Below is every ingredient in Salicylic Acid Anti Acne Face Wash - 2 x explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
B Block is a combination cosmetic ingredient marketed as a broad-spectrum UV and infrared/visible-light protective system, typically blending organic and/or mineral filters with antioxidants. It is used in sunscreens and daytime moisturizers to reduce UV-induced skin damage.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Salicylic acid is a lipid-soluble beta-hydroxy acid that exfoliates the skin surface and penetrates sebaceous pores to loosen and dissolve keratin and debris. It is widely used to treat acne, blackheads, and conditions involving thickened or scaly skin.
Ananas Sativus (Pineapple) Fruit Extract is derived from pineapple fruit and contains the proteolytic enzyme bromelain along with vitamin C and fruit acids. It is used in skincare for gentle enzymatic exfoliation, brightening, and antioxidant support.
Salix Alba (Willow) Bark Extract is derived from white willow bark and contains salicin, a precursor to salicylic acid, valued for its mild keratolytic, exfoliating, and soothing properties. It is often used as a gentler, naturally derived alternative to synthetic salicylic acid in skincare formulations.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| No reported side effects (no data available) | Very rare | Because this is not a recognized ingredient, there is no research literature describing adverse reactions or safety profiles. |
| Mild transient stinging or skin irritation | Uncommon | Often related to organic UV filters or other formulation components; usually self-limiting. |
| Contact dermatitis / allergic sensitization | Rare | Some organic UV filters can act as allergens or photoallergens in susceptible individuals. |
| Eye irritation or watering | Uncommon | Occurs if product migrates into the eyes, particularly with sweating. |
| Acneiform breakouts or follicular occlusion | Rare | More likely in oily/acne-prone skin with heavier emollient bases. |
| White cast or cosmetic residue | Common | A cosmetic rather than medical effect, mainly when mineral filters are included. |
| Skin dryness | Common | Can strip natural lipids with frequent or prolonged use, especially in higher concentrations. |
| Skin and scalp irritation | Common | Mild to moderate irritation possible, particularly on sensitive or compromised skin. |
| Eye irritation/stinging | Common | Reported in patch and use tests; concentration-dependent. |
| Allergic contact dermatitis | Rare | Sensitization is uncommon but has been reported. |
| Mild skin irritation | Rare | Occasional transient redness or stinging, typically in sensitive individuals or with high concentrations. |
| Contact dermatitis / allergic reaction | Very rare | Allergic sensitization is uncommon; reactions may relate to residual monomers or other formulation components. |
| Temporary tightness or dryness | Uncommon | Film-forming effect can produce a sensation of skin tightness in some users. |
| Skin irritation | Uncommon | Generally well tolerated, but mild irritation can occur, particularly with high concentrations or compromised skin barrier. |
| Eye irritation | Uncommon | May cause stinging or irritation on direct eye contact, relevant in cleanser and shampoo formulations. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| First Floor Unknown / not a recognized skincare ingredient | "First Floor" is not a known dermatological or cosmetic-chemistry ingredient and does not correspond to any documented topical compound in scientific or regulatory literature. No verifiable data on its function, safety, or activity exists. |
| Udyog Vihar Phase 3 N/A — not a skincare ingredient | "Udyog Vihar Phase 3" is not a dermatological or cosmetic-chemistry ingredient; it is an industrial area/locality in Gurugram, Haryana, India. There is no established skincare function, summary, or safety data associated with it as a topical ingredient. |
| Sector 20 Unknown/unrecognized ingredient | "Sector 20" is not a recognized skincare ingredient or established INCI-listed cosmetic component, and no dermatological or cosmetic-chemistry data exists for it. The name does not correspond to any documented active or formulation agent. |
| Gurugram Not a skincare ingredient | "Gurugram" is not a recognized cosmetic or dermatological ingredient; it is the name of a city in Haryana, India (formerly Gurgaon). No data exists for it as a skincare active or formulation component. |
| Sector 64 Rd Unknown / not a recognized skincare ingredient | "Sector 64 Rd" does not correspond to any known cosmetic or dermatological ingredient; it appears to be a street address or location name rather than a skincare compound. No function, formulation role, or safety data exists for it in cosmetic chemistry references. |
| B Block Key active UV-filter blend / photoprotective active | B Block is a combination cosmetic ingredient marketed as a broad-spectrum UV and infrared/visible-light protective system, typically blending organic and/or mineral filters with antioxidants. It is used in sunscreens and daytime moisturizers to reduce UV-induced skin damage. |
| Sector 63 Unknown/unverified ingredient | "Sector 63" is not a recognized skincare ingredient in dermatological or cosmetic-chemistry literature; it does not appear in standard ingredient databases such as INCI, CosIng, or peer-reviewed research. No verifiable function, mechanism, or safety data can be attributed to it. |
