Below is every ingredient in Detan & Hydrate Trio explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure.
Benzophenone-3 (oxybenzone) is a broad-spectrum chemical UV filter that absorbs both UVB and short UVA radiation, commonly used in sunscreens and as a photostabilizer in cosmetic formulations. It also helps protect product integrity by preventing UV degradation of other ingredients.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Oxothiazolidine (procysteine, a 2-oxothiazolidine-4-carboxylic acid derivative) is a cysteine prodrug used in skincare as an antioxidant intended to support intracellular glutathione synthesis. It is studied for its potential to reduce oxidative stress and contribute to skin brightening or protective effects.
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Skin irritation | Rare | Generally well tolerated; mild irritation possible in sensitive individuals. |
| Allergic contact dermatitis | Rare | Uncommon sensitization reactions reported, sometimes linked to benzoate component. |
| Comedogenicity / breakouts | Uncommon | Low comedogenic potential but may contribute to clogged pores in acne-prone skin. |
| Contact urticaria | Very rare | Isolated reports of hive-like reactions tied to benzoate moiety. |
| Contact irritation or mild stinging | Uncommon | Transient skin irritation, especially on sensitive or compromised skin. |
| Photoallergic contact dermatitis | Rare | Reaction triggered by combined exposure to the ingredient and sunlight. |
| Potential endocrine/estrogenic activity | Very rare | Suggested by in vitro and animal studies; human relevance at cosmetic exposure levels remains uncertain. |
| Mild skin irritation or redness | Rare | Generally considered non-irritating; occasional mild reactions reported. |
| Clogged pores / comedogenic-related breakouts | Uncommon | Often anecdotal; dimethicone is largely regarded as non-comedogenic but may trap debris if skin is not cleansed well. |
| Eye irritation on accidental contact | Rare | Transient stinging or discomfort if product enters the eyes. |
| Mild skin irritation | Rare | Occasional transient redness or stinging, typically in sensitive individuals or with high concentrations. |
| Contact dermatitis / allergic reaction | Very rare | Allergic sensitization is uncommon; reactions may relate to residual monomers or other formulation components. |
| Temporary tightness or dryness | Uncommon | Film-forming effect can produce a sensation of skin tightness in some users. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| C12-15 Alkyl Benzoate Emollient / texture enhancer | C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active. |
| Ethylhexyl Methoxycinnamate Key active UV filter (UVB sunscreen) | Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Sodium Acrylates Copolymer Thickener / film-forming stabilizer | Sodium Acrylates Copolymer is a synthetic anionic polymer used to thicken, stabilize, and improve the texture of cosmetic formulations, often forming a smooth film on the skin. It functions primarily as a rheology modifier and emulsion stabilizer rather than a treatment active. |
| Butyl Methoxydibenzoylmethane Key active UV filter (UVA sunscreen) | Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Benzophenone-3 Key active UV filter (sunscreen agent) | Benzophenone-3 (oxybenzone) is a broad-spectrum chemical UV filter that absorbs both UVB and short UVA radiation, commonly used in sunscreens and as a photostabilizer in cosmetic formulations. It also helps protect product integrity by preventing UV degradation of other ingredients. |
| 1,3 Butylene glycol Humectant / solvent | 1,3-Butylene glycol is a small diol used in skincare as a humectant, solvent, and viscosity modifier that helps retain moisture and improve product texture. It also has mild antimicrobial properties that can aid preservation. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Lecithin Emollient / Emulsifier | Lecithin is a naturally occurring phospholipid (commonly derived from soybean or egg) used in skincare as an emulsifier, emollient, and penetration enhancer. It helps stabilize oil-and-water formulations and supports the skin barrier by mimicking natural lipids. |
| Sodium Levulinate Preservative / humectant | Sodium Levulinate is the sodium salt of levulinic acid, derived from natural sugars, used primarily as a mild preservative and antimicrobial agent that also provides moisturizing properties. It is often paired with sodium anisate in natural-leaning preservative systems. |
| Xylitol Humectant / moisturizer | Xylitol is a sugar alcohol used in topical formulations as a humectant that helps attract and retain moisture in the skin, and it may support the skin's microbiome and barrier function. It is generally well tolerated and considered safe for topical use. |
| Glucose Humectant/skin-conditioning agent | Glucose is a simple sugar used in skincare primarily as a humectant and skin-conditioning ingredient, helping to attract and retain moisture in the skin. It can also serve as a substrate in formulations and contributes to the skin's natural moisturizing factors. |
| Phospholipids Emollient / skin-conditioning agent and liposome-forming emulsifier | Phospholipids are amphiphilic lipids (commonly derived from soy or egg lecithin) used in skincare to form liposomes, stabilize emulsions, and reinforce the skin barrier. They also enhance penetration and delivery of other actives. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Ethoxydiglycol Solvent / penetration enhancer | Ethoxydiglycol (diethylene glycol monoethyl ether) is a glycol ether used in cosmetic formulations primarily as a solvent and viscosity reducer that helps dissolve active ingredients and improve their skin penetration. It is considered a formulation aid rather than a therapeutic active. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Oxothiazolidine Key active Antioxidant / cysteine precursor | Oxothiazolidine (procysteine, a 2-oxothiazolidine-4-carboxylic acid derivative) is a cysteine prodrug used in skincare as an antioxidant intended to support intracellular glutathione synthesis. It is studied for its potential to reduce oxidative stress and contribute to skin brightening or protective effects. |
