Below is every ingredient in Hydrate+ Jello Moisturizer 100g explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Glyceryl glucoside is a naturally occurring sugar-glycerol compound used in skincare as a humectant that attracts and binds water to the skin. It is also studied for its ability to stimulate aquaporin water-channel expression, supporting skin hydration and barrier function.
Avena Strigosa Seed Extract is derived from black oat seeds and is used in cosmetic formulations for its skin-conditioning, moisturizing, and soothing properties, attributed to compounds such as polysaccharides, beta-glucans, and antioxidants. It is commonly included to help support the skin barrier and improve hydration.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin dryness or barrier disruption with excessive contact | Uncommon | Frequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss. |
| Irritation from impurities or hard water minerals | Rare | Reactions are attributed to contaminants, chlorine, or mineral content rather than water itself. |
| Mild transient stinging or tingling | Uncommon | More likely on compromised or freshly exfoliated skin |
| Skin irritation or redness | Rare | Generally well tolerated at typical use concentrations |
| Allergic contact dermatitis | Very rare | Isolated sensitivity reactions reported |
| Mild transient stinging or irritation | Uncommon | More likely on broken or compromised skin or at high concentrations. |
| Redness or itching | Rare | Typically resolves after discontinuation. |
| Comedogenicity / clogged pores | Rare | Generally considered low risk, but occlusive films may contribute to congestion in very acne-prone skin. |
| Contact irritation | Very rare | Considered inert and non-irritating; isolated reports only. |
| Mild skin dryness | Uncommon | Due to oil-absorbing properties, particularly in high concentrations or on already dry skin. |
| Skin irritation or sensitivity | Rare | Occasional mild irritation reported, more likely with compromised skin barrier. |
| Respiratory irritation from inhalation of loose powder | Rare | Relevant mainly to powdered formulations; crystalline silica inhalation is a concern, but cosmetic-grade amorphous silica poses minimal risk. |
| Mild skin irritation | Rare | Occasional reports, generally well tolerated on intact skin. |
| Contact allergy/sensitization | Very rare | Polymeric structure makes sensitization uncommon; isolated case reports only. |
| Transient stinging on sensitive skin | Very rare | Usually related to overall formulation rather than the polymer itself. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| Hydroxyethyl Urea Humectant / moisturizer | Hydroxyethyl Urea is a water-soluble humectant derived from urea that attracts and binds moisture to the skin, helping improve hydration and softness. It is commonly used in moisturizers and leave-on formulations as a gentle alternative to urea. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Hydrogenated Polyisobutene Emollient / occlusive | Hydrogenated Polyisobutene is a synthetic hydrocarbon emollient that imparts a smooth, non-greasy slip and forms an occlusive film to reduce transepidermal water loss. It is widely used as a lightweight alternative to mineral oil in moisturizers, lip products, and color cosmetics. |
| Silica Absorbent/texturizer | Silica is a mineral-derived ingredient (silicon dioxide) used in cosmetics to absorb oil and sebum, improve texture, and act as a bulking, anti-caking, or matting agent. It is generally inert and well tolerated on skin. |
| Ammonium Acryloyldimethyltaurate/VP Copolymer Thickener/stabilizer | Ammonium Acryloyldimethyltaurate/VP Copolymer is a synthetic acrylic copolymer used in skincare to thicken, gel, and stabilize emulsions, providing viscosity control and a smooth texture. It functions as a rheology modifier and film former rather than a biologically active treatment ingredient. |
| Saccharide Isomerate Humectant / moisturizer | Saccharide Isomerate is a plant-derived carbohydrate complex that binds to the skin's keratin to provide long-lasting hydration and improve moisture retention. It is structurally similar to carbohydrates naturally found in the skin's upper layers. |
