Below is every ingredient in BIOTIQUE ALOE VERA & RASPBERRY SPF 50 Hydra Gel Indian Sunscreen 100g explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure.
Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF.
Diethylhexyl Butamido Triazone (Iscotrizinol, Uvasorb HEB) is an organic, oil-soluble UVB filter that absorbs ultraviolet radiation primarily in the UVB range, providing photoprotection in sunscreen and daily-care formulations. It is highly photostable and substantive to skin, often combined with other filters for broad-spectrum coverage.
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Allergic contact dermatitis | Uncommon | Sensitization can cause redness, itching, or rash, particularly in individuals allergic to plants in the Liliaceae family. |
| Mild stinging or burning on application | Uncommon | Transient sensation, more likely on broken or sensitive skin. |
| Skin redness or irritation | Rare | Generally mild and self-limiting; may relate to preservatives or anthraquinone content in poorly processed extracts. |
| Delayed wound healing | Very rare | Reported in isolated cases when applied to surgical or deep wounds. |
| Skin irritation | Rare | Mild transient irritation possible, generally related to overall formulation rather than the polymer itself. |
| Eye irritation | Rare | Possible stinging if product accidentally enters the eyes. |
| Mild skin irritation | Uncommon | Transient stinging or redness, more likely on compromised or sensitive skin. |
| Enhanced penetration of co-formulated irritants | Uncommon | As a penetration enhancer it may increase absorption and irritation potential of other actives. |
| Comedogenicity / breakouts | Uncommon | Low comedogenic potential but may contribute to clogged pores in acne-prone skin. |
| Contact urticaria | Very rare | Isolated reports of hive-like reactions tied to benzoate moiety. |
| Skin dryness or barrier disruption with excessive contact | Uncommon | Frequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss. |
| Irritation from impurities or hard water minerals | Rare | Reactions are attributed to contaminants, chlorine, or mineral content rather than water itself. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Aloe Barbadensis Leaf Juice Soothing/humectant | Aloe Barbadensis Leaf Juice is a plant-derived ingredient used in skincare for its hydrating, soothing, and emollient properties, often included to calm irritation and improve skin moisture. It functions primarily as a base/conditioning agent rather than a targeted treatment active. |
| Acrylates/C10-30 Alkyl Acrylate Crosspolymer Rheology modifier / emulsion stabilizer | Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic crosslinked acrylic polymer used to thicken, gel, and stabilize emulsions in skincare and cosmetic formulations. It helps suspend ingredients and provides a smooth, consistent texture without acting as a treatment active. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| C12-15 Alkyl Benzoate Emollient / texture enhancer | C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active. |
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| Ethylhexyl Methoxycinnamate Key active UV filter (UVB sunscreen) | Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims. |
| Butyl Methoxydibenzoylmethane Key active UV filter (UVA sunscreen) | Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure. |
| Octocrylene Key active UV filter | Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Lecithin Emollient / Emulsifier | Lecithin is a naturally occurring phospholipid (commonly derived from soybean or egg) used in skincare as an emulsifier, emollient, and penetration enhancer. It helps stabilize oil-and-water formulations and supports the skin barrier by mimicking natural lipids. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Rubus Idaeus Seed Oil Emollient / antioxidant | Rubus Idaeus (raspberry) seed oil is a lightweight plant oil rich in essential fatty acids (linoleic and alpha-linolenic acid), vitamin E, and carotenoids. It is used as an emollient and antioxidant that helps condition skin and reinforce the skin barrier. |
| Methyl Glucose Sesquistearate Emulsifier / emollient | Methyl Glucose Sesquistearate is a glucose-derived nonionic emulsifier used to stabilize oil-in-water emulsions and impart a smooth, conditioning skin feel. It is considered mild and is widely used as a formulation base ingredient rather than a treatment active. |
| Potassium Cetyl Phosphate Emulsifier | Potassium Cetyl Phosphate is an anionic emulsifier and surfactant used in oil-in-water formulations to stabilize emulsions and improve texture. It is considered a formulation/base ingredient rather than a treatment active. |
| Glyceryl Caprylate Emollient / antimicrobial co-preservative | Glyceryl Caprylate is a monoglyceride derived from glycerin and caprylic acid, used in skincare as an emollient, moisturizing agent, and skin-conditioning component with mild antimicrobial properties that support preservation. It is commonly employed to help stabilize formulations and reduce reliance on conventional preservatives. |
| Glyceryl Undecylenate Emollient / antimicrobial preservative-booster | Glyceryl undecylenate is the glyceryl ester of undecylenic acid, used in cosmetic formulations as a skin-conditioning emollient and a mild antimicrobial agent that helps support product preservation. It is generally well tolerated and functions as a formulation/base ingredient rather than a treatment active. |
| Trisodium Ethylenediamine Disuccinate Chelating agent | Trisodium Ethylenediamine Disuccinate (Trisodium Ethylenediamine Disuccinate, or HEDTA-type biodegradable chelator) is a biodegradable chelating agent used to bind metal ions in cosmetic formulations. By sequestering trace metals, it helps stabilize products, prevent discoloration and rancidity, and enhance the efficacy of preservatives and antioxidants. |
| Diethylhexyl Carbonate Emollient / solvent | Diethylhexyl Carbonate is a lightweight synthetic ester (dialkyl carbonate) used as an emollient and solvent in skincare and cosmetics. It imparts a smooth, dry, non-greasy skin feel and helps dissolve and spread other ingredients such as UV filters and active oils. |
| Cetearyl Ethylhexanoate Emollient / skin-conditioning agent | Cetearyl ethylhexanoate is an ester emollient derived from cetearyl alcohol and 2-ethylhexanoic acid, used to soften skin and improve a product's spreadability and texture. It functions as a lightweight, non-greasy occlusive that enhances the sensory feel of creams, lotions, and sunscreens. |
| Diethylhexyl Butamido Triazone Key active UVB filter (sunscreen agent) | Diethylhexyl Butamido Triazone (Iscotrizinol, Uvasorb HEB) is an organic, oil-soluble UVB filter that absorbs ultraviolet radiation primarily in the UVB range, providing photoprotection in sunscreen and daily-care formulations. It is highly photostable and substantive to skin, often combined with other filters for broad-spectrum coverage. |
| Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine Key active UV filter (sunscreen) | Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Sodium Acrylates/Beheneth-25 Methacrylate Crosspolymer Rheology modifier / thickener | A synthetic acrylate-based crosspolymer used to thicken, stabilize, and improve the texture of aqueous and emulsion cosmetic formulations. It functions as a gelling and emulsifying agent rather than a treatment active. |
| Hydrogenated Polydecene Emollient / skin-conditioning agent | Hydrogenated Polydecene is a synthetic hydrocarbon emollient derived from hydrogenated polydecene oligomers, used to provide a lightweight, non-greasy occlusive film that softens skin and improves spreadability in cosmetic formulations. It serves as a base or texture-enhancing ingredient rather than a biologically active treatment. |
| Lauryl Glucoside Surfactant/cleansing agent | Lauryl Glucoside is a non-ionic surfactant derived from coconut/palm fatty alcohols and glucose, used as a mild cleansing and foaming agent in skin and hair care products. It is considered gentle and biodegradable, often replacing harsher anionic surfactants. |
| Parfum Fragrance | Parfum (fragrance) is a blend of aromatic compounds added to cosmetic products to impart a pleasant scent or mask the base odor of other ingredients. It serves a sensory/formulation purpose rather than providing any skin benefit. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.