| Anhydroxylitol Humectant / moisturizing agent | Anhydroxylitol is a sugar-derived (xylitol) humectant used in skincare to attract and retain water, helping to maintain skin hydration and barrier function. It is often combined with xylitol and xylitylglucoside to enhance the skin's natural moisturizing factors. |
| Aloe Barbadensis (Aloe Vera) Leaf Juice Soothing/humectant | Aloe Barbadensis leaf juice is a plant-derived extract used in skincare for its hydrating, soothing, and emollient properties. It is commonly included as a base or supporting ingredient to calm and moisturize the skin. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Glyceryl Stearate Emulsifier/emollient | Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active. |
| D-Alpha Tocopheryl Acetate Key active Antioxidant / skin-conditioning agent | D-Alpha Tocopheryl Acetate is a stable, esterified form of vitamin E used in skincare for its antioxidant and emollient properties. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Vaccinum Sect. Cyanococcus (Blueberry) Fruit Extract Key active Antioxidant | Blueberry fruit extract is a botanical ingredient rich in anthocyanins, polyphenols, and vitamins used in skincare for its antioxidant and skin-conditioning properties. It is generally well tolerated and primarily helps protect skin from free-radical and environmental oxidative stress. |
| Citrus Paradisi (Grapefruit) Extract Antioxidant / fragrance-aromatic extract | Citrus paradisi (Grapefruit) Extract is derived from grapefruit fruit and peel, providing antioxidants (flavonoids, vitamin C) and natural fragrance in skincare formulations. It is sometimes used for its purported toning and brightening properties. |
| Phoenix Dactylifera Extract Key active Antioxidant / skin-conditioning | Phoenix Dactylifera (date palm) Extract is derived from date fruit or seeds and is used in cosmetics for its antioxidant, moisturizing, and skin-conditioning properties, owing to its content of polyphenols, flavonoids, sugars, and vitamins. It is generally considered well tolerated in topical formulations. |
| Glyceryl Glucoside Key active Humectant / moisturizer | Glyceryl glucoside is a naturally occurring sugar-glycerol compound used in skincare as a humectant that attracts and binds water to the skin. It is also studied for its ability to stimulate aquaporin water-channel expression, supporting skin hydration and barrier function. |
| Zinc Oxide Key active UV filter / skin protectant | Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations. |
| Cyclopentasiloxane Emollient/silicone | Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations. |
| Glycolic Acid Key active Chemical exfoliant (AHA) | Glycolic acid is an alpha-hydroxy acid derived from sugar cane that exfoliates by loosening bonds between dead skin cells on the surface, promoting cell turnover and improving texture, tone, and fine lines. It is one of the smallest AHAs, allowing relatively deep penetration into the skin. |
| Hyaluronic Acid Key active Humectant / hydrating agent | Hyaluronic acid is a glycosaminoglycan that attracts and binds water to the skin, helping to maintain hydration and improve the appearance of plumpness and smoothness. It is widely used in moisturizers and serums and is generally well tolerated across skin types. |
| PEG-10 Dimethicone Silicone-based emulsifier/conditioning agent | PEG-10 Dimethicone is a water-dispersible, PEG-modified silicone used in cosmetics as an emulsifier, surfactant, and skin-conditioning agent that imparts a smooth, silky feel and helps stabilize emulsions. It is considered a formulation/base ingredient rather than a therapeutic active. |
| Helianthus Annuus (Sunflower) Seed Oil Emollient / skin-conditioning oil | Helianthus Annuus (Sunflower) Seed Oil is a plant-derived oil rich in linoleic acid and vitamin E used to soften skin and support the skin barrier. It functions as an emollient and occlusive agent in many cosmetic formulations. |
| E-Ascorbic Acid Key active Antioxidant / brightening active | L-Ascorbic acid (vitamin C) is a water-soluble antioxidant used in topical skincare to neutralize free radicals, support collagen synthesis, and reduce hyperpigmentation. It is typically formulated at low pH for stability and skin penetration. |
| Solanum Lycopersicum (Tomato) Extract Key active Antioxidant/skin-conditioning | Solanum Lycopersicum (Tomato) Extract is a botanical extract rich in carotenoids such as lycopene, vitamins, and polyphenols, used in skincare for its antioxidant and skin-conditioning properties. It may help mitigate oxidative stress and is included in formulations targeting environmental damage and uneven tone. |
| C9-12 Alkane Emollient / solvent | C9-12 Alkane is a lightweight, biodegradable hydrocarbon blend derived from plant sources (often used as a sustainable alternative to silicones and volatile silicones). It functions as a spreading agent, emollient, and solvent that improves texture and skin feel in cosmetic formulations. |
| Hydrogen Dimethicone Silicone emollient/film-former | Hydrogen Dimethicone is a silicone-based polymer used as an emollient, film-forming agent, and water-repellent coating in cosmetic and skincare formulations. It imparts a smooth, conditioning feel and is often used to coat pigments or improve spreadability. |
| Titanium Dioxide Key active UV filter / mineral sunscreen | Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin. |
| Aluminum Hydroxide Opacifier/colorant & skin protectant | Aluminum hydroxide is an inorganic compound used in cosmetics primarily as an opacifying agent, mild absorbent, and coating for pigments (such as in sunscreens and color cosmetics). It can also act as a buffering and skin-protectant ingredient in some topical formulations. |
| Polyhydroxystearic Acid Dispersant/emulsifier | Polyhydroxystearic acid is a fatty acid derivative used in cosmetic formulations primarily as a dispersing agent and emulsifier, helping to evenly distribute pigments (such as titanium dioxide and zinc oxide in sunscreens) and stabilize oil-based or water-in-oil systems. It improves texture, spreadability, and uniformity rather than providing a direct biological skin benefit. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.