Nykaa · 🇮🇳 India

Asaya Hint Of Tint Tinted Sunscreen Spf 50 Pa

33 ingredients
What's in it

Below is every ingredient in Asaya Hint Of Tint Tinted Sunscreen Spf 50 Pa explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
2 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: Low
Highest comedogenic rating 1/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Your questions, answered from the ingredient list

Is Asaya Hint Of Tint Tinted Sunscreen Spf 50 Pa fungal-acne safe?
Based on its listed ingredients, Asaya Hint Of Tint Tinted Sunscreen Spf 50 Pa contains 2 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): Glyceryl Stearate, PEG-100 Stearate. If you are fungal-acne prone, you may want to avoid these.
Does Asaya Hint Of Tint Tinted Sunscreen Spf 50 Pa contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of Asaya Hint Of Tint Tinted Sunscreen Spf 50 Pa.
Will Asaya Hint Of Tint Tinted Sunscreen Spf 50 Pa clog pores?
The highest comedogenic rating among its listed ingredients is 1/5 (low). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is Asaya Hint Of Tint Tinted Sunscreen Spf 50 Pa safe to use in pregnancy?
None of its listed ingredients are flagged for pregnancy caution in our reference data — but always confirm your full routine with your own doctor.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

Titanium Dioxide
UV filter / mineral sunscreen

Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.

Niacinamide
Cell-communicating / barrier-repair active

Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.

Ethylhexyl Methoxycinnamate
UV filter (UVB sunscreen)

Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.

Butyl Methoxydibenzoylmethane
UV filter (UVA sunscreen)

Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure.

Octocrylene
UV filter

Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF.

