Below is every ingredient in Mood Enhancing Sunscreen SPF 50 PA++++ - 2 x 50ml explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
B Block is a combination cosmetic ingredient marketed as a broad-spectrum UV and infrared/visible-light protective system, typically blending organic and/or mineral filters with antioxidants. It is used in sunscreens and daytime moisturizers to reduce UV-induced skin damage.
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Benzophenone-3 (oxybenzone) is a broad-spectrum chemical UV filter that absorbs both UVB and short UVA radiation, commonly used in sunscreens and as a photostabilizer in cosmetic formulations. It also helps protect product integrity by preventing UV degradation of other ingredients.
Tocopheryl acetate is a stable, esterified form of vitamin E commonly used in skincare as an antioxidant and emollient. It is converted to active tocopherol in the skin and helps protect against oxidative stress while supporting the skin barrier.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| No reported side effects (no data available) | Very rare | Because this is not a recognized ingredient, there is no research literature describing adverse reactions or safety profiles. |
| Mild transient stinging or skin irritation | Uncommon | Often related to organic UV filters or other formulation components; usually self-limiting. |
| Contact dermatitis / allergic sensitization | Rare | Some organic UV filters can act as allergens or photoallergens in susceptible individuals. |
| Eye irritation or watering | Uncommon | Occurs if product migrates into the eyes, particularly with sweating. |
| Acneiform breakouts or follicular occlusion | Rare | More likely in oily/acne-prone skin with heavier emollient bases. |
| White cast or cosmetic residue | Common | A cosmetic rather than medical effect, mainly when mineral filters are included. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Mild skin irritation | Uncommon | Transient stinging or redness, more likely on compromised or sensitive skin. |
| Allergic contact dermatitis | Rare | Sensitization is infrequent; propanediol is generally considered low-risk for allergy. |
| Enhanced penetration of co-formulated irritants | Uncommon | As a penetration enhancer it may increase absorption and irritation potential of other actives. |
| Contact irritation or mild stinging | Uncommon | Transient skin irritation, especially on sensitive or compromised skin. |
| Photoallergic contact dermatitis | Rare | Reaction triggered by combined exposure to the ingredient and sunlight. |
| Potential endocrine/estrogenic activity | Very rare | Suggested by in vitro and animal studies; human relevance at cosmetic exposure levels remains uncertain. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| First Floor Unknown / not a recognized skincare ingredient | "First Floor" is not a known dermatological or cosmetic-chemistry ingredient and does not correspond to any documented topical compound in scientific or regulatory literature. No verifiable data on its function, safety, or activity exists. |
| Udyog Vihar Phase 3 N/A — not a skincare ingredient | "Udyog Vihar Phase 3" is not a dermatological or cosmetic-chemistry ingredient; it is an industrial area/locality in Gurugram, Haryana, India. There is no established skincare function, summary, or safety data associated with it as a topical ingredient. |
| Sector 20 Unknown/unrecognized ingredient | "Sector 20" is not a recognized skincare ingredient or established INCI-listed cosmetic component, and no dermatological or cosmetic-chemistry data exists for it. The name does not correspond to any documented active or formulation agent. |
| Gurugram Not a skincare ingredient | "Gurugram" is not a recognized cosmetic or dermatological ingredient; it is the name of a city in Haryana, India (formerly Gurgaon). No data exists for it as a skincare active or formulation component. |
| Sector 64 Rd Unknown / not a recognized skincare ingredient | "Sector 64 Rd" does not correspond to any known cosmetic or dermatological ingredient; it appears to be a street address or location name rather than a skincare compound. No function, formulation role, or safety data exists for it in cosmetic chemistry references. |
| B Block Key active UV-filter blend / photoprotective active | B Block is a combination cosmetic ingredient marketed as a broad-spectrum UV and infrared/visible-light protective system, typically blending organic and/or mineral filters with antioxidants. It is used in sunscreens and daytime moisturizers to reduce UV-induced skin damage. |
| Sector 63 Unknown/unverified ingredient | "Sector 63" is not a recognized skincare ingredient in dermatological or cosmetic-chemistry literature; it does not appear in standard ingredient databases such as INCI, CosIng, or peer-reviewed research. No verifiable function, mechanism, or safety data can be attributed to it. |
| Noida Unknown / not a recognized skincare ingredient | "Noida" is not a recognized dermatological or cosmetic-chemistry skincare ingredient; it is the name of a city in India (a planned urban area near Delhi). No INCI listing, established function, or peer-reviewed safety data exists for it as a topical ingredient. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Ethylhexyl Methoxycinnamate Key active UV filter (UVB sunscreen) | Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims. |
| Butyl Methoxydibenzoylmethane Key active UV filter (UVA sunscreen) | Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Betaine Humectant / osmolyte | Betaine is a naturally derived amino acid derivative (trimethylglycine) used in skincare as a humectant and osmoprotectant that attracts and retains moisture while helping stabilize skin barrier function. It also improves the texture and mildness of formulations. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Benzophenone-3 Key active UV filter (sunscreen agent) | Benzophenone-3 (oxybenzone) is a broad-spectrum chemical UV filter that absorbs both UVB and short UVA radiation, commonly used in sunscreens and as a photostabilizer in cosmetic formulations. It also helps protect product integrity by preventing UV degradation of other ingredients. |
| Lecithin Emollient / Emulsifier | Lecithin is a naturally occurring phospholipid (commonly derived from soybean or egg) used in skincare as an emulsifier, emollient, and penetration enhancer. It helps stabilize oil-and-water formulations and supports the skin barrier by mimicking natural lipids. |
