Aqualogica · 🇮🇳 India

Bright+ Tone Up Sunscreen 50g

30 ingredients
What's in it

Below is every ingredient in Bright+ Tone Up Sunscreen 50g explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
2 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: Low
Highest comedogenic rating 1/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Your questions, answered from the ingredient list

Is Bright+ Tone Up Sunscreen 50g fungal-acne safe?
Based on its listed ingredients, Bright+ Tone Up Sunscreen 50g contains 2 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): Glyceryl Glucoside, Kojic Dipalmitate. If you are fungal-acne prone, you may want to avoid these.
Does Bright+ Tone Up Sunscreen 50g contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of Bright+ Tone Up Sunscreen 50g.
Will Bright+ Tone Up Sunscreen 50g clog pores?
The highest comedogenic rating among its listed ingredients is 1/5 (low). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is Bright+ Tone Up Sunscreen 50g safe to use in pregnancy?
None of its listed ingredients are flagged for pregnancy caution in our reference data — but always confirm your full routine with your own doctor.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

Diethylamino Hydroxybenzoyl Hexyl Benzoate
UVA filter (sunscreen)

Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.

Ethylhexyl Triazone
UVB sunscreen filter

Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF.

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
UV filter (sunscreen)

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection.

Titanium Dioxide
UV filter / mineral sunscreen

Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.

Vaccinium Angustifolium Fruit Extract
Antioxidant

Vaccinium Angustifolium (lowbush blueberry) fruit extract is a botanical ingredient rich in polyphenols, anthocyanins, and vitamins used in skincare for its antioxidant and skin-conditioning properties. It helps neutralize free radicals and may support skin protection against oxidative stress.