| Noida Unknown / not a recognized skincare ingredient | "Noida" is not a recognized dermatological or cosmetic-chemistry skincare ingredient; it is the name of a city in India (a planned urban area near Delhi). No INCI listing, established function, or peer-reviewed safety data exists for it as a topical ingredient. |
| Sodium C14-16 Alpha Olefin Sulfonate Surfactant/cleansing agent | Sodium C14-16 Alpha Olefin Sulfonate is an anionic surfactant used as a primary cleansing and foaming agent in shampoos, body washes, and other rinse-off cleansers. It produces high foam and effectively removes oil and dirt. |
| Sodium Acrylates Copolymer Thickener / film-forming stabilizer | Sodium Acrylates Copolymer is a synthetic anionic polymer used to thicken, stabilize, and improve the texture of cosmetic formulations, often forming a smooth film on the skin. It functions primarily as a rheology modifier and emulsion stabilizer rather than a treatment active. |
| Decyl Glucoside Surfactant/Cleanser | Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants. |
| Sodium Lauroyl Sarcosinate Surfactant / cleansing agent | Sodium Lauroyl Sarcosinate is an amino acid-derived anionic surfactant used in cleansers, shampoos and toothpastes to provide gentle foaming and cleansing. It is generally considered milder than traditional sulfate surfactants. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Cocamidopropyl Betaine Surfactant / foaming cleanser | Cocamidopropyl Betaine is an amphoteric surfactant derived from coconut oil and dimethylaminopropylamine, used in cleansers, shampoos, and body washes to provide gentle foaming, viscosity, and to reduce the harshness of stronger anionic surfactants. It is widely regarded as mild but is a recognized contact allergen. |
| PEG-7 Glyceryl Cocoate Emollient/surfactant | PEG-7 Glyceryl Cocoate is a polyethylene glycol derivative of glyceryl cocoate used as a mild nonionic surfactant, emollient, and emulsifier in cleansers and skincare formulations. It improves spreadability and helps solubilize oils while providing a gentle skin-conditioning effect. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Polyquaternium-7 Conditioning/film-forming polymer | Polyquaternium-7 is a cationic synthetic copolymer used in skincare and hair care as a conditioning agent and film former, imparting smoothness, reducing static, and enhancing sensory feel. It is a formulation ingredient rather than a therapeutic active. |
| Fragrance Fragrance/masking agent | Fragrance refers to a blend of natural or synthetic aromatic compounds added to skincare products to impart a pleasant scent or mask the odor of other ingredients. It serves a sensory and formulation purpose rather than a therapeutic one. |
| Sodium Chloride Thickener / viscosity adjuster | Sodium chloride (table salt) is commonly used in cosmetics as a thickening and viscosity-control agent, particularly in surfactant-based cleansers, and also acts as a mild abrasive in scrubs. It is generally well tolerated and considered a formulation ingredient rather than a treatment active. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Salicylic Acid Key active Beta-hydroxy acid (BHA) exfoliant / keratolytic | Salicylic acid is a lipid-soluble beta-hydroxy acid that exfoliates the skin surface and penetrates sebaceous pores to loosen and dissolve keratin and debris. It is widely used to treat acne, blackheads, and conditions involving thickened or scaly skin. |
| Aloe Barbadensis (Aloe Vera) Extract Soothing/humectant | Aloe Barbadensis extract is a plant-derived gel rich in polysaccharides, amino acids, and vitamins used to hydrate, soothe, and support skin barrier repair. It is commonly added to formulations for its moisturizing and mildly anti-inflammatory properties. |
| Ananas Sativus (Pineapple) Fruit Extract Key active Exfoliant / antioxidant | Ananas Sativus (Pineapple) Fruit Extract is derived from pineapple fruit and contains the proteolytic enzyme bromelain along with vitamin C and fruit acids. It is used in skincare for gentle enzymatic exfoliation, brightening, and antioxidant support. |
| Salix Alba (Willow) Bark Extract Key active Exfoliant / anti-inflammatory | Salix Alba (Willow) Bark Extract is derived from white willow bark and contains salicin, a precursor to salicylic acid, valued for its mild keratolytic, exfoliating, and soothing properties. It is often used as a gentler, naturally derived alternative to synthetic salicylic acid in skincare formulations. |
| Sodium Gluconate Chelating agent / skin-conditioning | Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment. |
| Methylchloroisothiazolinone Preservative | Methylchloroisothiazolinone (MCI) is a synthetic isothiazolinone preservative used at very low concentrations to prevent microbial growth in cosmetics and personal care products, often combined with methylisothiazolinone. It is typically restricted to rinse-off products due to its sensitizing potential. |
| Methylisothiazolinone Preservative | Methylisothiazolinone (MI) is a synthetic isothiazolinone preservative used in cosmetics and personal care products to prevent microbial growth. It is effective at low concentrations but is recognized as a significant contact allergen. |
| Sodium Benzoate Preservative | Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5. |
| Colour Colorant | Colour additives are pigments or dyes added to cosmetic and skincare formulations to impart or modify product appearance. They serve an aesthetic, non-therapeutic role and do not affect skin physiology. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.