Centella Asiatica Extract
Soothing/antioxidant active

Centella Asiatica Extract is a plant-derived ingredient rich in triterpenoids (asiaticoside, madecassoside, asiatic and madecassic acids) used to calm inflammation, support wound healing, and strengthen the skin barrier. It is also valued for antioxidant and collagen-supporting properties in topical formulations.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Irritation or sensitivityVery rarePurified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water.
Transepidermal water loss aggravation in compromised skinRareEvaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent.
Mild skin irritationRareGenerally considered non-irritating; occasional mild reactions reported.
Contact allergy/sensitizationVery rareSilicones are low-allergenicity; documented allergic reactions are exceptional.
Eye irritationRarePossible transient stinging if product enters the eyes.
White cast on skinCommonCosmetic effect, more pronounced on deeper skin tones and with non-micronized grades.
Skin dryness or mild irritationUncommonUsually related to the overall formulation rather than the ingredient itself.
Contact dermatitis or allergic reactionRareTitanium dioxide is a recognized low-sensitizing ingredient; reactions are infrequent.
Comedogenicity / clogged poresRareCan occur in some individuals depending on coating and formulation base.
Inhalation-related respiratory concernVery rareRelevant only to loose powder/spray forms via inhalation, not topical leave-on use.
Mild contact irritationRareOccasional redness or stinging, usually in sensitive or compromised skin.
Allergic contact dermatitisVery rareIsolated case reports; considered a low-sensitizing ingredient.
Mild transient flushing or rednessUncommonMore likely at higher concentrations or in sensitive skin; usually subsides quickly.
Tingling, stinging, or burning sensationUncommonOften associated with higher percentages or compromised barrier.
Contact irritation or itchingRareGenerally dose-dependent and resolves with discontinuation.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Aqua
Solvent / vehicle
Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery.
Cyclopentasiloxane
Emollient/silicone
Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations.
Titanium Dioxide Key active
UV filter / mineral sunscreen
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Caprylic Capric Triglyceride
Emollient / skin-conditioning agent
Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active.
Niacinamide Key active
Cell-communicating / barrier-repair active
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Arisaema Amurense Extract
Skin-conditioning / botanical extract
Arisaema Amurense Extract is derived from the Amur jack-in-the-pulpit plant and is used in cosmetics primarily as a skin-conditioning agent, with traditional associations to anti-inflammatory and antioxidant properties. Clinical evidence specific to topical cosmetic use is limited.
Decyl Glucoside
Surfactant/Cleanser
Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants.
1,2-Hexanediol
Humectant / preservative booster
1,2-Hexanediol is a synthetic diol used in skincare as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, often allowing reduced or preservative-free systems. It helps maintain product stability while contributing mild moisturizing properties.
Ethylhexyl Methoxycinnamate Key active
UV filter (UVB sunscreen)
Ethylhexyl Methoxycinnamate (octinoxate) is a widely used organic UVB-absorbing sunscreen agent that protects skin from ultraviolet radiation. It is commonly incorporated into sunscreens and daily cosmetics with SPF claims.
Butyl Methoxydibenzoylmethane Key active
UV filter (UVA sunscreen)
Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure.
Octocrylene Key active
UV filter
Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF.
Butylene Glycol
Humectant / solvent
Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations.
Propanediol
Humectant/solvent
Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives.
Cetyl Alcohol
Emollient / emulsifier
Cetyl alcohol is a fatty alcohol used in skincare and cosmetics as an emollient, thickener, and emulsion stabilizer. It softens skin and helps maintain the consistency and texture of creams and lotions.
Trehalose
Humectant / moisturizer
Trehalose is a naturally occurring disaccharide used in skincare as a humectant and protective agent, helping retain moisture and stabilize cell membranes and proteins against dehydration and oxidative stress. It is well tolerated and commonly used to support skin barrier hydration.
Aloe Barbadensis Leaf Extract
Soothing/moisturizing agent
Aloe Barbadensis Leaf Extract is derived from the aloe vera plant and is used in skincare for its hydrating, soothing, and mild anti-inflammatory properties. It is commonly included as a supportive base ingredient rather than a primary treatment active.
Dimethicone
Emollient/occlusive (silicone)
Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active.
Phenoxyethanol
Preservative
Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment.
Glyceryl Stearate
Emulsifier/emollient
Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active.
PEG-100 Stearate
Emulsifier/surfactant
PEG-100 Stearate is a polyethylene glycol ester of stearic acid used as a nonionic surfactant and emulsifier to stabilize oil-in-water formulations and improve skin feel. It functions as a formulation base ingredient rather than a therapeutic active.
Centella Asiatica Extract Key active
Soothing/antioxidant active
Centella Asiatica Extract is a plant-derived ingredient rich in triterpenoids (asiaticoside, madecassoside, asiatic and madecassic acids) used to calm inflammation, support wound healing, and strengthen the skin barrier. It is also valued for antioxidant and collagen-supporting properties in topical formulations.
Hippophae Rhamnoides Extract Key active
Antioxidant/Emollient
Hippophae Rhamnoides (sea buckthorn) extract is derived from the fruit, seeds, or leaves and is rich in vitamins (C, E, carotenoids), flavonoids, and fatty acids. It is used in skincare for its antioxidant, soothing, and skin-conditioning properties.
Crocus Sativus Flower Extract Key active
Antioxidant/skin-brightening botanical
Crocus Sativus (saffron) Flower Extract is a plant-derived ingredient rich in carotenoids (crocin, crocetin) and flavonoids used in skincare for its antioxidant, anti-inflammatory, and brightening properties. It is studied for reducing hyperpigmentation and protecting against UV-induced oxidative stress.
Glycyrrhiza Glabra Root Extract Key active
Soothing / brightening agent
Glycyrrhiza Glabra (licorice) Root Extract is a botanical ingredient containing glycyrrhizin and glabridin, valued for its anti-inflammatory and skin-brightening properties. It is commonly used to calm irritation, reduce redness, and help fade hyperpigmentation by inhibiting tyrosinase activity.
Tocopheryl Acetate Key active
Antioxidant
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Phospholipids
Emollient / skin-conditioning agent and liposome-forming emulsifier
Phospholipids are amphiphilic lipids (commonly derived from soy or egg lecithin) used in skincare to form liposomes, stabilize emulsions, and reinforce the skin barrier. They also enhance penetration and delivery of other actives.
Aminomethyl Propanol
pH adjuster / neutralizer
Aminomethyl Propanol (AMP) is an alkaline organic amine used to adjust and buffer the pH of cosmetic formulations, commonly neutralizing acidic gelling agents like carbomers to thicken or stabilize products. It functions as a formulation aid rather than a skin-treatment active.
HEMA
Adhesive monomer / acrylate
HEMA (2-hydroxyethyl methacrylate) is a methacrylate monomer widely used in artificial nails, gel polishes, and dental and medical adhesives to provide film-forming and bonding properties. It is a formulation ingredient rather than a skin-treatment active, valued for its ability to polymerize into durable resins.
Crosspolymer
Texture modifier / thickener
Crosspolymers are cross-linked synthetic polymers (e.g., carbomer or dimethicone crosspolymers) used to thicken, stabilize, and improve the sensory feel of formulations. They function as rheology modifiers and film-formers rather than as biologically active treatment ingredients.
Xanthan Gum
Thickener/stabilizer
Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects.
C13-15 Alkane
Emollient / solvent
C13-15 Alkane is a lightweight, plant-derived (often sugarcane-based) liquid hydrocarbon used as an emollient and spreading agent in skincare. It softens skin, improves product texture, and serves as a sustainable alternative to silicones and mineral oil.
Coco-Glucoside
Mild surfactant/cleanser
Coco Glucoside is a gentle, plant-derived nonionic surfactant (an alkyl polyglucoside made from coconut fatty alcohols and glucose) used as a cleansing and foaming agent in face washes, shampoos, and body cleansers. It is valued for its mildness, biodegradability, and good skin and eye tolerance compared with harsher surfactants.
Sodium Gluconate
Chelating agent / skin-conditioning
Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →