Below is every ingredient in Multani Mitti Face Wash with Multani Mitti & Bulgarian Rose For Oil Control & Acne - 100 ml explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Multani Mitti (Fuller's earth) is a natural clay rich in minerals like magnesium, silica, and aluminum, traditionally used as a face pack to absorb excess oil, cleanse, and exfoliate the skin. It is valued for its oil-absorbing and mattifying properties, particularly for oily and acne-prone skin.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Vitamin E (tocopherol) is a fat-soluble antioxidant used in skincare to protect cells from oxidative damage and to stabilize formulations against rancidity. It also functions as an emollient and helps support the skin barrier.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin dryness or tightness | Common | Soap-based surfactants derived from it can strip natural oils, especially with frequent use. |
| Skin irritation | Uncommon | May cause mild irritation in sensitive individuals or at higher concentrations. |
| Comedogenicity (pore clogging) | Uncommon | Considered moderately comedogenic; may contribute to breakouts in acne-prone skin. |
| Allergic contact dermatitis | Rare | Sensitization is infrequent but has been reported. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Dryness or tightness | Common | Can disrupt the skin barrier and strip natural oils with frequent use. |
| Chemical burns | Rare | Occurs primarily with concentrated raw material or improper formulation, not in finished consumer products. |
| Eye irritation or injury | Uncommon | Risk with accidental contact, particularly with cleansers near the eye area. |
| Mild skin irritation | Uncommon | Occasional transient redness or stinging, more likely in sensitive or compromised skin. |
| Comedogenicity / pore clogging | Uncommon | May contribute to clogged pores in acne-prone individuals depending on concentration and formulation. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Myristic Acid Surfactant/cleansing agent | Myristic acid is a saturated fatty acid commonly used in skincare as a cleansing and emulsifying agent, often reacted with alkalis to form soap-based surfactants. It contributes to foaming and texture in cleansers and other formulations. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Potassium Hydroxide pH adjuster / saponifying agent | Potassium hydroxide is a strong alkaline compound used in cosmetics to adjust pH and to saponify fatty acids in the production of liquid soaps and cleansers. At regulated low concentrations in finished products it is considered safe, functioning as a formulation aid rather than an active treatment. |
| Stearic Acid Emulsifier / thickener | Stearic acid is a saturated long-chain fatty acid widely used in cosmetics as an emulsifier, thickening agent, and emollient to stabilize creams and lotions. It is generally considered a base/formulation ingredient rather than a therapeutic active. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Decyl Glucoside Surfactant/Cleanser | Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants. |
| Multani Mitti Key active Absorbent/clay cleanser | Multani Mitti (Fuller's earth) is a natural clay rich in minerals like magnesium, silica, and aluminum, traditionally used as a face pack to absorb excess oil, cleanse, and exfoliate the skin. It is valued for its oil-absorbing and mattifying properties, particularly for oily and acne-prone skin. |
| Lauric Acid Cleansing/surfactant & emollient fatty acid | Lauric acid is a medium-chain saturated fatty acid commonly derived from coconut or palm kernel oil, used in skincare as a cleansing agent, emulsifier, and emollient. It also has documented antimicrobial activity, particularly against Cutibacterium acnes. |
| Glycol Distearate Opacifier/pearlescent agent, emollient | Glycol Distearate is a diester of ethylene glycol and stearic acid used primarily to impart a pearlescent or opaque appearance to cleansers and shampoos, while also providing mild emollient and thickening properties. It functions as a formulation aid rather than an active treatment ingredient. |
| Sodium PCA Humectant | Sodium PCA (sodium pyrrolidone carboxylic acid) is the sodium salt of pyroglutamic acid and a component of the skin's natural moisturizing factor (NMF). It is widely used in cosmetics as a water-binding humectant to hydrate and soften the skin. |
| Glyceryl Stearate Emulsifier/emollient | Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Polyquaternium-7 Conditioning/film-forming polymer | Polyquaternium-7 is a cationic synthetic copolymer used in skincare and hair care as a conditioning agent and film former, imparting smoothness, reducing static, and enhancing sensory feel. It is a formulation ingredient rather than a therapeutic active. |
| Rosa Damascena Flower Extract (Bulgarian Rose) Soothing/antioxidant botanical extract | Rosa Damascena Flower Extract is a plant-derived ingredient valued for its antioxidant, anti-inflammatory, and aromatic properties, often used to soothe skin and provide fragrance in cosmetic formulations. It contains polyphenols, flavonoids, and volatile aromatic compounds. |
| IFRA Certified Allergen Free Fragrance Fragrance/masking agent | A fragrance compliant with International Fragrance Association (IFRA) standards and formulated to exclude the 26 EU-designated allergens, used to impart or mask scent in cosmetic products. It is a formulation additive rather than a treatment active. |
| Titanium Dioxide Key active UV filter / mineral sunscreen | Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin. |
| Vitamin E Key active Antioxidant / emollient | Vitamin E (tocopherol) is a fat-soluble antioxidant used in skincare to protect cells from oxidative damage and to stabilize formulations against rancidity. It also functions as an emollient and helps support the skin barrier. |
| Butylated Hydroxytoluene Antioxidant/preservative | Butylated Hydroxytoluene (BHT) is a synthetic antioxidant used in cosmetic formulations to prevent oxidation and rancidity of oils and fats, helping maintain product stability and shelf life. It functions as a stabilizer rather than a therapeutic active. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.