Nykaa · 🇮🇳 India

Florence By Mills Clear The Way Clarifying Face Wash

22 ingredients
What's in it

Below is every ingredient in Florence By Mills Clear The Way Clarifying Face Wash explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
1 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: Low
Highest comedogenic rating 0/5 — matters for oily, acne-prone skin
Contains fragrance / allergens
Linalool
Pregnancy: use caution
Salicylic Acid — discuss with a doctor

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Next: check the rest of your shelf

Your questions, answered from the ingredient list

Is Florence By Mills Clear The Way Clarifying Face Wash fungal-acne safe?
Based on its listed ingredients, Florence By Mills Clear The Way Clarifying Face Wash contains 1 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): Lavandula Angustifolia (Lavender) Oil. If you are fungal-acne prone, you may want to avoid these.
Does Florence By Mills Clear The Way Clarifying Face Wash contain fragrance?
Yes — Florence By Mills Clear The Way Clarifying Face Wash lists Linalool, which are fragrance ingredients or EU-declared allergens. Relevant if your skin is sensitive or reactive.
Will Florence By Mills Clear The Way Clarifying Face Wash clog pores?
The highest comedogenic rating among its listed ingredients is 0/5 (low). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is Florence By Mills Clear The Way Clarifying Face Wash safe to use in pregnancy?
Florence By Mills Clear The Way Clarifying Face Wash contains 1 ingredient(s) commonly flagged for caution in pregnancy in published guidance: Salicylic Acid. Discuss with your doctor before using it while pregnant or breastfeeding.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

Salicylic Acid
Beta-hydroxy acid (BHA) exfoliant / keratolytic

Salicylic acid is a lipid-soluble beta-hydroxy acid that exfoliates the skin surface and penetrates sebaceous pores to loosen and dissolve keratin and debris. It is widely used to treat acne, blackheads, and conditions involving thickened or scaly skin.

Niacinamide
Cell-communicating / barrier-repair active

Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.

Gluconolactone
Polyhydroxy acid (PHA) exfoliant/humectant

Gluconolactone is a polyhydroxy acid that gently exfoliates the skin surface, provides antioxidant and humectant benefits, and is often considered milder than alpha hydroxy acids. It is well tolerated, including by sensitive skin, due to its larger molecular size and slower penetration.

Lactic Acid
Chemical exfoliant (AHA)

Lactic acid is an alpha-hydroxy acid that exfoliates the skin by loosening bonds between corneocytes, promoting cell turnover, and acting as a humectant to improve hydration, texture, and tone. It is commonly used at concentrations ranging from low (hydration) to higher peel-strength formulations.

Glycolic Acid
Chemical exfoliant (AHA)

Glycolic acid is an alpha-hydroxy acid derived from sugar cane that exfoliates by loosening bonds between dead skin cells on the surface, promoting cell turnover and improving texture, tone, and fine lines. It is one of the smallest AHAs, allowing relatively deep penetration into the skin.

Tocopherol
Antioxidant

Tocopherol (vitamin E) is a lipid-soluble antioxidant used in skincare to protect skin and formulations from oxidative damage caused by free radicals and UV exposure. It also functions as a skin-conditioning and emollient agent and can stabilize oils against rancidity.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Skin dryness or barrier disruption with excessive contactUncommonFrequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss.
Irritation from impurities or hard water mineralsRareReactions are attributed to contaminants, chlorine, or mineral content rather than water itself.
Mild transient stinging or irritationUncommonMore likely at high concentrations or on compromised/broken skin.
Tacky or sticky skin feelCommonA cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations.
Contact dermatitis or allergic reactionRareTrue allergy to glycerin is uncommon; patch-test positivity is infrequent.
Skin dehydration in very low humidityRareIn very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive.
Skin irritationCommonCan cause dryness, tightness, or mild irritation, especially with frequent use or in higher concentrations.
Eye irritationCommonMay sting or irritate eyes on contact, relevant in rinse-off products like shampoos.
Disruption of skin barrierUncommonRepeated exposure can strip natural lipids and impair the skin's protective barrier in sensitive individuals.
Allergic contact dermatitisRareSensitization reactions are infrequently reported.
Mild skin or eye irritationUncommonGenerally low irritation potential, but can occur with high concentrations or prolonged contact.
Dryness or stingingRareMore likely on already compromised or very sensitive skin.
Mild skin irritationUncommonTransient stinging or redness, more likely on compromised or sensitive skin.
Enhanced penetration of co-formulated irritantsUncommonAs a penetration enhancer it may increase absorption and irritation potential of other actives.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Water
Solvent/vehicle
Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating.
Glycerin
Humectant
Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations.
Sodium C14-16 Olefin Sulfonate
Anionic surfactant/cleansing agent
Sodium C14-16 Olefin Sulfonate is a synthetic anionic surfactant used as a cleansing and foaming agent in shampoos, body washes, and facial cleansers. It produces a rich lather and helps remove oil and dirt by lowering surface tension.
Sodium Cocoamphoacetate
Mild amphoteric surfactant/cleansing agent
Sodium cocoamphoacetate is a coconut-derived amphoteric surfactant used in cleansers, shampoos, and body washes to provide gentle cleansing, foaming, and to reduce the irritation potential of harsher anionic surfactants. It is valued for its mildness and is commonly found in baby and sensitive-skin formulations.
Propanediol
Humectant/solvent
Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives.
Lavandula Angustifolia (Lavender) Oil
Fragrance/essential oil
Lavandula Angustifolia (Lavender) Oil is a steam-distilled essential oil used in skincare primarily as a fragrance and aromatic agent, with minor claimed soothing properties. It contains volatile compounds such as linalool and linalyl acetate that can act as both sensory additives and potential sensitizers.
Salicylic Acid Key active
Beta-hydroxy acid (BHA) exfoliant / keratolytic
Salicylic acid is a lipid-soluble beta-hydroxy acid that exfoliates the skin surface and penetrates sebaceous pores to loosen and dissolve keratin and debris. It is widely used to treat acne, blackheads, and conditions involving thickened or scaly skin.
Niacinamide Key active
Cell-communicating / barrier-repair active
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Gluconolactone Key active
Polyhydroxy acid (PHA) exfoliant/humectant
Gluconolactone is a polyhydroxy acid that gently exfoliates the skin surface, provides antioxidant and humectant benefits, and is often considered milder than alpha hydroxy acids. It is well tolerated, including by sensitive skin, due to its larger molecular size and slower penetration.
Lactic Acid Key active
Chemical exfoliant (AHA)
Lactic acid is an alpha-hydroxy acid that exfoliates the skin by loosening bonds between corneocytes, promoting cell turnover, and acting as a humectant to improve hydration, texture, and tone. It is commonly used at concentrations ranging from low (hydration) to higher peel-strength formulations.
Glycolic Acid Key active
Chemical exfoliant (AHA)
Glycolic acid is an alpha-hydroxy acid derived from sugar cane that exfoliates by loosening bonds between dead skin cells on the surface, promoting cell turnover and improving texture, tone, and fine lines. It is one of the smallest AHAs, allowing relatively deep penetration into the skin.
Cocamidopropyl Hydroxysultaine
Amphoteric surfactant / cleansing agent
Cocamidopropyl Hydroxysultaine is a mild amphoteric surfactant derived from coconut fatty acids, used in cleansers, shampoos, and body washes to provide gentle foaming, cleansing, and foam-boosting properties. It is often combined with primary surfactants to reduce overall irritancy.
Ethylhexylglycerin
Preservative booster / skin-conditioning agent
Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations.
Sodium Benzoate
Preservative
Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5.
Xanthan Gum
Thickener/stabilizer
Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects.
Calcium Gluconate
Buffering/skin-conditioning agent
Calcium gluconate is a calcium salt of gluconic acid used in topical formulations as a source of calcium, a buffering agent, and a skin-conditioning ingredient. It is also notably used medically as an antidote gel for hydrofluoric acid burns.
Amylopectin
Thickener / film-former
Amylopectin is a highly branched polysaccharide derived from starch, used in skincare as a natural thickening agent, film-former, and absorbent that imparts a smooth, mattifying feel to formulations. It is considered a base/formulation ingredient rather than an active treatment ingredient.
Dextrin
Thickener / absorbent / emulsion stabilizer
Dextrin is a polysaccharide derived from the partial hydrolysis of starch, commonly used in cosmetics as a thickening agent, absorbent, and binder to improve texture and stability of formulations. It is considered a formulation ingredient rather than an active treatment.
Polydextrose
Humectant / skin-conditioning agent
Polydextrose is a water-soluble glucose polymer used in skincare as a humectant and film-forming conditioning agent that helps hydrate and smooth the skin surface. It is also valued for its prebiotic potential to support the skin microbiome.
Phenoxyethanol
Preservative
Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment.
Tocopherol Key active
Antioxidant
Tocopherol (vitamin E) is a lipid-soluble antioxidant used in skincare to protect skin and formulations from oxidative damage caused by free radicals and UV exposure. It also functions as a skin-conditioning and emollient agent and can stabilize oils against rancidity.
Linalool
Fragrance/masking agent
Linalool is a naturally occurring terpene alcohol found in lavender, coriander, and many other plants, used in skincare primarily as a fragrance component. It readily oxidizes upon exposure to air, forming sensitizing hydroperoxides.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →