glucoside is a plant-derived (glucose and fatty alcohol) nonionic emulsifier used to blend oil and water phases and stabilize creams and lotions. It is valued for being mild and well-tolerated in cosmetic formulations. |
| Polyglyceryl-6 Laurate Emulsifier / surfactant | Polyglyceryl-6 Laurate is a non-ionic, plant-derived emulsifier made from glycerin and lauric acid, used to blend oil and water phases and improve texture in skincare formulations. It is mild and commonly chosen for natural or low-irritation products. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Lecithin Emollient / Emulsifier | Lecithin is a naturally occurring phospholipid (commonly derived from soybean or egg) used in skincare as an emulsifier, emollient, and penetration enhancer. It helps stabilize oil-and-water formulations and supports the skin barrier by mimicking natural lipids. |
| Hydrolyzed Jojoba Esters Emollient / Skin-conditioning agent | Hydrolyzed Jojoba Esters are water-dispersible esters derived from jojoba oil, used to soften and condition the skin and to provide a smooth, non-greasy feel. They function primarily as an emollient and texture enhancer in cosmetic formulations rather than as a treatment active. |
| Dimethicone/Bis-Isobutyl PPG-20 Crosspolymer Silicone-based film former/emollient | Dimethicone/Bis-Isobutyl PPG-20 Crosspolymer is a crosslinked silicone polymer used in cosmetic formulations to impart a smooth, silky skin feel, improve spreadability, and form a flexible, breathable film. It functions primarily as an emollient, texture enhancer, and skin-conditioning agent rather than as a therapeutic active. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Myristyl Glucoside Emulsifier / surfactant | Myristyl Glucoside is a mild, plant-derived nonionic surfactant and emulsifier produced from myristyl alcohol and glucose, used to stabilize oil-in-water emulsions and provide gentle cleansing. It functions as a formulation aid rather than a treatment active. |
| Caprylhydroxamic Acid Preservative / chelating agent | Caprylhydroxamic acid is a glycine-derived hydroxamic acid used primarily as a preservative and chelating agent in cosmetic formulations, where it helps control microbial growth (especially fungi) and stabilizes products by binding trace metal ions. It is typically used in combination with other preservatives such as glycols and is effective across a relatively wide pH range. |
| Sclerotium Gum Thickener / stabilizer | Sclerotium Gum is a natural polysaccharide produced by fermentation of the fungus Sclerotium rolfsii, used as a thickening, gelling, and emulsion-stabilizing agent in cosmetic formulations. It also imparts a smooth skin feel and helps suspend particles in creams, gels, and serums. |
| Pullulan Film-forming agent / texturizer | Pullulan is a naturally derived polysaccharide produced by fermentation of starch by the fungus Aureobasidium pullulans. In skincare it forms a thin, breathable film on the skin, providing a temporary tightening or smoothing effect and helping to stabilize formulations. |
| Polysorbate 60 Emulsifier / surfactant | Polysorbate 60 is a nonionic surfactant and emulsifier derived from sorbitol and stearic acid, used to blend oil and water phases and stabilize emulsions in creams and lotions. It functions as a formulation aid rather than a therapeutic active. |
| Sodium Gluconate Chelating agent / skin-conditioning | Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Silica Absorbent/texturizer | Silica is a mineral-derived ingredient (silicon dioxide) used in cosmetics to absorb oil and sebum, improve texture, and act as a bulking, anti-caking, or matting agent. It is generally inert and well tolerated on skin. |
| Citric Acid pH adjuster / AHA exfoliant | Citric acid is an alpha-hydroxy acid derived from citrus fruits, used primarily to adjust and buffer formulation pH and as a chelating agent, and at higher concentrations as a mild chemical exfoliant. It can promote surface cell turnover and is sometimes included in antioxidant or brightening products. |
| Sodium Citrate pH adjuster / chelating agent | Sodium citrate is the sodium salt of citric acid used in skincare primarily as a buffering agent to stabilize formulation pH and as a chelator that binds metal ions to improve product stability. It is a base/formulation ingredient rather than a therapeutic active. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.