Below is every ingredient in Barrier Repair CSMS Routine explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Lactococcus Ferment Lysate is a postbiotic ingredient produced from the lysate of Lactococcus bacteria fermentation, used in skincare to support the skin barrier, microbiome balance, and skin renewal. It is valued for its conditioning and soothing properties.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Allergic contact dermatitis | Uncommon | A notable cause of allergic contact dermatitis, often attributed to impurities (amidoamine, 3-dimethylaminopropylamine) rather than the molecule itself; named Allergen of the Year in 2004. |
| Skin or eye irritation | Uncommon | Mild stinging or irritation, more likely in concentrated or rinse-off products and around the eyes. |
| Cross-reactivity with related surfactants | Rare | Patch-test reactions may overlap with chemically related amphoteric or amine-containing surfactants. |
| Sticky or tacky skin feel | Common | Cosmetic sensation at higher concentrations, not a health concern. |
| Mild transient stinging or irritation | Uncommon | More likely on broken or compromised skin or with high concentrations. |
| Skin dryness or moisture-wicking in very low humidity | Uncommon | Can theoretically draw water from skin in extremely dry environments if not paired with occlusives. |
| Skin irritation | Uncommon | Generally well tolerated, but mild irritation can occur, particularly with high concentrations or compromised skin barrier. |
| Eye irritation | Uncommon | May cause stinging or irritation on direct eye contact, relevant in cleanser and shampoo formulations. |
| Mild transient skin or eye irritation | Rare | Generally minimal due to its mild profile; more likely at higher concentrations or with eye contact. |
| Skin dryness or tightness | Rare | Possible with frequent use or in already compromised skin barriers. |
| Dryness or barrier disruption | Rare | Possible with prolonged or high-concentration exposure. |
| Contact urticaria | Very rare | Isolated case reports of hives following exposure. |
| Mild stinging or tingling on application | Common | Transient, more likely on broken or sensitive skin or at higher concentrations |
| Skin irritation, redness, or dryness | Uncommon | Associated with higher concentrations, low pH, or frequent use |
| Increased photosensitivity | Uncommon | AHAs can heighten UV sensitivity; sunscreen use is advised |
| Allergic or irritant contact dermatitis | Rare | Reported in sensitized individuals |
| Chemical burn or blistering | Very rare | Linked to misuse of high-concentration or very low-pH preparations |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Cocamidopropyl Betaine Surfactant / foaming cleanser | Cocamidopropyl Betaine is an amphoteric surfactant derived from coconut oil and dimethylaminopropylamine, used in cleansers, shampoos, and body washes to provide gentle foaming, viscosity, and to reduce the harshness of stronger anionic surfactants. It is widely regarded as mild but is a recognized contact allergen. |
| Glycerine Humectant | Glycerine (glycerol) is a humectant that draws water into the stratum corneum and helps maintain skin hydration and barrier function. It is widely used as a base/formulation ingredient in moisturizers, cleansers, and serums. |
| Decyl Glucoside Surfactant/Cleanser | Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants. |
| Disodium Cocoyl Glutamate Mild anionic surfactant / cleansing agent | Disodium Cocoyl Glutamate is a gentle amino acid-derived (glutamic acid + coconut fatty acid) surfactant used in cleansers and shampoos to provide mild foaming and cleansing with low irritation potential. It is well tolerated and suited for sensitive skin formulations. |
| Triethanolamine pH adjuster / emulsifier | Triethanolamine is an organic compound used in cosmetic formulations primarily to adjust pH and to act as an emulsifying agent, helping to stabilize mixtures of oil and water. It is typically present in small concentrations as a formulation aid rather than a therapeutic active. |
| Acrylates/C10-30 Alkyl Acrylate Crosspolymer Rheology modifier / emulsion stabilizer | Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic crosslinked acrylic polymer used to thicken, gel, and stabilize emulsions in skincare and cosmetic formulations. It helps suspend ingredients and provides a smooth, consistent texture without acting as a treatment active. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| PEG-40 Hydrogenated Castor Oil Solubilizer/emulsifier | PEG-40 Hydrogenated Castor Oil is a nonionic surfactant derived from hydrogenated castor oil reacted with ethylene oxide, widely used to dissolve fragrances and oils into water-based formulations and to stabilize emulsions. It functions as a base/formulation ingredient rather than a treatment active. |
| Citric Acid pH adjuster / AHA exfoliant | Citric acid is an alpha-hydroxy acid derived from citrus fruits, used primarily to adjust and buffer formulation pH and as a chelating agent, and at higher concentrations as a mild chemical exfoliant. It can promote surface cell turnover and is sometimes included in antioxidant or brightening products. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Panthenol Humectant / skin-conditioning agent | Panthenol (provitamin B5) is converted to pantothenic acid in the skin, where it acts as a humectant and helps support skin barrier function and hydration. It is also used for its soothing and mild anti-inflammatory properties in topical formulations. |
| Cocos Nucifera (Coconut) Oil Emollient/occlusive | Cocos Nucifera (Coconut) Oil is a plant-derived lipid used as an emollient and occlusive agent to soften skin and reduce transepidermal water loss. It is rich in saturated fatty acids, predominantly lauric acid. |
| Simmondsia Chinensis (Jojoba) Seed Oil Emollient / moisturizer | Jojoba seed oil is a liquid wax ester derived from the seeds of Simmondsia chinensis, valued for its skin-compatible composition resembling human sebum. It functions primarily as an emollient and occlusive agent to soften skin and reduce transepidermal water loss. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Lactococcus Ferment Lysate Key active Probiotic-derived skin conditioning agent | Lactococcus Ferment Lysate is a postbiotic ingredient produced from the lysate of Lactococcus bacteria fermentation, used in skincare to support the skin barrier, microbiome balance, and skin renewal. It is valued for its conditioning and soothing properties. |
| 611 (and) Cholesterol [and] 1 Emollient / skin-barrier lipid | Cholesterol is a naturally occurring lipid used in skincare as an emollient and barrier-repair agent, often combined with other lipids like ceramides and fatty acids to help restore the skin's protective barrier and reduce water loss. It is generally well tolerated and considered a supportive base/conditioning ingredient rather than a primary treatment active. |
| 2-hexanediol Humectant/preservative-booster | 1,2-Hexanediol (commonly written 2-hexanediol) is a multifunctional diol used in skincare primarily as a humectant, solvent, and preservative-enhancing agent that improves the antimicrobial efficacy of formulations. It is generally well tolerated and considered a base/formulation ingredient rather than a treatment active. |
| Benzyl Alcohol (and) Ethylhexylglycerin (and) Tocopherol Preservative blend / antioxidant | A multifunctional formulation blend combining benzyl alcohol and ethylhexylglycerin as preservatives/skin-conditioning agents with tocopherol (vitamin E) as an antioxidant. It is used to protect products from microbial spoilage and oxidation rather than to treat skin conditions. |
| 3-Butylene Glycol Humectant/solvent | 3-Butylene glycol (butylene glycol) is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent. It helps attract moisture, dissolve other ingredients, and improve product texture and preservation. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Sodium Acrylates Copolymer (and) Lecithin Film former / emulsion stabilizer | Sodium Acrylates Copolymer (and) Lecithin is a delivery and texture-modifying blend in which a synthetic anionic acrylate polymer is paired with lecithin, a natural phospholipid emulsifier, to thicken formulations, stabilize emulsions, and form encapsulating films that can help carry active ingredients onto the skin. It functions primarily as a formulation and delivery aid rather than as a therapeutic active. |
| C12-15 Alkyl Benzoate Emollient / texture enhancer | C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active. |
| Caprylic Emollient/skin-conditioning agent | Caprylic (typically caprylic/capric triglyceride, derived from coconut or palm oil and glycerin) is a lightweight emollient used to soften skin, disperse pigments, and improve product spreadability. It functions as a base or carrier ingredient rather than a therapeutic active. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.