Earthrhythm · 🇮🇳 India

AQUA SURGE® SUNSTICK SPF 60 SUNSCREEN STICK - 20 gm

20 ingredients
What's in it

Below is every ingredient in AQUA SURGE® SUNSTICK SPF 60 SUNSCREEN STICK - 20 gm explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
1 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: Low
Highest comedogenic rating 0/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Your questions, answered from the ingredient list

Is AQUA SURGE® SUNSTICK SPF 60 SUNSCREEN STICK - 20 gm fungal-acne safe?
Based on its listed ingredients, AQUA SURGE® SUNSTICK SPF 60 SUNSCREEN STICK - 20 gm contains 1 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): Helianthus Annuus Seed Oil. If you are fungal-acne prone, you may want to avoid these.
Does AQUA SURGE® SUNSTICK SPF 60 SUNSCREEN STICK - 20 gm contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of AQUA SURGE® SUNSTICK SPF 60 SUNSCREEN STICK - 20 gm.
Will AQUA SURGE® SUNSTICK SPF 60 SUNSCREEN STICK - 20 gm clog pores?
The highest comedogenic rating among its listed ingredients is 0/5 (low). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is AQUA SURGE® SUNSTICK SPF 60 SUNSCREEN STICK - 20 gm safe to use in pregnancy?
None of its listed ingredients are flagged for pregnancy caution in our reference data — but always confirm your full routine with your own doctor.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

Homosalate
UV filter (sunscreen)

Homosalate is an organic (chemical) UV filter primarily absorbing UVB radiation, commonly used in sunscreens to help prevent sunburn. It is often combined with other filters as it is relatively unstable and offers limited UVA protection on its own.

Bis-ethylhexyloxyphenol Methoxyphenyl Triazine
UV filter (sunscreen)

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection.