Kojic Dipalmitate
Skin-brightening agent

Kojic Dipalmitate is a more stable, lipid-soluble ester derivative of kojic acid used to inhibit tyrosinase and reduce melanin production, helping to address hyperpigmentation and uneven skin tone. It is generally better tolerated and less prone to oxidation than kojic acid itself.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Irritation or sensitivityVery rarePurified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water.
Transepidermal water loss aggravation in compromised skinRareEvaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent.
Skin irritationRareGenerally well tolerated; mild irritation possible in sensitive individuals.
Allergic contact dermatitisRareUncommon sensitization reactions reported, sometimes linked to benzoate component.
Comedogenicity / breakoutsUncommonLow comedogenic potential but may contribute to clogged pores in acne-prone skin.
Contact urticariaVery rareIsolated reports of hive-like reactions tied to benzoate moiety.
Skin irritation or mild contact dermatitisRareOccasional reports of localized redness or irritation, generally mild.
Allergic contact dermatitis / sensitizationVery rareIsolated case reports; considered a low-sensitizing UV filter.
Photoallergic reactionVery rareUncommon given its photostability, but possible in sensitive individuals.
Contact irritationRareMild redness or stinging occasionally reported, generally well tolerated.
Mild skin irritationUncommonTransient stinging or redness, more likely on compromised or sensitive skin.
Enhanced penetration of co-formulated irritantsUncommonAs a penetration enhancer it may increase absorption and irritation potential of other actives.
Contact dermatitis / skin irritationRareOccasional reports of mild irritation or redness in sensitive individuals.
Stinging or eye irritationRareMay occur if product migrates into the eyes, generally formulation-related.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Aqua
Solvent / vehicle
Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery.
C12-15 Alkyl Benzoate
Emollient / texture enhancer
C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active.
Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active
UVA filter (sunscreen)
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Ethylhexyl Triazone Key active
UVB sunscreen filter
Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF.
Propanediol
Humectant/solvent
Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives.
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine Key active
UV filter (sunscreen)
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection.
Synthetic Fluorphlogopite
Cosmetic colorant/pearlescent base
Synthetic Fluorphlogopite is a lab-made synthetic mica used as a substrate for pearlescent and shimmer pigments in cosmetics, valued for its high purity, smooth texture, and consistent light-reflecting properties. It functions as a base or carrier ingredient rather than a skin-active.
Titanium Dioxide Key active
UV filter / mineral sunscreen
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Tin Oxide
Opacifier / colorant additive
Tin oxide is an inorganic mineral compound used in cosmetics primarily as an opacifier and to enhance the luster or sparkle of pearlescent pigments and mica-based colorants. It serves a formulation and aesthetic role rather than providing any skincare treatment benefit.
Glycerin
Humectant
Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations.
Dicaprylyl Carbonate
Emollient / texture enhancer
Dicaprylyl Carbonate is a lightweight, non-greasy emollient derived from coconut-based fatty alcohols and carbonic acid, used to improve skin feel and spreadability in cosmetic formulations. It also acts as a solvent and helps distribute pigments and other ingredients evenly.
Vaccinium Angustifolium Fruit Extract Key active
Antioxidant
Vaccinium Angustifolium (lowbush blueberry) fruit extract is a botanical ingredient rich in polyphenols, anthocyanins, and vitamins used in skincare for its antioxidant and skin-conditioning properties. It helps neutralize free radicals and may support skin protection against oxidative stress.
Sodium Hyaluronate
Humectant / hydrator
Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid.
Kojic Dipalmitate Key active
Skin-brightening agent
Kojic Dipalmitate is a more stable, lipid-soluble ester derivative of kojic acid used to inhibit tyrosinase and reduce melanin production, helping to address hyperpigmentation and uneven skin tone. It is generally better tolerated and less prone to oxidation than kojic acid itself.
Trehalose
Humectant / moisturizer
Trehalose is a naturally occurring disaccharide used in skincare as a humectant and protective agent, helping retain moisture and stabilize cell membranes and proteins against dehydration and oxidative stress. It is well tolerated and commonly used to support skin barrier hydration.
Aminomethyl Propanol
pH adjuster / neutralizer
Aminomethyl Propanol (AMP) is an alkaline organic amine used to adjust and buffer the pH of cosmetic formulations, commonly neutralizing acidic gelling agents like carbomers to thicken or stabilize products. It functions as a formulation aid rather than a skin-treatment active.
HEMA
Adhesive monomer / acrylate
HEMA (2-hydroxyethyl methacrylate) is a methacrylate monomer widely used in artificial nails, gel polishes, and dental and medical adhesives to provide film-forming and bonding properties. It is a formulation ingredient rather than a skin-treatment active, valued for its ability to polymerize into durable resins.
Crosspolymer
Texture modifier / thickener
Crosspolymers are cross-linked synthetic polymers (e.g., carbomer or dimethicone crosspolymers) used to thicken, stabilize, and improve the sensory feel of formulations. They function as rheology modifiers and film-formers rather than as biologically active treatment ingredients.
C13-15 Alkane
Emollient / solvent
C13-15 Alkane is a lightweight, plant-derived (often sugarcane-based) liquid hydrocarbon used as an emollient and spreading agent in skincare. It softens skin, improves product texture, and serves as a sustainable alternative to silicones and mineral oil.
Coco-Glucoside
Mild surfactant/cleanser
Coco Glucoside is a gentle, plant-derived nonionic surfactant (an alkyl polyglucoside made from coconut fatty alcohols and glucose) used as a cleansing and foaming agent in face washes, shampoos, and body cleansers. It is valued for its mildness, biodegradability, and good skin and eye tolerance compared with harsher surfactants.
Butylene Glycol
Humectant / solvent
Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations.
Theobroma Cacao Seed Extract Key active
Antioxidant/emollient
Theobroma Cacao Seed Extract is derived from cocoa beans and is rich in polyphenols, flavonoids, and fatty acids that provide antioxidant and skin-conditioning benefits. It is commonly used in skincare for its soothing, moisturizing, and free-radical-scavenging properties.
Phenoxyethanol
Preservative
Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment.
Glyceryl Glucoside Key active
Humectant / moisturizer
Glyceryl glucoside is a naturally occurring sugar-glycerol compound used in skincare as a humectant that attracts and binds water to the skin. It is also studied for its ability to stimulate aquaporin water-channel expression, supporting skin hydration and barrier function.
Iron Oxides
Colorant/pigment
Iron oxides are inorganic mineral pigments (red, yellow, black) widely used in cosmetics to impart color and provide some visible-light and UV protection in tinted sunscreens and foundations. They are valued for their stability, opacity, and low reactivity.
Hydrolyzed Yeast Protein
Conditioning/film-forming agent
Hydrolyzed Yeast Protein is a yeast-derived protein broken into smaller peptides and amino acids, used in skincare for its skin-conditioning, moisturizing, and film-forming properties. It can help improve skin hydration and surface smoothness.
Sodium Gluconate
Chelating agent / skin-conditioning
Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment.
Tocopheryl Acetate Key active
Antioxidant
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Allantoin Key active
Soothing/skin-conditioning agent
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Aloe Barbadensis Leaf Extract
Soothing/moisturizing agent
Aloe Barbadensis Leaf Extract is derived from the aloe vera plant and is used in skincare for its hydrating, soothing, and mild anti-inflammatory properties. It is commonly included as a supportive base ingredient rather than a primary treatment active.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →