Below is every ingredient in Watermelon Cooling Sunscreen SPF 50+ PA++++ With New-Age UV Filters explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure.
Benzophenone-3 (oxybenzone) is a broad-spectrum chemical UV filter that absorbs both UVB and short UVA radiation, commonly used in sunscreens and as a photostabilizer in cosmetic formulations. It also helps protect product integrity by preventing UV degradation of other ingredients.
Oxothiazolidine (procysteine, a 2-oxothiazolidine-4-carboxylic acid derivative) is a cysteine prodrug used in skincare as an antioxidant intended to support intracellular glutathione synthesis. It is studied for its potential to reduce oxidative stress and contribute to skin brightening or protective effects.
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters.
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Contact irritation or mild stinging | Uncommon | Transient skin irritation, especially on sensitive or compromised skin. |
| Allergic contact dermatitis | Rare | Sensitization reported but relatively infrequent compared with other UV filters. |
| Photoallergic contact dermatitis | Rare | Reaction triggered by combined exposure to the ingredient and sunlight. |
| Potential endocrine/estrogenic activity | Very rare | Suggested by in vitro and animal studies; human relevance at cosmetic exposure levels remains uncertain. |
| Contact allergic reaction (allergic contact dermatitis) | Rare | Avobenzone is a recognized but uncommon cause of sunscreen allergy. |
| Photoallergic or photocontact dermatitis | Rare | Reactions triggered or worsened by sun exposure have been reported. |
| Skin irritation, redness, or stinging | Uncommon | Mild transient irritation may occur, particularly on sensitive or broken skin. |
| Eye irritation | Uncommon | Can cause stinging if the product migrates into the eyes. |
| Contact and photocontact allergic dermatitis | Uncommon | One of the more frequently reported photoallergens among UV filters, causing rash, redness, or itching, sometimes only upon sun exposure. |
| Skin irritation or stinging | Uncommon | Mild transient irritation, more likely on sensitive skin or near the eyes. |
| Systemic absorption | Common | Detectable in blood and urine after topical use; clinical significance is uncertain and under ongoing study. |
| Possible endocrine activity | Rare | Weak hormonal effects observed in laboratory and animal studies; relevance to humans at typical exposure remains unproven. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Ethylhexyl Methoxycinnamate Key active UV filter (UVB sunscreen) | Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims. |
| Butyl Methoxydibenzoylmethane Key active UV filter (UVA sunscreen) | Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure. |
| Benzophenone-3 Key active UV filter (sunscreen agent) | Benzophenone-3 (oxybenzone) is a broad-spectrum chemical UV filter that absorbs both UVB and short UVA radiation, commonly used in sunscreens and as a photostabilizer in cosmetic formulations. It also helps protect product integrity by preventing UV degradation of other ingredients. |
| Phospholipids Emollient / skin-conditioning agent and liposome-forming emulsifier | Phospholipids are amphiphilic lipids (commonly derived from soy or egg lecithin) used in skincare to form liposomes, stabilize emulsions, and reinforce the skin barrier. They also enhance penetration and delivery of other actives. |
| 1,3-Butylene Glycol Humectant / solvent | 1,3-Butylene glycol is a small diol used in skincare as a humectant, solvent, and viscosity modifier that helps retain moisture and improve product texture. It also has mild antimicrobial properties that can aid preservation. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| C12-15 Alkyl Benzoate Emollient / texture enhancer | C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active. |
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Cyclopentasiloxane Emollient/silicone | Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations. |
| Zea Mays (Corn) Starch Absorbent / anti-caking agent | Zea Mays (Corn) Starch is a natural polysaccharide powder derived from corn kernels, used in cosmetics to absorb moisture and oil, impart a soft matte feel, and act as a bulking or anti-caking agent. It is a formulation/base ingredient rather than a therapeutic active. |
| Citrullus Lanatus (Watermelon) Fruit Extract Antioxidant/humectant | Citrullus Lanatus (Watermelon) Fruit Extract is a plant-derived ingredient rich in vitamins, amino acids (notably citrulline), and antioxidants used in skincare for hydrating and free-radical-scavenging properties. It is commonly included for its soothing and conditioning effects. |
| Oxothiazolidine Key active Antioxidant / cysteine precursor | Oxothiazolidine (procysteine, a 2-oxothiazolidine-4-carboxylic acid derivative) is a cysteine prodrug used in skincare as an antioxidant intended to support intracellular glutathione synthesis. It is studied for its potential to reduce oxidative stress and contribute to skin brightening or protective effects. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Sodium Benzoate Preservative | Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5. |
| Methylene Bis-Benzotriazolyl Tetramethylbutylphenol Key active UV filter (broad-spectrum) | Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters. |
| Decyl Glucoside Surfactant/Cleanser | Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active UVA filter (sunscreen) | Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens. |
| Titanium Dioxide Key active UV filter / mineral sunscreen | Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin. |
| Silica Absorbent/texturizer | Silica is a mineral-derived ingredient (silicon dioxide) used in cosmetics to absorb oil and sebum, improve texture, and act as a bulking, anti-caking, or matting agent. It is generally inert and well tolerated on skin. |
| Fructooligosaccharides Key active Prebiotic / humectant | Fructooligosaccharides are plant-derived prebiotic carbohydrates used in skincare to selectively nourish beneficial skin microbiota and support skin barrier health. They also provide mild humectant and soothing properties in topical formulations. |
| Beta Vulgaris (Beet) Root Extract Skin conditioning / humectant | Beta Vulgaris (Beet) Root Extract is a plant-derived ingredient used in skincare for its humectant, antioxidant, and skin-conditioning properties, often providing soothing and hydrating benefits. It also contains betaine and natural pigments (betalains) that may help maintain moisture balance. |
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Aloe Barbadensis (Aloe Vera) Leaf Juice Soothing/humectant | Aloe Barbadensis leaf juice is a plant-derived extract used in skincare for its hydrating, soothing, and emollient properties. It is commonly included as a base or supporting ingredient to calm and moisturize the skin. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Menthyl Lactate Cooling agent / sensory modifier | Menthyl lactate is a menthol derivative (the lactate ester of menthol) used in skincare and personal care products to provide a cooling sensation without the strong odor or irritation associated with menthol. It functions primarily as a sensory additive rather than a therapeutic active. |
| Glyceryl Stearate Emulsifier/emollient | Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active. |
| PEG-100 Stearate Emulsifier/surfactant | PEG-100 Stearate is a polyethylene glycol ester of stearic acid used as a nonionic surfactant and emulsifier to stabilize oil-in-water formulations and improve skin feel. It functions as a formulation base ingredient rather than a therapeutic active. |
| Acrylates/C10-30 Alkyl Acrylate Crosspolymer Rheology modifier / emulsion stabilizer | Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic crosslinked acrylic polymer used to thicken, gel, and stabilize emulsions in skincare and cosmetic formulations. It helps suspend ingredients and provides a smooth, consistent texture without acting as a treatment active. |
| Sorbitan Stearate Emulsifier / surfactant | Sorbitan stearate is a non-ionic emulsifier derived from sorbitol and stearic acid, used to stabilize oil-in-water emulsions and improve texture in creams and lotions. It functions as a formulation aid rather than a therapeutic active. |
| Sucrose Cocoate Emollient/surfactant | Sucrose Cocoate is a sugar-based ester of sucrose and coconut fatty acids used as a mild nonionic surfactant, emulsifier, and emollient in skincare and cleansing formulations. It helps condition the skin and stabilize emulsions while being relatively gentle. |
| Sodium Lactate Humectant / NMF component | Sodium lactate is the sodium salt of lactic acid and a key component of skin's natural moisturizing factor (NMF), used to hydrate the skin and buffer formulation pH. It also has mild exfoliating and humectant properties that help maintain skin moisture and barrier function. |
| Sodium Gluconate Chelating agent / skin-conditioning | Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.