Tocopheryl Acetate
Antioxidant

Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Mild contact irritationRareOccasional redness or stinging, usually in sensitive or compromised skin.
Allergic contact dermatitisVery rareIsolated case reports; considered a low-sensitizing ingredient.
Comedogenicity / clogged poresRareGenerally low comedogenic potential, but acne-prone individuals may occasionally react.
Mild skin irritation or rednessRareGenerally well tolerated; irritation is uncommon and usually mild.
Comedogenicity / acne aggravationUncommonLow comedogenic potential, though oleic-acid-rich variants may occasionally clog pores in acne-prone skin.
Skin irritationRareGenerally considered low-irritant; mild irritation reported occasionally, often related to other formulation components.
Acneiform breakouts / pore congestionRareConsidered low comedogenic potential, but occlusive film may contribute in acne-prone individuals.
Eye irritationRarePossible mild stinging or irritation upon direct ocular contact.
Skin irritation or sensitivityRareGenerally considered non-irritating; occasional mild reactions reported in sensitive individuals.
Contact dermatitis or allergic reactionVery rareSilicones are considered low-allergenicity; documented allergic responses are uncommon.
Comedogenic effects / clogged poresRareLargely regarded as non-comedogenic, though some acne-prone users report buildup with heavy use.
Product buildup on skin or hairUncommonFilm-forming nature may lead to perceived residue if not adequately cleansed.
Comedogenicity / breakoutsUncommonLow comedogenic potential but may contribute to clogged pores in acne-prone skin.
Contact urticariaVery rareIsolated reports of hive-like reactions tied to benzoate moiety.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Caprylic Capric Triglyceride
Emollient / skin-conditioning agent
Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active.
Helianthus Annuus Seed Oil
Emollient / skin-conditioning oil
Helianthus Annuus (Sunflower) Seed Oil is a plant-derived emollient rich in linoleic acid and vitamin E, used to soften skin and support the skin barrier. It is widely used as a base oil in moisturizers and cosmetic formulations.
Phenyl Trimethicone
Silicone emollient/conditioning agent
Phenyl Trimethicone is a phenyl-substituted silicone used in skincare and cosmetics to impart a smooth, silky feel, add shine, and provide water-repellent film-forming and conditioning properties. It functions as a formulation/base ingredient rather than a treatment active.
Dimethiconol
Emollient/silicone conditioning agent
Dimethiconol is a silicone-based polymer used in skincare and haircare to provide smoothing, conditioning, and a soft, non-greasy emollient feel. It forms a thin, breathable film that reduces moisture loss and improves spreadability of formulations.
C12-15 Alkyl Benzoate
Emollient / texture enhancer
C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active.
Dimethicone Crosspolymer
Silicone-based texture enhancer/film former
Dimethicone Crosspolymer is a crosslinked silicone polymer used in skincare and cosmetics to provide a smooth, silky feel, absorb excess oil, blur the appearance of pores and fine lines, and improve product spreadability. It functions as a formulation ingredient rather than a therapeutic active.
Homosalate Key active
UV filter (sunscreen)
Homosalate is an organic (chemical) UV filter primarily absorbing UVB radiation, commonly used in sunscreens to help prevent sunburn. It is often combined with other filters as it is relatively unstable and offers limited UVA protection on its own.
Bis-ethylhexyloxyphenol Methoxyphenyl Triazine Key active
UV filter (sunscreen)
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection.
Dibutyl Ethylhexanoyl Glutamide
Gelling agent / thickener
Dibutyl Ethylhexanoyl Glutamide is an amino acid (glutamic acid) derived oil-gelling agent used to thicken and structure anhydrous or oil-based cosmetic formulations. It is typically paired with Dibutyl Lauroyl Glutamide to form stable, transparent oil gels in products like cleansing oils, balms, and serums.
Dibutyl Lauroyl Glutamide
Gelling agent / rheology modifier
Dibutyl Lauroyl Glutamide is an amino acid–derived oil-gelling agent used to thicken and structure anhydrous and oil-based cosmetic formulations such as serums, sticks, and balms. It is a formulation/texturizing ingredient rather than a biologically active treatment.
Sodium Hyaluronate
Humectant / hydrator
Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid.
Methyl Methacrylate Crosspolymer
Texture enhancer / mattifying agent
Methyl Methacrylate Crosspolymer is a synthetic polymer used in cosmetics as a film-former and oil-absorbing powder that imparts a smooth, soft-focus, matte feel to formulations. It functions primarily as a sensory and texturizing base ingredient rather than a skin-treatment active.
Laminaria Digitata Extract
Conditioning/antioxidant
Laminaria Digitata Extract is derived from brown seaweed and is used in skincare for its mineral, polysaccharide, and antioxidant content, providing skin-conditioning, hydrating, and soothing benefits. It is commonly included for its purported moisturizing and protective properties.
Cetyl-Pg Hydroxyethyl Palmitamide
Skin-conditioning emollient / pseudo-ceramide
Cetyl-PG Hydroxyethyl Palmitamide is a synthetic pseudo-ceramide used to mimic natural skin ceramides, helping to support the skin barrier and reduce transepidermal water loss. It functions as an emollient and moisturizing agent commonly found in barrier-repair and dry-skin formulations.
Ceramide 1
Skin barrier lipid / moisturizer
Ceramide 1 (Ceramide EOP) is a naturally occurring epidermal lipid used in skincare to help restore and reinforce the skin's barrier and reduce transepidermal water loss. It is commonly combined with other ceramides, cholesterol, and fatty acids to mimic the skin's natural lipid matrix.
Ceramide 2
Skin-barrier lipid / moisturizer
Ceramide 2 (Ceramide NS) is a naturally occurring sphingolipid used in skincare to help restore and reinforce the skin's lipid barrier, reducing transepidermal water loss and improving hydration. It is generally well tolerated and biocompatible with the skin's own ceramides.
Ceramide 3
Skin barrier replenisher / emollient
Ceramide 3 (also called Ceramide NP) is a lipid naturally found in the skin's stratum corneum that helps restore and maintain the skin barrier and reduce transepidermal water loss. It is widely used in moisturizers and barrier-repair formulations to improve hydration and skin integrity.
Ceramide 4
Skin-barrier lipid / emollient
Ceramide 4 (Ceramide AP) is a naturally occurring skin lipid used in formulations to help restore and reinforce the skin barrier and reduce transepidermal water loss. It supports the stratum corneum's lipid matrix, improving hydration and skin resilience.
Ceramide 6 II
Skin-barrier lipid / emollient
Ceramide 6 II (a phytosphingosine-based ceramide, also known as ceramide AP) is a naturally occurring skin lipid used in skincare to help restore and reinforce the stratum corneum barrier and reduce transepidermal water loss. It is typically incorporated as part of physiological lipid blends to support hydration and skin barrier function.
Tocopheryl Acetate Key active
Antioxidant
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →