Below is every ingredient in Garnier Pure Exfoliating Face Wash explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Menthol is a naturally occurring or synthetic compound derived from mint oils that produces a cooling sensation by activating TRPM8 receptors on the skin. It is used in topical products for its soothing, mild analgesic, and antipruritic effects.
Salicylic acid is a lipid-soluble beta-hydroxy acid that exfoliates the skin surface and penetrates sebaceous pores to loosen and dissolve keratin and debris. It is widely used to treat acne, blackheads, and conditions involving thickened or scaly skin.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Skin dryness or tightness | Common | Due to its oil-absorbing properties, especially with overuse or on already dry skin. |
| Mild skin irritation or redness | Uncommon | Typically transient and related to overuse or sensitive skin. |
| Allergic contact dermatitis | Rare | Hypersensitivity reactions to kaolin or accompanying ingredients are infrequently reported. |
| Respiratory irritation from powder inhalation | Rare | Relevant mainly to loose powder formulations during application, not topical use. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Skin irritation or redness | Rare | Mild and uncommon, typically in sensitive individuals. |
| Pore congestion/comedogenicity | Rare | Possible in heavy occlusive products on acne-prone skin. |
| Microbial growth support if formulation poorly preserved | Rare | Starches can support microbial growth without adequate preservation. |
| Skin irritation | Uncommon | Generally well tolerated, but mild irritation can occur, particularly with high concentrations or compromised skin barrier. |
| Eye irritation | Uncommon | May cause stinging or irritation on direct eye contact, relevant in cleanser and shampoo formulations. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Kaolin Absorbent/clay cleanser | Kaolin is a naturally occurring soft white clay (hydrated aluminum silicate) used in skincare to absorb excess sebum, oil, and impurities. It is commonly found in face masks, cleansers, and powders as a mattifying and gentle exfoliating agent. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Zea Mays Starch Absorbent/anti-caking | Zea Mays Starch (corn starch) is a plant-derived powder used in cosmetics to absorb moisture and oil, provide a soft texture, and act as a bulking or anti-caking agent. It is generally considered safe and well-tolerated in topical formulations. |
| Decyl Glucoside Surfactant/Cleanser | Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants. |
| Sodium Laureth Sulfate Surfactant/cleansing agent | Sodium Laureth Sulfate (SLES) is an anionic surfactant widely used as a foaming and cleansing agent in shampoos, body washes, and facial cleansers. It is generally considered milder than Sodium Lauryl Sulfate due to ethoxylation. |
| PEG-7 Glyceryl Cocoate Emollient/surfactant | PEG-7 Glyceryl Cocoate is a polyethylene glycol derivative of glyceryl cocoate used as a mild nonionic surfactant, emollient, and emulsifier in cleansers and skincare formulations. It improves spreadability and helps solubilize oils while providing a gentle skin-conditioning effect. |
| Perlite Absorbent / opacifying agent | Perlite is a naturally occurring volcanic glass that, when heated, expands into a lightweight porous material used in cosmetics as an absorbent, bulking, and mattifying agent. It helps soak up excess oil and improve texture in powders, masks, and exfoliating formulations. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Trideceth-6 Surfactant/emulsifier | Trideceth-6 is a polyethylene glycol ether of tridecyl alcohol used as a nonionic surfactant, emulsifier, and solubilizer in cosmetic formulations. It helps blend oil and water phases and disperse fragrances or other oily components in water-based products. |
| PEG-30 Dipolyhydroxystearate Emulsifier | PEG-30 Dipolyhydroxystearate is a polyethylene glycol-based emulsifier used to stabilize water-in-oil emulsions in creams, sunscreens, and lotions. It functions as a formulation/base ingredient rather than a treatment active. |
