Below is every ingredient in Detan+ Oil Balance Fluid Sunscreen for Oily Skin - 50g explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF.
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection.
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Skin irritation | Rare | Generally well tolerated; mild irritation possible in sensitive individuals. |
| Allergic contact dermatitis | Rare | Uncommon sensitization reactions reported, sometimes linked to benzoate component. |
| Comedogenicity / breakouts | Uncommon | Low comedogenic potential but may contribute to clogged pores in acne-prone skin. |
| Contact urticaria | Very rare | Isolated reports of hive-like reactions tied to benzoate moiety. |
| Skin irritation or mild contact dermatitis | Rare | Occasional reports of localized redness or irritation, generally mild. |
| Allergic contact dermatitis / sensitization | Very rare | Isolated case reports; considered a low-sensitizing UV filter. |
| Photoallergic reaction | Very rare | Uncommon given its photostability, but possible in sensitive individuals. |
| Contact irritation | Rare | Mild redness or stinging occasionally reported, generally well tolerated. |
| Mild skin irritation | Uncommon | Transient stinging or redness, more likely on compromised or sensitive skin. |
| Enhanced penetration of co-formulated irritants | Uncommon | As a penetration enhancer it may increase absorption and irritation potential of other actives. |
| Contact dermatitis / skin irritation | Rare | Occasional reports of mild irritation or redness in sensitive individuals. |
| Stinging or eye irritation | Rare | May occur if product migrates into the eyes, generally formulation-related. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| C12-15 Alkyl Benzoate Emollient / texture enhancer | C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active. |
| Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active UVA filter (sunscreen) | Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens. |
| Ethylhexyl Triazone Key active UVB sunscreen filter | Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine Key active UV filter (sunscreen) | Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection. |
| Lecithin Emollient / Emulsifier | Lecithin is a naturally occurring phospholipid (commonly derived from soybean or egg) used in skincare as an emulsifier, emollient, and penetration enhancer. It helps stabilize oil-and-water formulations and supports the skin barrier by mimicking natural lipids. |
| Phenethyl Alcohol Preservative / fragrance | Phenethyl alcohol is an aromatic alcohol used in cosmetics primarily as a preservative and antimicrobial agent, and sometimes as a fragrance component with a mild rose-like scent. It is often combined with other preservatives to broaden antimicrobial coverage. |
| Hydroxyacetophenone Antioxidant / soothing agent | Hydroxyacetophenone (acetophenone-based compound, often 4'-hydroxyacetophenone) is used in skincare primarily as an antioxidant and skin-conditioning agent that can also enhance the stability and efficacy of preservative systems. It is valued for its soothing properties and helps neutralize free radicals while reducing potential irritation from other formulation components. |
| Ethylhexyl Methoxycinnamate Key active UV filter (UVB sunscreen) | Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Titanium Dioxide Key active UV filter / mineral sunscreen | Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Hyaluronic Acid Key active Humectant / hydrating agent | Hyaluronic acid is a glycosaminoglycan that attracts and binds water to the skin, helping to maintain hydration and improve the appearance of plumpness and smoothness. It is widely used in moisturizers and serums and is generally well tolerated across skin types. |
| Betaine Humectant / osmolyte | Betaine is a naturally derived amino acid derivative (trimethylglycine) used in skincare as a humectant and osmoprotectant that attracts and retains moisture while helping stabilize skin barrier function. It also improves the texture and mildness of formulations. |
| Glyceryl Glucoside Key active Humectant / moisturizer | Glyceryl glucoside is a naturally occurring sugar-glycerol compound used in skincare as a humectant that attracts and binds water to the skin. It is also studied for its ability to stimulate aquaporin water-channel expression, supporting skin hydration and barrier function. |
| Solanum Lycopersicum Fruit Extract Key active Antioxidant / skin conditioning | Solanum Lycopersicum (tomato) Fruit Extract is a botanical ingredient rich in carotenoids such as lycopene, vitamins, and polyphenols. It is used in skincare for its antioxidant, soothing, and skin-conditioning properties, helping protect against oxidative and environmental stress. |
| D-Panthenol Humectant / skin-conditioning agent | D-Panthenol (provitamin B5) is converted to pantothenic acid in the skin and acts as a humectant and emollient, helping retain moisture and support barrier repair. It is commonly included in skincare for its hydrating and soothing properties. |
| Dicaprylyl Carbonate Emollient / texture enhancer | Dicaprylyl Carbonate is a lightweight, non-greasy emollient derived from coconut-based fatty alcohols and carbonic acid, used to improve skin feel and spreadability in cosmetic formulations. It also acts as a solvent and helps distribute pigments and other ingredients evenly. |
| Aloe Barbadensis Leaf Extract Soothing/moisturizing agent | Aloe Barbadensis Leaf Extract is derived from the aloe vera plant and is used in skincare for its hydrating, soothing, and mild anti-inflammatory properties. It is commonly included as a supportive base ingredient rather than a primary treatment active. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Polyacrylate-13 Rheology modifier / thickener | Polyacrylate-13 is a synthetic acrylate copolymer used as a thickening, stabilizing, and emulsifying agent in cosmetic formulations. It helps create stable gels and emulsions and improves product texture without contributing to active treatment effects. |
| Polyisobutene Emollient/film-former | Polyisobutene is a synthetic hydrocarbon polymer used in cosmetics as an emollient, thickener, and film-forming agent that imparts smooth texture, adhesion, and improved spreadability. It is commonly found in long-wear makeup, lip products, and sunscreens to enhance water resistance and product longevity. |
| Polysorbate 20 Emulsifier / solubilizer | Polysorbate 20 is a nonionic surfactant derived from sorbitol and lauric acid, used in skincare to solubilize fragrances and essential oils and to stabilize oil-in-water emulsions. It functions primarily as a formulation aid rather than a treatment active. |
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| C13-15 Alkane Emollient / solvent | C13-15 Alkane is a lightweight, plant-derived (often sugarcane-based) liquid hydrocarbon used as an emollient and spreading agent in skincare. It softens skin, improves product texture, and serves as a sustainable alternative to silicones and mineral oil. |
| Dimethicone/Vinyl Dimethicone Crosspolymer Silicone elastomer / texture enhancer | Dimethicone Vinyl Dimethicone Crosspolymer is a crosslinked silicone elastomer used in skincare and cosmetics to impart a silky, smooth feel, absorb excess oil, blur the appearance of pores and fine lines, and improve product spreadability. It functions as a formulation/sensory agent rather than a biologically active treatment ingredient. |
| PEG-10 Dimethicone Silicone-based emulsifier/conditioning agent | PEG-10 Dimethicone is a water-dispersible, PEG-modified silicone used in cosmetics as an emulsifier, surfactant, and skin-conditioning agent that imparts a smooth, silky feel and helps stabilize emulsions. It is considered a formulation/base ingredient rather than a therapeutic active. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.