Below is every ingredient in RESTORE - HYDRATING CREAM CLEANSER WITH HYALURONIC ACID explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
No standout actives — this is a basic/support formula.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin dryness or barrier disruption with excessive contact | Uncommon | Frequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss. |
| Irritation from impurities or hard water minerals | Rare | Reactions are attributed to contaminants, chlorine, or mineral content rather than water itself. |
| Mild skin irritation or stinging | Common | More likely at higher concentrations or on compromised/sensitive skin |
| Allergic contact dermatitis | Uncommon | Recognized contact allergen; confirmed via patch testing |
| Irritant contact dermatitis | Uncommon | Non-allergic irritation, often dose-dependent |
| Worsening of pre-existing eczema or barrier-impaired skin | Rare | Penetration-enhancing effect may increase reactivity |
| Systemic toxicity from topical use | Very rare | Reported mainly with extensive application on broken skin, especially in infants or burn patients |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Skin or eye irritation | Uncommon | Mild stinging or irritation, more likely in concentrated or rinse-off products and around the eyes. |
| Cross-reactivity with related surfactants | Rare | Patch-test reactions may overlap with chemically related amphoteric or amine-containing surfactants. |
| Skin irritation | Rare | Generally well tolerated; mild irritation possible at high concentrations or with prolonged contact. |
| Eye irritation | Uncommon | May cause mild stinging on direct ocular contact in cleansers. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Cocamidopropyl Betaine Surfactant / foaming cleanser | Cocamidopropyl Betaine is an amphoteric surfactant derived from coconut oil and dimethylaminopropylamine, used in cleansers, shampoos, and body washes to provide gentle foaming, viscosity, and to reduce the harshness of stronger anionic surfactants. It is widely regarded as mild but is a recognized contact allergen. |
| Caprylyl/Capryl Glucoside Surfactant/cleanser | Caprylyl/Capryl Glucoside is a mild, biodegradable nonionic surfactant derived from coconut/palm-based fatty alcohols and glucose, used as a gentle cleansing and foaming agent. It is valued for its low irritation potential and suitability for sensitive-skin and baby cleansing formulations. |
| Sodium Methyl Cocoyl Taurate Mild surfactant/cleansing agent | Sodium Methyl Cocoyl Taurate is a gentle, taurine-derived anionic surfactant used in cleansers and shampoos to provide foaming and cleansing while being milder than sulfate-based surfactants. It is generally well tolerated and often chosen for sensitive-skin formulations. |
| Cetearyl Alcohol Emollient/emulsifier | Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions. |
| Cetearyl Glucoside Emulsifier | Cetearyl Glucoside is a plant-derived (glucose and fatty alcohol) nonionic emulsifier used to blend oil and water phases and stabilize creams and lotions. It is valued for being mild and well-tolerated in cosmetic formulations. |
| Butyrospermum Parkii Emollient/occlusive | Butyrospermum Parkii (shea butter) is a plant-derived fat used in skincare to moisturize, soften, and protect the skin barrier. It functions primarily as an emollient and occlusive agent rich in fatty acids and unsaponifiables. |
| Coconut Alkanes Emollient / skin-conditioning agent | Coconut Alkanes is a lightweight, plant-derived emollient (often paired with Coco-Caprylate/Caprate) used to soften skin and provide a silky, non-greasy slip in formulations. It serves as a natural alternative to silicones and mineral oils. |
| Coco-Caprylate/Caprate Emollient / skin-conditioning agent | Coco-Caprylate/Caprate is a lightweight ester emollient derived from coconut-sourced fatty alcohols and caprylic/capric acids, used to provide a smooth, dry, non-greasy skin feel and to act as a silicone alternative. It functions primarily as a spreading agent and texture enhancer in lotions, creams, and sunscreens. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Laminaria Digitata Extract Conditioning/antioxidant | Laminaria Digitata Extract is derived from brown seaweed and is used in skincare for its mineral, polysaccharide, and antioxidant content, providing skin-conditioning, hydrating, and soothing benefits. It is commonly included for its purported moisturizing and protective properties. |
| Cetyl PG Hydroxyethyl Palmitamide Skin-conditioning emollient / pseudo-ceramide | Cetyl-PG Hydroxyethyl Palmitamide is a synthetic pseudo-ceramide used to mimic natural skin ceramides, helping to support the skin barrier and reduce transepidermal water loss. It functions as an emollient and moisturizing agent commonly found in barrier-repair and dry-skin formulations. |
| Ceramide 1 Skin barrier lipid / moisturizer | Ceramide 1 (Ceramide EOP) is a naturally occurring epidermal lipid used in skincare to help restore and reinforce the skin's barrier and reduce transepidermal water loss. It is commonly combined with other ceramides, cholesterol, and fatty acids to mimic the skin's natural lipid matrix. |
| Ceramide 2 Skin-barrier lipid / moisturizer | Ceramide 2 (Ceramide NS) is a naturally occurring sphingolipid used in skincare to help restore and reinforce the skin's lipid barrier, reducing transepidermal water loss and improving hydration. It is generally well tolerated and biocompatible with the skin's own ceramides. |
| Ceramide 3 Skin barrier replenisher / emollient | Ceramide 3 (also called Ceramide NP) is a lipid naturally found in the skin's stratum corneum that helps restore and maintain the skin barrier and reduce transepidermal water loss. It is widely used in moisturizers and barrier-repair formulations to improve hydration and skin integrity. |
| Ceramide 4 Skin-barrier lipid / emollient | Ceramide 4 (Ceramide AP) is a naturally occurring skin lipid used in formulations to help restore and reinforce the skin barrier and reduce transepidermal water loss. It supports the stratum corneum's lipid matrix, improving hydration and skin resilience. |
| Ceramide 6 II Skin-barrier lipid / emollient | Ceramide 6 II (a phytosphingosine-based ceramide, also known as ceramide AP) is a naturally occurring skin lipid used in skincare to help restore and reinforce the stratum corneum barrier and reduce transepidermal water loss. It is typically incorporated as part of physiological lipid blends to support hydration and skin barrier function. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Triethylene Glycol Solvent / humectant | Triethylene glycol is a low-molecular-weight glycol used in cosmetic formulations primarily as a solvent and humectant, helping to dissolve ingredients and retain moisture. It is considered a base/formulation ingredient rather than a treatment active. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.