| Citric Acid pH adjuster / AHA exfoliant | Citric acid is an alpha-hydroxy acid derived from citrus fruits, used primarily to adjust and buffer formulation pH and as a chelating agent, and at higher concentrations as a mild chemical exfoliant. It can promote surface cell turnover and is sometimes included in antioxidant or brightening products. |
| Sodium Citrate pH adjuster / chelating agent | Sodium citrate is the sodium salt of citric acid used in skincare primarily as a buffering agent to stabilize formulation pH and as a chelator that binds metal ions to improve product stability. It is a base/formulation ingredient rather than a therapeutic active. |
| Cetearyl Olivate Emulsifier / emollient | Cetearyl Olivate is an olive oil-derived emulsifier and emollient, typically used with Sorbitan Olivate, that helps blend oil and water phases while conditioning and softening the skin. It supports the skin barrier and gives formulations a light, non-greasy feel. |
| Sorbitan Olivate Emulsifier | Sorbitan Olivate is an olive-derived ester of sorbitol and olive oil fatty acids used as a non-ionic emulsifier and emollient. It is often paired with Cetearyl Olivate (as Olivem 1000) to stabilize oil-in-water emulsions and impart a soft skin feel. |
| Glyceryl Glucoside Key active Humectant / moisturizer | Glyceryl glucoside is a naturally occurring sugar-glycerol compound used in skincare as a humectant that attracts and binds water to the skin. It is also studied for its ability to stimulate aquaporin water-channel expression, supporting skin hydration and barrier function. |
| Aloe Barbadensis Leaf Juice Soothing/humectant | Aloe Barbadensis Leaf Juice is a plant-derived ingredient used in skincare for its hydrating, soothing, and emollient properties, often included to calm irritation and improve skin moisture. It functions primarily as a base/conditioning agent rather than a targeted treatment active. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Avena Strigosa Seed Extract Key active Skin-conditioning/soothing agent | Avena Strigosa Seed Extract is derived from black oat seeds and is used in cosmetic formulations for its skin-conditioning, moisturizing, and soothing properties, attributed to compounds such as polysaccharides, beta-glucans, and antioxidants. It is commonly included to help support the skin barrier and improve hydration. |
| Lecithin Emollient / Emulsifier | Lecithin is a naturally occurring phospholipid (commonly derived from soybean or egg) used in skincare as an emulsifier, emollient, and penetration enhancer. It helps stabilize oil-and-water formulations and supports the skin barrier by mimicking natural lipids. |
| Potassium Sorbate Preservative | Potassium sorbate is the potassium salt of sorbic acid, used as a mild preservative to inhibit mold, yeast, and some bacterial growth in cosmetic formulations. It is most effective at acidic pH and is often combined with other preservatives for broad-spectrum protection. |
| Aphanothece Sacrum Polysaccharide Humectant/Moisturizer | Aphanothece Sacrum Polysaccharide (often marketed as Sacran) is a high-molecular-weight sulfated polysaccharide derived from the freshwater cyanobacterium Aphanothece sacrum. It is used in skincare for its strong water-binding and film-forming properties, providing hydration and a protective barrier on the skin surface. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Cocos Nucifera Water Skin-conditioning humectant | Cocos Nucifera (coconut) Water is the clear liquid from young coconuts, used in skincare as a hydrating, skin-conditioning agent that supplies water, electrolytes, sugars, and trace amino acids. It functions mainly as a humectant and soothing vehicle rather than an active treatment ingredient. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Sodium Acrylates Copolymer Thickener / film-forming stabilizer | Sodium Acrylates Copolymer is a synthetic anionic polymer used to thicken, stabilize, and improve the texture of cosmetic formulations, often forming a smooth film on the skin. It functions primarily as a rheology modifier and emulsion stabilizer rather than a treatment active. |
| Parfum Fragrance | Parfum (fragrance) is a blend of aromatic compounds added to cosmetic products to impart a pleasant scent or mask the base odor of other ingredients. It serves a sensory/formulation purpose rather than providing any skin benefit. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.