Below is every ingredient in Minimalist B12 + Repair Complex 5.5% Face Moisturizer 10g explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Cyanocobalamin is a synthetic form of vitamin B12 occasionally included in topical skincare formulations, where it may serve as a coloring agent (imparting a pink-red hue) or as a conditioning additive. Some research has explored topical B12 for inflammatory skin conditions such as atopic dermatitis.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin dryness or barrier disruption with excessive contact | Uncommon | Frequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss. |
| Irritation from impurities or hard water minerals | Rare | Reactions are attributed to contaminants, chlorine, or mineral content rather than water itself. |
| Mild skin irritation | Rare | Generally considered non-irritating; occasional mild reactions reported. |
| Contact allergy/sensitization | Very rare | Silicones are low-allergenicity; documented allergic reactions are exceptional. |
| Eye irritation | Rare | Possible transient stinging if product enters the eyes. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Allergic contact dermatitis | Rare | Sensitization has been documented in case reports and patch-test studies, typically presenting as localized redness or eczema. |
| Mild irritation or stinging | Rare | Transient irritation may occur, more often on compromised or sensitive skin. |
| Contact urticaria | Very rare | Isolated reports of immediate hives following topical exposure. |
| Comedogenicity / clogged pores | Rare | Generally considered low risk, but occlusive films may contribute to congestion in very acne-prone skin. |
| Contact irritation | Very rare | Considered inert and non-irritating; isolated reports only. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| Cyclopentasiloxane Emollient/silicone | Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Panthenol Humectant / skin-conditioning agent | Panthenol (provitamin B5) is converted to pantothenic acid in the skin, where it acts as a humectant and helps support skin barrier function and hydration. It is also used for its soothing and mild anti-inflammatory properties in topical formulations. |
| Hydrogenated Polyisobutene Emollient / occlusive | Hydrogenated Polyisobutene is a synthetic hydrocarbon emollient that imparts a smooth, non-greasy slip and forms an occlusive film to reduce transepidermal water loss. It is widely used as a lightweight alternative to mineral oil in moisturizers, lip products, and color cosmetics. |
| PEG/PPG-18/18 Dimethicone Silicone-based emulsifier/conditioning agent | PEG/PPG-18/18 Dimethicone is a water-dispersible silicone surfactant used to emulsify, stabilize, and impart a smooth, silky feel to skincare and cosmetic formulations. It functions primarily as an emulsifier and skin-conditioning agent rather than a therapeutic active. |
| Betaine Humectant / osmolyte | Betaine is a naturally derived amino acid derivative (trimethylglycine) used in skincare as a humectant and osmoprotectant that attracts and retains moisture while helping stabilize skin barrier function. It also improves the texture and mildness of formulations. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Cyanocobalamin Key active Vitamin (B12) additive/colorant | Cyanocobalamin is a synthetic form of vitamin B12 occasionally included in topical skincare formulations, where it may serve as a coloring agent (imparting a pink-red hue) or as a conditioning additive. Some research has explored topical B12 for inflammatory skin conditions such as atopic dermatitis. |
| Ceramide NP Skin-barrier replenishing lipid / emollient | Ceramide NP (formerly ceramide 3) is a naturally occurring sphingolipid that helps restore and maintain the skin's lipid barrier, reducing transepidermal water loss and improving hydration. It is widely used in moisturizers and barrier-repair formulations. |
| Dipropylene Glycol Solvent/humectant | Dipropylene glycol is a clear, low-viscosity glycol used in cosmetics primarily as a solvent, humectant, and viscosity-reducing agent. It helps dissolve fragrances and other ingredients while contributing mild moisture-retention properties. |
| Hydrogenated Lecithin Emollient / Emulsifier | Hydrogenated lecithin is a phospholipid derived from lecithin through hydrogenation, used in skincare as an emulsifier, emollient, and skin-conditioning agent. It also helps stabilize formulations and form liposomes that can aid delivery of other ingredients. |
| Glyceryl Stearate Emulsifier/emollient | Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active. |
| Ceramide NS Skin-barrier lipid / emollient | Ceramide NS (formerly Ceramide 2) is a naturally occurring sphingolipid that helps restore and maintain the skin's lipid barrier, reducing transepidermal water loss and improving hydration. It is widely used in moisturizers and barrier-repair formulations. |
| Ceramide AS Skin-barrier lipid / emollient | Ceramide AS is a synthetic sphingolipid that mimics naturally occurring skin ceramides, helping restore and reinforce the stratum corneum barrier and reduce transepidermal water loss. It is commonly used in moisturizers and barrier-repair formulations. |
| Ceramide AG Skin barrier lipid / moisturizer | Ceramide AG (ceramide alpha-hydroxy fatty acid linked to a sphingosine base) is a lipid component that mimics naturally occurring skin ceramides, helping to restore and reinforce the skin barrier and reduce transepidermal water loss. It is commonly included in moisturizers and barrier-repair formulations. |
| Cholesterol Skin barrier lipid / emollient | Cholesterol is a naturally occurring lipid found in the skin's stratum corneum that, alongside ceramides and fatty acids, helps maintain the skin barrier and prevent transepidermal water loss. In skincare formulations it functions as an emollient and barrier-repair agent that improves hydration and skin resilience. |
| Carbomer Thickener / gelling agent | Carbomer is a synthetic high-molecular-weight polymer of acrylic acid used to thicken, stabilize, and control the viscosity of gels, creams, and lotions. It functions as a formulation aid rather than a therapeutic active. |
| Ceramide EOP Skin barrier lipid | Ceramide EOP is a long-chain omega-hydroxy ceramide that helps form and maintain the skin's lipid barrier, supporting moisture retention and reducing transepidermal water loss. It is commonly used in moisturizers and barrier-repair formulations. |
| Sucrose Distearate Emulsifier / surfactant | Sucrose Distearate is a sugar-derived nonionic emulsifier and emollient used to stabilize oil-in-water emulsions and improve skin feel in creams and lotions. It is considered a mild, biodegradable formulation ingredient rather than a treatment active. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Pentylene Glycol Humectant / solvent / preservative-booster | Pentylene glycol is a glycol used in cosmetics as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, helping reduce reliance on traditional preservatives. It improves skin hydration and aids the delivery and stability of other ingredients. |
| Dimethicone Crosspolymer Silicone-based texture enhancer/film former | Dimethicone Crosspolymer is a crosslinked silicone polymer used in skincare and cosmetics to provide a smooth, silky feel, absorb excess oil, blur the appearance of pores and fine lines, and improve product spreadability. It functions as a formulation ingredient rather than a therapeutic active. |
| Magnesium Sulfate Heptahydrate Emulsion stabilizer / viscosity modifier | Magnesium Sulfate Heptahydrate (Epsom salt) is a mineral salt used in skincare primarily to stabilize water-in-oil emulsions and adjust the consistency of formulations. It also acts as a mild exfoliant and is used in bath soaks for its osmotic, soothing properties. |
| Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer Emulsifier/stabilizer (thickener) | Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer is a synthetic acrylate-based polymer used to thicken, stabilize, and emulsify cosmetic formulations, creating smooth gel and cream textures. It is widely employed as a rheology modifier and is not a therapeutic active. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.