Below is every ingredient in Strawberry Sunscreen Stick, In-Vivo Tested SPF 50+ PA++++ explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF.
Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure.
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection.
Fragaria Vesca (wild strawberry) Fruit Extract is a botanical ingredient rich in vitamin C, polyphenols, ellagic acid, and fruit acids, used in skincare for its antioxidant, astringent, and mild brightening properties. It is typically included to support skin conditioning and protect against oxidative stress.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Mild skin irritation | Rare | Generally considered non-irritating; occasional mild reactions reported. |
| Contact allergy/sensitization | Very rare | Silicones are low-allergenicity; documented allergic reactions are exceptional. |
| Eye irritation | Rare | Possible transient stinging if product enters the eyes. |
| Skin irritation | Rare | Mild irritation possible in sensitive individuals, though it is generally considered low-risk and well-tolerated. |
| Contact dermatitis/allergic reaction | Very rare | Allergic sensitization to synthetic waxes is uncommon given their inert chemical nature. |
| Pore-clogging/comedogenicity | Uncommon | Occlusive waxes may contribute to follicular blockage in acne-prone skin depending on concentration and formulation. |
| Mild skin irritation or redness | Rare | Generally well tolerated; occasional irritation reported in sensitive individuals. |
| Allergic contact dermatitis | Very rare | Isolated sensitization reactions; uncommon as a recognized allergen. |
| Comedogenicity (pore clogging) | Uncommon | Considered low-to-moderate comedogenic potential; may contribute to breakouts in acne-prone skin. |
| Acne/comedogenicity | Rare | Typically regarded as low or non-comedogenic, though some individuals report congestion with heavy silicone use. |
| Mild skin dryness | Uncommon | Due to oil-absorbing properties, particularly in high concentrations or on already dry skin. |
| Skin irritation or sensitivity | Rare | Occasional mild irritation reported, more likely with compromised skin barrier. |
| Respiratory irritation from inhalation of loose powder | Rare | Relevant mainly to powdered formulations; crystalline silica inhalation is a concern, but cosmetic-grade amorphous silica poses minimal risk. |
| Contact irritation or mild stinging | Uncommon | Transient skin irritation, especially on sensitive or compromised skin. |
| Photoallergic contact dermatitis | Rare | Reaction triggered by combined exposure to the ingredient and sunlight. |
| Potential endocrine/estrogenic activity | Very rare | Suggested by in vitro and animal studies; human relevance at cosmetic exposure levels remains uncertain. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Cyclopentasiloxane Emollient/silicone | Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations. |
| Synthetic Wax Emollient/thickener | Synthetic Wax is a man-made hydrocarbon wax derived from petroleum or synthesized via the Fischer-Tropsch process, used to thicken formulations, stabilize emulsions, and impart structure and texture to cosmetic products. It functions as a base ingredient that provides emollient and binding properties rather than delivering an active therapeutic effect. |
| Cetyl Ethylhexanoate Emollient / skin-conditioning ester | Cetyl Ethylhexanoate is a lightweight synthetic ester (cetyl alcohol combined with 2-ethylhexanoic acid) widely used as an emollient and spreading agent in skincare and cosmetics. It provides a smooth, non-greasy feel, improves texture, and helps soften and condition the skin. |
| Dimethicone/Vinyl Dimethicone Crosspolymer Silicone elastomer / texture enhancer | Dimethicone Vinyl Dimethicone Crosspolymer is a crosslinked silicone elastomer used in skincare and cosmetics to impart a silky, smooth feel, absorb excess oil, blur the appearance of pores and fine lines, and improve product spreadability. It functions as a formulation/sensory agent rather than a biologically active treatment ingredient. |
| Silica Absorbent/texturizer | Silica is a mineral-derived ingredient (silicon dioxide) used in cosmetics to absorb oil and sebum, improve texture, and act as a bulking, anti-caking, or matting agent. It is generally inert and well tolerated on skin. |
| Ethylhexyl Methoxycinnamate Key active UV filter (UVB sunscreen) | Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims. |
| Ceresin Emollient/Thickener | Ceresin is a refined microcrystalline wax derived from ozokerite (a natural mineral wax) used in cosmetics as a thickening, stabilizing, and emollient agent. It helps control viscosity and improve the texture and stability of emulsions, sticks, and balms. |
| Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active UVA filter (sunscreen) | Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens. |
| Cetearyl Dimethicone/Vinyl Dimethicone Crosspolymer Emollient/film-former | Cetearyl Dimethicone/Vinyl Dimethicone Crosspolymer is a silicone-based crosspolymer used in cosmetic formulations as an emollient, thickening agent, and film former that imparts a smooth, silky skin feel and helps stabilize emulsions. It is a formulation/base ingredient rather than a therapeutic active. |
| Cetostearyl Alcohol Emollient / emulsifier | Cetostearyl alcohol is a fatty alcohol blend of cetyl and stearyl alcohols used to thicken formulations, stabilize emulsions, and soften the skin. It functions as a non-active base ingredient rather than a therapeutic active. |
