Below is every ingredient in Iunik Beta Glucan Barrier Sunscreen explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF.
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Drometrizole Trisiloxane (Mexoryl XL) is a broad-spectrum, photostable organic UV filter that absorbs both UVA and UVB radiation, used in sunscreens to provide photoprotection. Its silicone-based structure gives it oil solubility and substantivity on skin.
Terephthalylidene Dicamphor Sulfonic Acid (also known as ecamsule or Mexoryl SX) is a water-soluble organic UVA filter used in sunscreens to provide broad protection against UVA rays. It is photostable and often combined with other filters to enhance coverage.
Diethylhexyl Butamido Triazone (Iscotrizinol, Uvasorb HEB) is an organic, oil-soluble UVB filter that absorbs ultraviolet radiation primarily in the UVB range, providing photoprotection in sunscreen and daily-care formulations. It is highly photostable and substantive to skin, often combined with other filters for broad-spectrum coverage.
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin dryness or barrier disruption with excessive contact | Uncommon | Frequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss. |
| Irritation from impurities or hard water minerals | Rare | Reactions are attributed to contaminants, chlorine, or mineral content rather than water itself. |
| Mild skin irritation | Rare | Occasional transient redness or stinging, typically in sensitive skin. |
| Allergic contact dermatitis | Very rare | Isolated case reports; not a common sensitizer. |
| Eye irritation | Uncommon | Possible if product contacts the eyes during application. |
| Contact dermatitis / allergic sensitization | Very rare | Isolated reports; glycol-type diols are generally considered low sensitizers. |
| Contact irritation | Rare | Mild redness or stinging occasionally reported, generally well tolerated. |
| Photoallergic reaction | Very rare | Rarely reported given the molecule's high photostability and low systemic absorption. |
| Skin irritation or mild contact dermatitis | Rare | Occasional reports of localized redness or irritation, generally mild. |
| Allergic contact dermatitis / sensitization | Very rare | Isolated case reports; considered a low-sensitizing UV filter. |
| Contact irritation (mild stinging or redness) | Uncommon | Transient and typically mild, especially on sensitive skin. |
| Skin irritation (mild redness or stinging) | Uncommon | Generally well tolerated; transient irritation may occur, particularly at higher concentrations or on compromised skin. |
| Contact allergy / sensitization | Very rare | Rarely reported; salicylate derivatives can theoretically trigger sensitization in predisposed individuals. |
| Skin irritation | Rare | Mild irritation possible, generally well tolerated. |
| Comedogenicity | Rare | Low comedogenic potential; pore clogging rarely reported in sensitive individuals. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| Dibutyl Adipate Emollient / solvent | Dibutyl Adipate is a synthetic ester of adipic acid and butanol used in cosmetics as an emollient, solvent, and skin-conditioning agent. It imparts a light, non-greasy feel and helps spread and dissolve UV filters and other oil-soluble ingredients. |
| 2,3-Butanediol Humectant / solvent | 2,3-Butanediol is a small diol used in cosmetics primarily as a humectant and solvent that helps retain moisture and aid the dissolution of other ingredients. It also offers mild antimicrobial properties that can support product preservation. |
| Ethylhexyl Triazone Key active UVB sunscreen filter | Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF. |
| Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active UVA filter (sunscreen) | Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens. |
| Drometrizole Trisiloxane Key active UV filter (UVA/UVB) | Drometrizole Trisiloxane (Mexoryl XL) is a broad-spectrum, photostable organic UV filter that absorbs both UVA and UVB radiation, used in sunscreens to provide photoprotection. Its silicone-based structure gives it oil solubility and substantivity on skin. |
| Terephthalylidene Dicamphor Sulfonic Acid Key active UV filter (sunscreen) | Terephthalylidene Dicamphor Sulfonic Acid (also known as ecamsule or Mexoryl SX) is a water-soluble organic UVA filter used in sunscreens to provide broad protection against UVA rays. It is photostable and often combined with other filters to enhance coverage. |
| 1,2-Hexanediol Humectant / preservative booster | 1,2-Hexanediol is a synthetic diol used in skincare as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, often allowing reduced or preservative-free systems. It helps maintain product stability while contributing mild moisturizing properties. |
