Below is every ingredient in Ceramide & Vitamin C Long Lasting Sunscreen - 50gm explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Diethylhexyl Butamido Triazone (Iscotrizinol, Uvasorb HEB) is an organic, oil-soluble UVB filter that absorbs ultraviolet radiation primarily in the UVB range, providing photoprotection in sunscreen and daily-care formulations. It is highly photostable and substantive to skin, often combined with other filters for broad-spectrum coverage.
Aluminium chlorohydrate is an aluminium salt used primarily as an antiperspirant active that reduces sweating by forming temporary plugs in the sweat ducts. It is also used as an astringent and antimicrobial agent in deodorant and cosmetic formulations.
Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations.
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin irritation or sensitivity | Very rare | Purified water itself is essentially non-irritating; reactions are virtually always attributable to other ingredients or contaminants rather than water. |
| Transepidermal water loss with frequent contact | Rare | Repeated exposure to water can disrupt the skin barrier and contribute to dryness, though this relates to contact frequency rather than a chemical effect. |
| Mild skin irritation | Rare | Generally considered non-irritating; occasional mild reactions reported. |
| Contact allergy/sensitization | Very rare | Silicones are low-allergenicity; documented allergic reactions are exceptional. |
| Eye irritation | Rare | Possible transient stinging if product enters the eyes. |
| Contact irritation or mild stinging | Uncommon | Transient skin irritation, especially on sensitive or compromised skin. |
| Allergic contact dermatitis | Rare | Sensitization reported but relatively infrequent compared with other UV filters. |
| Photoallergic contact dermatitis | Rare | Reaction triggered by combined exposure to the ingredient and sunlight. |
| Potential endocrine/estrogenic activity | Very rare | Suggested by in vitro and animal studies; human relevance at cosmetic exposure levels remains uncertain. |
| White cast on skin | Common | Cosmetic effect, more pronounced on deeper skin tones and with non-micronized grades. |
| Skin dryness or mild irritation | Uncommon | Usually related to the overall formulation rather than the ingredient itself. |
| Contact dermatitis or allergic reaction | Rare | Titanium dioxide is a recognized low-sensitizing ingredient; reactions are infrequent. |
| Comedogenicity / clogged pores | Rare | Can occur in some individuals depending on coating and formulation base. |
| Inhalation-related respiratory concern | Very rare | Relevant only to loose powder/spray forms via inhalation, not topical leave-on use. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| \n\n\n\n\nAqua Solvent/base | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble ingredients and forms the medium for emulsions. It is biologically inert and functions purely as a vehicle rather than an active treatment. |
| Cyclopentasiloxane Emollient/silicone | Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations. |
| Ethylhexyl Methoxycinnamate Key active UV filter (UVB sunscreen) | Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims. |
| Titanium Dioxide Key active UV filter / mineral sunscreen | Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin. |
| Diethylhexyl Butamido Triazone Key active UVB filter (sunscreen agent) | Diethylhexyl Butamido Triazone (Iscotrizinol, Uvasorb HEB) is an organic, oil-soluble UVB filter that absorbs ultraviolet radiation primarily in the UVB range, providing photoprotection in sunscreen and daily-care formulations. It is highly photostable and substantive to skin, often combined with other filters for broad-spectrum coverage. |
| Cetyl PEG\/PPG 10\/1 Dimethicone Emulsifier/surfactant | Cetyl PEG/PPG-10/1 Dimethicone is a silicone-based nonionic emulsifier used to stabilize water-in-silicone and water-in-oil emulsions, commonly found in foundations, sunscreens, and color cosmetics. It helps disperse pigments and improve product spreadability and texture. |
| Aluminium Chlorohydrate Key active Antiperspirant | Aluminium chlorohydrate is an aluminium salt used primarily as an antiperspirant active that reduces sweating by forming temporary plugs in the sweat ducts. It is also used as an astringent and antimicrobial agent in deodorant and cosmetic formulations. |
| Dimethicone\/Vinyl Dimethicone Crosspolymer Silicone-based film former / texture enhancer | Dimethicone/Vinyl Dimethicone Crosspolymer is a crosslinked silicone polymer used in skincare and cosmetics as a thickener, emollient, and film-forming agent that imparts a smooth, silky feel and helps fill in fine lines and create a soft-focus matte finish. It is generally considered inert, non-comedogenic for most users, and well tolerated. |
| Zinc Oxide Key active UV filter / skin protectant | Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations. |
| Coco-Caprylate\/Caprate Emollient / skin-conditioning agent | Coco-Caprylate/Caprate is a lightweight ester derived from coconut-sourced fatty alcohols and caprylic/capric acids, used as a silicone-like emollient that imparts a smooth, dry, non-greasy skin feel. It functions as a base/texture ingredient rather than a treatment active. |
| Polyglyceryl-3 Polyricinoleate Emulsifier | Polyglyceryl-3 Polyricinoleate (PGPR) is a polyglycerol ester of polyricinoleic acid (derived from castor oil) used as a lipophilic emulsifier and stabilizer, primarily in water-in-oil emulsions and lip/color cosmetics. It helps reduce viscosity and stabilize oil-based formulations. |
| Isostearic Acid Emollient/emulsifier | Isostearic acid is a branched-chain fatty acid used in cosmetic formulations as an emollient, co-emulsifier, and dispersing agent that improves spreadability and texture. It is valued for its oxidative stability and liquid consistency compared to straight-chain stearic acid. |
| Isododecane Emollient/solvent | Isododecane is a lightweight, volatile branched-chain hydrocarbon used as a solvent and emollient in cosmetics. It spreads easily and evaporates quickly, improving texture and wear in products like long-lasting makeup, primers, and sunscreens. |
| Disteardimonium Hectorite Rheology modifier / suspending agent | Disteardimonium Hectorite is a modified clay (quaternized hectorite) used in cosmetic formulations as a thickener and gellant, primarily in anhydrous and oil-based systems such as sunscreens, foundations, and lipsticks. It helps suspend pigments and prevent ingredient separation. |
| Propylene Carbonate Solvent / viscosity-controlling agent | Propylene carbonate is a clear, colorless solvent used in cosmetics to dissolve other ingredients and control viscosity, often functioning as a gelling and dispersing agent for pigments and clays. It is considered a formulation aid rather than an active skincare ingredient. |
| Bis Ethylhexyloxyphenol Methoxyphenyl Triazine Key active UV filter (sunscreen) | Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection. |
| Physalis Angulata Extract Key active Antioxidant/soothing botanical extract | Physalis Angulata Extract is a plant-derived ingredient used in skincare for its antioxidant, anti-inflammatory, and skin-conditioning properties, often included to help calm and protect the skin. It contains compounds such as physalins and flavonoids that may help mitigate oxidative stress. |
| Caprylic\/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin and act as a carrier or solvent in cosmetic formulations. It improves spreadability and helps maintain skin moisture without a heavy, greasy feel. |
| Ethyl-Ascorbic Acid Key active Antioxidant / Vitamin C derivative | 3-O-Ethyl Ascorbic Acid is a stable, water-soluble vitamin C derivative used in skincare for antioxidant protection, brightening, and support of collagen synthesis. It converts to ascorbic acid in the skin and is valued for its greater stability compared to pure L-ascorbic acid. |
| Polymethylsilsesquioxane Texture enhancer / mattifying agent | Polymethylsilsesquioxane is a silicone-based spherical powder used in skincare and cosmetics to impart a smooth, soft-focus, mattifying feel and improve spreadability. It is a formulation/texture ingredient rather than a treatment active. |
| Hyaluronic Acid Key active Humectant / hydrating agent | Hyaluronic acid is a glycosaminoglycan that attracts and binds water to the skin, helping to maintain hydration and improve the appearance of plumpness and smoothness. It is widely used in moisturizers and serums and is generally well tolerated across skin types. |
| Laminaria Digitata Extract Conditioning/antioxidant | Laminaria Digitata Extract is derived from brown seaweed and is used in skincare for its mineral, polysaccharide, and antioxidant content, providing skin-conditioning, hydrating, and soothing benefits. It is commonly included for its purported moisturizing and protective properties. |
| Cetyl-PG Hydroxyethyl Palmitamide Skin-conditioning emollient / pseudo-ceramide | Cetyl-PG Hydroxyethyl Palmitamide is a synthetic pseudo-ceramide used to mimic natural skin ceramides, helping to support the skin barrier and reduce transepidermal water loss. It functions as an emollient and moisturizing agent commonly found in barrier-repair and dry-skin formulations. |
| Ceramide 1 Skin barrier lipid / moisturizer | Ceramide 1 (Ceramide EOP) is a naturally occurring epidermal lipid used in skincare to help restore and reinforce the skin's barrier and reduce transepidermal water loss. It is commonly combined with other ceramides, cholesterol, and fatty acids to mimic the skin's natural lipid matrix. |
| Ceramide 2 Skin-barrier lipid / moisturizer | Ceramide 2 (Ceramide NS) is a naturally occurring sphingolipid used in skincare to help restore and reinforce the skin's lipid barrier, reducing transepidermal water loss and improving hydration. It is generally well tolerated and biocompatible with the skin's own ceramides. |
| Ceramide 3 Skin barrier replenisher / emollient | Ceramide 3 (also called Ceramide NP) is a lipid naturally found in the skin's stratum corneum that helps restore and maintain the skin barrier and reduce transepidermal water loss. It is widely used in moisturizers and barrier-repair formulations to improve hydration and skin integrity. |
| Ceramide 4 Skin-barrier lipid / emollient | Ceramide 4 (Ceramide AP) is a naturally occurring skin lipid used in formulations to help restore and reinforce the skin barrier and reduce transepidermal water loss. It supports the stratum corneum's lipid matrix, improving hydration and skin resilience. |
| Ceramide 6 II Skin-barrier lipid / emollient | Ceramide 6 II (a phytosphingosine-based ceramide, also known as ceramide AP) is a naturally occurring skin lipid used in skincare to help restore and reinforce the stratum corneum barrier and reduce transepidermal water loss. It is typically incorporated as part of physiological lipid blends to support hydration and skin barrier function. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Vitamin E Key active Antioxidant / emollient | Vitamin E (tocopherol) is a fat-soluble antioxidant used in skincare to protect cells from oxidative damage and to stabilize formulations against rancidity. It also functions as an emollient and helps support the skin barrier. |
| Sodium Benzoate Preservative | Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5. |
| whether for sports N/A — not a recognized skincare ingredient | The term "whether for sports" does not correspond to any known dermatological or cosmetic-chemistry ingredient and appears to be an invalid or garbled query. No factual reference data can be provided for it. |
| travel N/A — not a skincare ingredient | "Travel" is not a recognized dermatological or cosmetic-chemistry ingredient; it is a common English word referring to movement between locations. There is no documented topical function, formulation role, or research basis for it as a skincare component. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.