| Sodium Acrylates Copolymer Thickener / film-forming stabilizer | Sodium Acrylates Copolymer is a synthetic anionic polymer used to thicken, stabilize, and improve the texture of cosmetic formulations, often forming a smooth film on the skin. It functions primarily as a rheology modifier and emulsion stabilizer rather than a treatment active. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Phospholipids Emollient / skin-conditioning agent and liposome-forming emulsifier | Phospholipids are amphiphilic lipids (commonly derived from soy or egg lecithin) used in skincare to form liposomes, stabilize emulsions, and reinforce the skin barrier. They also enhance penetration and delivery of other actives. |
| Fragrance Fragrance/masking agent | Fragrance refers to a blend of natural or synthetic aromatic compounds added to skincare products to impart a pleasant scent or mask the odor of other ingredients. It serves a sensory and formulation purpose rather than a therapeutic one. |
| Sea Water Skin-conditioning agent / mineral-rich solvent | Sea water is a naturally sourced ingredient containing minerals such as magnesium, calcium, potassium, and sodium, used in skincare for its hydrating and skin-conditioning properties. It is generally used as a functional base or conditioning component rather than a targeted treatment active. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Ethylhexylglycerine Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional ingredient used primarily as a preservative enhancer and deodorizing agent in cosmetic formulations, and also provides mild skin-conditioning and humectant-like properties. It is widely used to support the efficacy of other preservatives, allowing lower overall preservative concentrations. |
| Xylitol Humectant / moisturizer | Xylitol is a sugar alcohol used in topical formulations as a humectant that helps attract and retain moisture in the skin, and it may support the skin's microbiome and barrier function. It is generally well tolerated and considered safe for topical use. |
| Pentylene Glycol Humectant / solvent / preservative-booster | Pentylene glycol is a glycol used in cosmetics as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, helping reduce reliance on traditional preservatives. It improves skin hydration and aids the delivery and stability of other ingredients. |
| Tocopheryl Acetate (Vitamin E) Key active Antioxidant / skin conditioning | Tocopheryl acetate is a stable, esterified form of vitamin E commonly used in skincare as an antioxidant and emollient. It is converted to active tocopherol in the skin and helps protect against oxidative stress while supporting the skin barrier. |
| Bifida Ferment Lysate Key active Probiotic-derived skin conditioning agent | Bifida Ferment Lysate is a lysate of fermented Bifidobacterium cultures used in skincare for its skin-conditioning, soothing, and barrier-supporting properties. It is studied for improving skin hydration, resilience, and protection against environmental stressors such as UV-induced damage. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Trehalose Humectant / moisturizer | Trehalose is a naturally occurring disaccharide used in skincare as a humectant and protective agent, helping retain moisture and stabilize cell membranes and proteins against dehydration and oxidative stress. It is well tolerated and commonly used to support skin barrier hydration. |
| Sodium Gluconate Chelating agent / skin-conditioning | Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Citric Acid pH adjuster / AHA exfoliant | Citric acid is an alpha-hydroxy acid derived from citrus fruits, used primarily to adjust and buffer formulation pH and as a chelating agent, and at higher concentrations as a mild chemical exfoliant. It can promote surface cell turnover and is sometimes included in antioxidant or brightening products. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Urea Key active Humectant / keratolytic | Urea is a naturally occurring component of the skin's natural moisturizing factor that hydrates by attracting and retaining water; at higher concentrations it also softens and exfoliates thickened or scaly skin. It is widely used to treat dry skin conditions such as xerosis, ichthyosis, and hyperkeratosis. |
| Sodium Pyrrolidone Carboxylic Acid Humectant / NMF component | Sodium PCA (sodium pyrrolidone carboxylic acid) is the salt of pyroglutamic acid and a natural moisturizing factor (NMF) found in skin. It is a highly effective humectant that attracts and binds water to the stratum corneum, improving hydration and softness. |
| Caprylyl Glycol Humectant / skin-conditioning agent and preservative booster | Caprylyl glycol is a multifunctional emollient and humectant derived from caprylic acid that helps hydrate skin and enhance the efficacy of preservatives in formulations. It is widely used as a stabilizing and conditioning base ingredient rather than a therapeutic active. |
| Glucose Humectant/skin-conditioning agent | Glucose is a simple sugar used in skincare primarily as a humectant and skin-conditioning ingredient, helping to attract and retain moisture in the skin. It can also serve as a substrate in formulations and contributes to the skin's natural moisturizing factors. |
| Sodium Lactate Humectant / NMF component | Sodium lactate is the sodium salt of lactic acid and a key component of skin's natural moisturizing factor (NMF), used to hydrate the skin and buffer formulation pH. It also has mild exfoliating and humectant properties that help maintain skin moisture and barrier function. |
| Fructose Humectant | Fructose is a simple monosaccharide sugar used in skincare primarily as a humectant that attracts and binds water to help maintain skin hydration. It is generally considered a supporting/base ingredient rather than a therapeutic active. |
| Maltose Humectant / skin-conditioning agent | Maltose is a disaccharide sugar used in skincare primarily as a humectant and skin-conditioning agent, helping to attract and retain moisture in the stratum corneum. It is generally considered a low-risk, well-tolerated formulation ingredient rather than a therapeutic active. |
| Sodium Chloride Thickener / viscosity adjuster | Sodium chloride (table salt) is commonly used in cosmetics as a thickening and viscosity-control agent, particularly in surfactant-based cleansers, and also acts as a mild abrasive in scrubs. It is generally well tolerated and considered a formulation ingredient rather than a treatment active. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.