Below is every ingredient in Safe Sun Sports Pro-Defence Sunblock SPF 100+ PA+++ explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Homosalate is an organic (chemical) UV filter primarily absorbing UVB radiation, commonly used in sunscreens to help prevent sunburn. It is often combined with other filters as it is relatively unstable and offers limited UVA protection on its own.
Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF.
Octyl Methoxycinnamate (Octinoxate) is a widely used organic UVB filter that absorbs ultraviolet radiation to protect skin from sunburn and photodamage. It is commonly incorporated into sunscreens and daily-care products with SPF claims.
Octyl salicylate (octisalate) is an oil-soluble organic UVB filter commonly used in sunscreens to absorb UVB radiation and to help solubilize other UV filters such as avobenzone. It provides moderate UVB protection and is typically combined with additional filters for broad-spectrum coverage.
Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations.
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Contact irritation or stinging | Uncommon | Mild transient irritation, especially around the eyes or on sensitive skin. |
| Allergic contact dermatitis | Rare | Sensitization reactions confirmed by patch testing are infrequent. |
| Photoallergic/photocontact reaction | Rare | Reaction triggered by sun exposure after application. |
| Potential endocrine activity | Very rare | Weak estrogenic effects observed in laboratory/animal studies; human clinical relevance at typical use levels remains under regulatory review. |
| Contact dermatitis / skin irritation | Uncommon | Localized redness, itching, or stinging on application. |
| Photoallergic contact dermatitis | Rare | Reported particularly in adults, sometimes linked to prior ketoprofen sensitization. |
| Systemic absorption | Common | Detectable in blood after use; clinical significance unclear and not equated with harm. |
| Benzophenone formation over time | Uncommon | Degradation can yield trace benzophenone; relevance to skin health under study. |
| Contact irritation | Uncommon | Mild stinging or redness, especially on sensitive or compromised skin. |
| Photoallergic/photocontact dermatitis | Rare | Reaction triggered by combined exposure to the ingredient and sunlight. |
| Mild skin irritation or stinging | Uncommon | Usually transient, more likely on compromised or sensitive skin. |
| Photoallergic or photocontact reaction | Rare | Occasional cases noted with sun exposure, less common than with some other UV filters. |
| Eye irritation | Uncommon | Can cause stinging if product migrates into the eyes. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Homosalate Key active UV filter (sunscreen) | Homosalate is an organic (chemical) UV filter primarily absorbing UVB radiation, commonly used in sunscreens to help prevent sunburn. It is often combined with other filters as it is relatively unstable and offers limited UVA protection on its own. |
| Octocrylene Key active UV filter | Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF. |
| Octyl Methoxycinnamate Key active UV filter (sunscreen) | Octyl Methoxycinnamate (Octinoxate) is a widely used organic UVB filter that absorbs ultraviolet radiation to protect skin from sunburn and photodamage. It is commonly incorporated into sunscreens and daily-care products with SPF claims. |
| Octyl Salicylate Key active UV filter (UVB absorber) | Octyl salicylate (octisalate) is an oil-soluble organic UVB filter commonly used in sunscreens to absorb UVB radiation and to help solubilize other UV filters such as avobenzone. It provides moderate UVB protection and is typically combined with additional filters for broad-spectrum coverage. |
| Zinc Oxide Key active UV filter / skin protectant | Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations. |
| Glyceryl Stearate Emulsifier/emollient | Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active. |
| PEG-100 Stearate Emulsifier/surfactant | PEG-100 Stearate is a polyethylene glycol ester of stearic acid used as a nonionic surfactant and emulsifier to stabilize oil-in-water formulations and improve skin feel. It functions as a formulation base ingredient rather than a therapeutic active. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| C20-22 Alkyl Phosphate Emulsifier / co-emulsifier | C20-22 Alkyl Phosphate is a phosphate ester of long-chain fatty alcohols used primarily as an emulsifier and stabilizer to form smooth, stable oil-in-water creams and lotions. It is a formulation/base ingredient rather than a treatment active. |
| C20-22 Alcohols Emollient/thickener | C20-22 Alcohols are a blend of long-chain fatty alcohols used in skincare as emollients, emulsion stabilizers, and viscosity-increasing agents. They impart a smooth, conditioning texture and help bind oil and water phases in creams and lotions. |
| Ethylhexyl Methoxycinnamate Key active UV filter (UVB sunscreen) | Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims. |
| Butyl Methoxydibenzoylmethane Key active UV filter (UVA sunscreen) | Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure. |
| Benzophenone-3 Key active UV filter (sunscreen agent) | Benzophenone-3 (oxybenzone) is a broad-spectrum chemical UV filter that absorbs both UVB and short UVA radiation, commonly used in sunscreens and as a photostabilizer in cosmetic formulations. It also helps protect product integrity by preventing UV degradation of other ingredients. |
| Phospholipids Emollient / skin-conditioning agent and liposome-forming emulsifier | Phospholipids are amphiphilic lipids (commonly derived from soy or egg lecithin) used in skincare to form liposomes, stabilize emulsions, and reinforce the skin barrier. They also enhance penetration and delivery of other actives. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Sorbitan Stearate Emulsifier / surfactant | Sorbitan stearate is a non-ionic emulsifier derived from sorbitol and stearic acid, used to stabilize oil-in-water emulsions and improve texture in creams and lotions. It functions as a formulation aid rather than a therapeutic active. |
| Sucrose Cocoate Emollient/surfactant | Sucrose Cocoate is a sugar-based ester of sucrose and coconut fatty acids used as a mild nonionic surfactant, emulsifier, and emollient in skincare and cleansing formulations. It helps condition the skin and stabilize emulsions while being relatively gentle. |