| Octocrylene Key active UV filter | Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF. |
| Butyl Methoxydibenzoylmethane Key active UV filter (UVA sunscreen) | Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure. |
| Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine Key active UV filter (sunscreen) | Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection. |
| Sorbitan Olivate Emulsifier | Sorbitan Olivate is an olive-derived ester of sorbitol and olive oil fatty acids used as a non-ionic emulsifier and emollient. It is often paired with Cetearyl Olivate (as Olivem 1000) to stabilize oil-in-water emulsions and impart a soft skin feel. |
| Theobroma Cacao Seed Butter Emollient/occlusive | Theobroma Cacao Seed Butter (cocoa butter) is a fat-rich plant butter used in skincare as an emollient and occlusive agent to soften skin and reduce transepidermal water loss. It is solid at room temperature and commonly used in moisturizers, balms, and lip products. |
| Butyrospermum Parkii Emollient/occlusive | Butyrospermum Parkii (shea butter) is a plant-derived fat used in skincare to moisturize, soften, and protect the skin barrier. It functions primarily as an emollient and occlusive agent rich in fatty acids and unsaponifiables. |
| Fragaria Vesca Fruit Extract Key active Antioxidant/skin-conditioning extract | Fragaria Vesca (wild strawberry) Fruit Extract is a botanical ingredient rich in vitamin C, polyphenols, ellagic acid, and fruit acids, used in skincare for its antioxidant, astringent, and mild brightening properties. It is typically included to support skin conditioning and protect against oxidative stress. |
| Laminaria Digitata Extract Conditioning/antioxidant | Laminaria Digitata Extract is derived from brown seaweed and is used in skincare for its mineral, polysaccharide, and antioxidant content, providing skin-conditioning, hydrating, and soothing benefits. It is commonly included for its purported moisturizing and protective properties. |
| Hydrogenated Lecithin Emollient / Emulsifier | Hydrogenated lecithin is a phospholipid derived from lecithin through hydrogenation, used in skincare as an emulsifier, emollient, and skin-conditioning agent. It also helps stabilize formulations and form liposomes that can aid delivery of other ingredients. |
| Cetyl-PG Hydroxyethyl Palmitamide Skin-conditioning emollient / pseudo-ceramide | Cetyl-PG Hydroxyethyl Palmitamide is a synthetic pseudo-ceramide used to mimic natural skin ceramides, helping to support the skin barrier and reduce transepidermal water loss. It functions as an emollient and moisturizing agent commonly found in barrier-repair and dry-skin formulations. |
| Ceramide 1 Skin barrier lipid / moisturizer | Ceramide 1 (Ceramide EOP) is a naturally occurring epidermal lipid used in skincare to help restore and reinforce the skin's barrier and reduce transepidermal water loss. It is commonly combined with other ceramides, cholesterol, and fatty acids to mimic the skin's natural lipid matrix. |
| Ceramide 2 Skin-barrier lipid / moisturizer | Ceramide 2 (Ceramide NS) is a naturally occurring sphingolipid used in skincare to help restore and reinforce the skin's lipid barrier, reducing transepidermal water loss and improving hydration. It is generally well tolerated and biocompatible with the skin's own ceramides. |
| Ceramide 3 Skin barrier replenisher / emollient | Ceramide 3 (also called Ceramide NP) is a lipid naturally found in the skin's stratum corneum that helps restore and maintain the skin barrier and reduce transepidermal water loss. It is widely used in moisturizers and barrier-repair formulations to improve hydration and skin integrity. |
| Ceramide 4 Skin-barrier lipid / emollient | Ceramide 4 (Ceramide AP) is a naturally occurring skin lipid used in formulations to help restore and reinforce the skin barrier and reduce transepidermal water loss. It supports the stratum corneum's lipid matrix, improving hydration and skin resilience. |
| Ceramide 6II Skin-barrier lipid / emollient | Ceramide 6II (a phytosphingosine-based ceramide) is a skin-identical lipid used to reinforce the stratum corneum's permeability barrier and reduce transepidermal water loss. It helps restore moisture and barrier function, particularly in dry or compromised skin. |
| Cholesterol Skin barrier lipid / emollient | Cholesterol is a naturally occurring lipid found in the skin's stratum corneum that, alongside ceramides and fatty acids, helps maintain the skin barrier and prevent transepidermal water loss. In skincare formulations it functions as an emollient and barrier-repair agent that improves hydration and skin resilience. |
| 1,2-Hexanediol Humectant / preservative booster | 1,2-Hexanediol is a synthetic diol used in skincare as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, often allowing reduced or preservative-free systems. It helps maintain product stability while contributing mild moisturizing properties. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Pentaerythrityl Tetra Di-t-Butyl Hydroxyhydrocinnamate Antioxidant/stabilizer | Pentaerythrityl Tetra-di-t-butyl Hydroxyhydrocinnamate is a hindered-phenol antioxidant (also known as the industrial stabilizer Irganox 1010) used in cosmetic formulations to prevent oxidation and rancidity of oils, fats, and other ingredients. It functions primarily as a formulation stabilizer rather than a skin-active treatment. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.