| Sodium Citrate pH adjuster / chelating agent | Sodium citrate is the sodium salt of citric acid used in skincare primarily as a buffering agent to stabilize formulation pH and as a chelator that binds metal ions to improve product stability. It is a base/formulation ingredient rather than a therapeutic active. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Silica Absorbent/texturizer | Silica is a mineral-derived ingredient (silicon dioxide) used in cosmetics to absorb oil and sebum, improve texture, and act as a bulking, anti-caking, or matting agent. It is generally inert and well tolerated on skin. |
| Pumice Physical exfoliant / abrasive | Pumice is a porous volcanic rock used in ground form as a mechanical abrasive in scrubs, foot files, and exfoliating cleansers. It physically removes dead skin cells and calluses through friction rather than chemical action. |
| Cellulose Thickener / absorbent / texturizer | Cellulose is a plant-derived polysaccharide used in skincare as a thickening, stabilizing, and absorbent agent, and in exfoliant or film-forming roles. It is generally inert and well tolerated as a formulation base ingredient. |
| Microcrystalline Cellulose Texturizer/bulking agent | Microcrystalline cellulose is a purified, partially depolymerized cellulose derived from plant fibers, used in skincare and cosmetics as a bulking agent, texture modifier, anti-caking agent, and emulsion stabilizer. It is inert and primarily serves formulation purposes rather than providing active skin benefits. |
| Hydrogenated Castor Oil Emollient / emulsifier | Hydrogenated Castor Oil is a waxy, saturated derivative of castor oil produced by hydrogenation, used in skincare and cosmetics as an emollient, thickener, and emulsion stabilizer. It improves texture, provides skin conditioning, and helps stabilize formulations. |
| Hydrogenated Jojoba Oil Emollient / thickener | Hydrogenated Jojoba Oil is a hydrogenated derivative of jojoba seed oil, producing a waxy, solid material used as an emollient, thickener, and texture enhancer in cosmetic formulations. It helps soften skin, stabilize emulsions, and impart a smooth feel to creams, balms, and sticks. |
| Caprylyl Glycol Humectant / skin-conditioning agent and preservative booster | Caprylyl glycol is a multifunctional emollient and humectant derived from caprylic acid that helps hydrate skin and enhance the efficacy of preservatives in formulations. It is widely used as a stabilizing and conditioning base ingredient rather than a therapeutic active. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Menthol Key active Cooling agent / counterirritant | Menthol is a naturally occurring or synthetic compound derived from mint oils that produces a cooling sensation by activating TRPM8 receptors on the skin. It is used in topical products for its soothing, mild analgesic, and antipruritic effects. |
| Acrylates/C10-30 Alkyl Acrylate Crosspolymer Rheology modifier / emulsion stabilizer | Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic crosslinked acrylic polymer used to thicken, gel, and stabilize emulsions in skincare and cosmetic formulations. It helps suspend ingredients and provides a smooth, consistent texture without acting as a treatment active. |
| Salicylic Acid Key active Beta-hydroxy acid (BHA) exfoliant / keratolytic | Salicylic acid is a lipid-soluble beta-hydroxy acid that exfoliates the skin surface and penetrates sebaceous pores to loosen and dissolve keratin and debris. It is widely used to treat acne, blackheads, and conditions involving thickened or scaly skin. |
| Chlorphenesin Preservative / antimicrobial | Chlorphenesin is a synthetic antimicrobial agent used in cosmetics and skincare as a preservative to inhibit the growth of bacteria, yeast, and mold. It is also occasionally used for its mild muscle-relaxant and antifungal properties in topical formulations. |
| Linalool Fragrance/masking agent | Linalool is a naturally occurring terpene alcohol found in lavender, coriander, and many other plants, used in skincare primarily as a fragrance component. It readily oxidizes upon exposure to air, forming sensitizing hydroperoxides. |
| Limonene Fragrance/solvent | Limonene is a naturally occurring monoterpene derived from citrus peel oils, commonly used as a fragrance component and solvent in cosmetic formulations. On exposure to air it oxidizes, forming compounds with greater sensitizing potential. |
| Parfum Fragrance | Parfum (fragrance) is a blend of aromatic compounds added to cosmetic products to impart a pleasant scent or mask the base odor of other ingredients. It serves a sensory/formulation purpose rather than providing any skin benefit. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.