| Ethylhexyl Palmitate Emollient / skin-conditioning agent | Ethylhexyl Palmitate is a lightweight ester of 2-ethylhexanol and palmitic acid used as an emollient, solvent, and texture-enhancer in cosmetics. It imparts a silky, dry feel and is often used as a synthetic substitute for mineral oil or silicones. |
| C25-52 Olefin/Undecylenic Acid Copolymer Film former / viscosity controlling agent | C25-52 Olefin/Undecylenic Acid Copolymer is a synthetic copolymer used primarily as a film-forming and texturizing agent in cosmetic and skincare formulations, helping to improve spreadability, sebum control, and the wear of the finished product. It functions as a base/formulation ingredient rather than as a biologically active treatment. |
| Cyclopentasiloxane Emollient/silicone | Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations. |
| Potassium Cetyl Phosphate Emulsifier | Potassium Cetyl Phosphate is an anionic emulsifier and surfactant used in oil-in-water formulations to stabilize emulsions and improve texture. It is considered a formulation/base ingredient rather than a treatment active. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Biosaccharide Gum-4 Skin-conditioning / soothing agent | Biosaccharide Gum-4 is a polysaccharide derived from microbial fermentation of plant sugars, used in topical formulations as a film-forming humectant and soothing agent. It is reported to help reduce visible signs of irritation and provide a smoothing, hydrating feel to the skin. |
| Caprylhydroxamic Acid Preservative / chelating agent | Caprylhydroxamic acid is a glycine-derived hydroxamic acid used primarily as a preservative and chelating agent in cosmetic formulations, where it helps control microbial growth (especially fungi) and stabilizes products by binding trace metal ions. It is typically used in combination with other preservatives such as glycols and is effective across a relatively wide pH range. |
| Caprylyl Glycol Humectant / skin-conditioning agent and preservative booster | Caprylyl glycol is a multifunctional emollient and humectant derived from caprylic acid that helps hydrate skin and enhance the efficacy of preservatives in formulations. It is widely used as a stabilizing and conditioning base ingredient rather than a therapeutic active. |
| Titanium Dioxide Key active UV filter / mineral sunscreen | Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin. |
| Acrylamide/Sodium Acrylate Copolymer Thickener / stabilizer | Acrylamide/Sodium Acrylate Copolymer is a synthetic polymer used in cosmetic formulations as a thickening, emulsion-stabilizing, and film-forming agent. It helps give products a smooth texture and consistent viscosity. |
| Paraffinum Liquidum Emollient/occlusive | Paraffinum Liquidum (mineral oil) is a highly refined petroleum-derived liquid hydrocarbon used as an emollient and occlusive agent. It forms a protective barrier on the skin that reduces transepidermal water loss and helps soften and smooth the skin. |
| Trideceth-6 Surfactant/emulsifier | Trideceth-6 is a polyethylene glycol ether of tridecyl alcohol used as a nonionic surfactant, emulsifier, and solubilizer in cosmetic formulations. It helps blend oil and water phases and disperse fragrances or other oily components in water-based products. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Citric Acid pH adjuster / AHA exfoliant | Citric acid is an alpha-hydroxy acid derived from citrus fruits, used primarily to adjust and buffer formulation pH and as a chelating agent, and at higher concentrations as a mild chemical exfoliant. It can promote surface cell turnover and is sometimes included in antioxidant or brightening products. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Enteromorpha Compressa Extract Key active Antioxidant / soothing botanical extract | Enteromorpha Compressa Extract is derived from a green marine algae and is used in skincare for its antioxidant, anti-inflammatory, and skin-conditioning properties. It is often included to help protect against environmental stress and support a more even skin tone. |
| Silybum Marianum Fruit Extract Key active Antioxidant | Silybum Marianum (milk thistle) Fruit Extract is rich in silymarin flavonolignans and is used in skincare for its antioxidant and anti-inflammatory properties, helping protect skin from free-radical and UV-induced oxidative stress. It is also studied for soothing and barrier-supportive effects. |
| Ocimum Sanctum Leaf Extract Key active Antioxidant/anti-inflammatory botanical extract | Ocimum Sanctum (Holy Basil/Tulsi) leaf extract is a plant-derived ingredient valued for its antioxidant, anti-inflammatory, and antimicrobial properties, attributed to compounds such as eugenol, ursolic acid, and rosmarinic acid. It is used in skincare to help soothe skin, reduce oxidative stress, and address blemish-prone skin. |
| Chamomilla Recutita Flower Extract Key active Soothing/anti-inflammatory botanical extract | Chamomilla Recutita (German chamomile) flower extract is a plant-derived ingredient used in skincare for its soothing, anti-inflammatory, and antioxidant properties, attributed to compounds such as bisabolol, chamazulene, and flavonoids. It is commonly added to formulations intended to calm sensitive, irritated, or reddened skin. |
| Calendula Officinalis Flower Extract Soothing/anti-inflammatory botanical extract | Calendula Officinalis Flower Extract is a plant-derived ingredient used in skincare for its purported soothing, anti-inflammatory, and wound-supporting properties. It is commonly included in products marketed for sensitive, irritated, or compromised skin. |
| BHT Antioxidant/preservative | BHT (butylated hydroxytoluene) is a synthetic phenolic antioxidant used in small amounts to prevent oxidation and rancidity of oils, fragrances, and other unstable components, helping maintain product stability and shelf life. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Parfum Fragrance | Parfum (fragrance) is a blend of aromatic compounds added to cosmetic products to impart a pleasant scent or mask the base odor of other ingredients. It serves a sensory/formulation purpose rather than providing any skin benefit. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.