| Butyloctyl Salicylate Emollient / UV filter solubilizer | Butyloctyl Salicylate is a lipophilic salicylate ester used in cosmetic formulations primarily as an emollient and as a solubilizer that enhances the dissolution and stability of organic UV filters in sunscreens. It also provides mild spreadability and a smooth skin feel. |
| Behenyl Alcohol Emollient / Thickener | Behenyl alcohol is a fatty alcohol derived from behenic acid that functions as an emollient, thickening agent, and emulsion stabilizer in cosmetic and skincare formulations. It helps soften the skin and improve product texture and stability. |
| Tromethamine pH adjuster / buffering agent | Tromethamine (trometamol, TRIS) is an organic amine base used in cosmetic and topical formulations to neutralize acidic components and stabilize pH. It functions primarily as a buffering and neutralizing agent rather than as a therapeutic active. |
| Diethylhexyl Butamido Triazone Key active UVB filter (sunscreen agent) | Diethylhexyl Butamido Triazone (Iscotrizinol, Uvasorb HEB) is an organic, oil-soluble UVB filter that absorbs ultraviolet radiation primarily in the UVB range, providing photoprotection in sunscreen and daily-care formulations. It is highly photostable and substantive to skin, often combined with other filters for broad-spectrum coverage. |
| Diisopropyl Sebacate Emollient / solvent | Diisopropyl sebacate is an ester used as a lightweight emollient and solvent in cosmetic formulations, providing skin conditioning and improving the spreadability and penetration of other ingredients. It imparts a smooth, non-greasy feel and can act as a vehicle for active compounds. |
| Vinyl Dimethicone Silicone emollient/film-former | Vinyl Dimethicone is a vinyl-functionalized silicone polymer used in skincare and cosmetics as an emollient, conditioning agent, and film-former that imparts a smooth, silky feel and can act as a crosslinker in silicone elastomer systems. It is a formulation/base ingredient rather than a therapeutic active. |
| Arachidyl Alcohol Emollient / emulsion stabilizer | Arachidyl alcohol is a fatty alcohol (C20) derived from natural oils that functions as an emollient, thickener, and co-emulsifier to stabilize creams and lotions. It improves texture and helps maintain emulsion consistency in skincare formulations. |
| Acrylates/C10-30 Alkyl Acrylate Crosspolymer Rheology modifier / emulsion stabilizer | Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic crosslinked acrylic polymer used to thicken, gel, and stabilize emulsions in skincare and cosmetic formulations. It helps suspend ingredients and provides a smooth, consistent texture without acting as a treatment active. |
| Methyl Methacrylate Crosspolymer Texture enhancer / mattifying agent | Methyl Methacrylate Crosspolymer is a synthetic polymer used in cosmetics as a film-former and oil-absorbing powder that imparts a smooth, soft-focus, matte feel to formulations. It functions primarily as a sensory and texturizing base ingredient rather than a skin-treatment active. |
| Caprylyl Methicone Emollient / spreading agent | Caprylyl Methicone is a volatile silicone fluid used in cosmetic formulations to provide a light, non-greasy, smooth skin feel and to enhance the spreadability of products. It also acts as a solvent and carrier for other ingredients, particularly in sunscreens and color cosmetics. |
| Batyl Alcohol Emollient / skin-conditioning agent | Batyl alcohol is a naturally derived glyceryl ether (monooctadecyl glyceryl ether) used in skincare primarily as an emollient and skin-conditioning agent that helps soften skin and stabilize formulations. It is generally considered well tolerated and functions as a base/formulation ingredient rather than a therapeutic active. |
| Stearic Acid Emulsifier / thickener | Stearic acid is a saturated long-chain fatty acid widely used in cosmetics as an emulsifier, thickening agent, and emollient to stabilize creams and lotions. It is generally considered a base/formulation ingredient rather than a therapeutic active. |
| Sodium Polyacryloyldimethyl Taurate Emulsifier / thickener | Sodium Polyacryloyldimethyl Taurate is a synthetic acrylate-based polymer used as a thickening, stabilizing, and emulsifying agent in cosmetic formulations. It helps create smooth, gel-like textures and stabilizes oil-in-water emulsions. |
| Arachidyl Glucoside Emulsifier / surfactant | Arachidyl Glucoside is a non-ionic, plant-derived emulsifier created from fatty alcohols and glucose, used to stabilize oil-in-water emulsions and improve texture. It functions as a formulation aid rather than a treatment active. |
| Polyacrylate Crosspolymer-6 Film-forming/sensory-enhancing rheology modifier | Polyacrylate Crosspolymer-6 is a synthetic crosslinked acrylate polymer used in skincare and cosmetic formulations to provide a smooth, silky sensory feel, stabilize emulsions, and help form a light film on the skin. It is a formulation aid rather than a biologically active treatment ingredient. |
| Stearyl Alcohol Emollient/emulsifier | Stearyl alcohol is a fatty alcohol used in skincare as an emollient, emulsion stabilizer, and thickening agent to improve texture and prevent ingredient separation. It softens skin and helps maintain the consistency of creams and lotions. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Panthenol Humectant / skin-conditioning agent | Panthenol (provitamin B5) is converted to pantothenic acid in the skin, where it acts as a humectant and helps support skin barrier function and hydration. It is also used for its soothing and mild anti-inflammatory properties in topical formulations. |
| Lecithin Emollient / Emulsifier | Lecithin is a naturally occurring phospholipid (commonly derived from soybean or egg) used in skincare as an emulsifier, emollient, and penetration enhancer. It helps stabilize oil-and-water formulations and supports the skin barrier by mimicking natural lipids. |
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Microcrystalline Cellulose Texturizer/bulking agent | Microcrystalline cellulose is a purified, partially depolymerized cellulose derived from plant fibers, used in skincare and cosmetics as a bulking agent, texture modifier, anti-caking agent, and emulsion stabilizer. It is inert and primarily serves formulation purposes rather than providing active skin benefits. |
| Cellulose Gum Thickener/stabilizer | Cellulose Gum (carboxymethyl cellulose) is a water-soluble cellulose derivative used as a thickening, stabilizing, and binding agent in cosmetic formulations. It helps control viscosity and improve texture in creams, gels, and lotions. |
| Glucose Humectant/skin-conditioning agent | Glucose is a simple sugar used in skincare primarily as a humectant and skin-conditioning ingredient, helping to attract and retain moisture in the skin. It can also serve as a substrate in formulations and contributes to the skin's natural moisturizing factors. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Beta-Glucan Key active Hydrating soothing agent | Beta-glucan is a polysaccharide derived from sources such as oats, yeast, and mushrooms that functions as a humectant and skin-soothing ingredient. It supports hydration, helps reinforce the skin barrier, and has been studied for antioxidant and wound-healing properties. |
| Maltodextrin Carrier/film-forming agent | Maltodextrin is a polysaccharide derived from starch hydrolysis, used in skincare primarily as a carrier, bulking agent, film former, and stabilizer for active ingredients and powders. It also helps improve texture and can act as a mild thickening or emulsion-stabilizing aid. |
| Chlorella Ferment Key active Skin-conditioning / antioxidant | Chlorella Ferment is a microalgae-derived fermented extract used in skincare for its antioxidant, hydrating, and skin-conditioning properties. It supplies peptides, amino acids, and polysaccharides that may support skin barrier function and moisture retention. |
| Lactobacillus Ferment Key active Probiotic-derived skin conditioning/soothing agent | Lactobacillus Ferment is a postbiotic ingredient produced by the fermentation of Lactobacillus bacteria, used in skincare for its soothing, barrier-supporting, and antioxidant properties. It may help balance the skin microbiome and reduce visible signs of irritation. |
| Panax Ginseng Extract Key active Antioxidant/Skin-conditioning | Panax ginseng extract is a botanical derived from the ginseng root, rich in ginsenosides and polysaccharides, used in skincare for its antioxidant, anti-inflammatory, and skin-conditioning properties. It may support improved skin tone and is sometimes studied for anti-aging effects. |
| Sodium Benzoate Preservative | Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5. |
| Glyceryl Caprylate Emollient / antimicrobial co-preservative | Glyceryl Caprylate is a monoglyceride derived from glycerin and caprylic acid, used in skincare as an emollient, moisturizing agent, and skin-conditioning component with mild antimicrobial properties that support preservation. It is commonly employed to help stabilize formulations and reduce reliance on conventional preservatives. |
| Acetyl Hexapeptide-8 Key active Anti-wrinkle peptide | Acetyl Hexapeptide-8 (also known as Argireline or acetyl hexapeptide-3) is a synthetic peptide that mimics the N-terminal end of SNAP-25, mildly inhibiting neurotransmitter release to reduce the appearance of expression lines. It is marketed as a topical alternative to injectable neuromodulators, though its effects are subtler. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.