Below is every ingredient in La Shield Pollution Protect Mineral Sunscreen Gel Spf 50 explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Octinoxate (octyl methoxycinnamate) is an organic UVB-absorbing filter used in sunscreens and cosmetic products to help protect skin from ultraviolet-induced damage. It is one of the most widely used chemical UV filters in topical formulations.
Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations.
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection.
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Diethylhexyl Butamido Triazone (Iscotrizinol, Uvasorb HEB) is an organic, oil-soluble UVB filter that absorbs ultraviolet radiation primarily in the UVB range, providing photoprotection in sunscreen and daily-care formulations. It is highly photostable and substantive to skin, often combined with other filters for broad-spectrum coverage.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin dryness or barrier disruption with excessive contact | Uncommon | Frequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss. |
| Irritation from impurities or hard water minerals | Rare | Reactions are attributed to contaminants, chlorine, or mineral content rather than water itself. |
| Contact irritation or mild stinging | Uncommon | Transient redness or stinging, particularly on sensitive or compromised skin. |
| Allergic contact dermatitis | Rare | Sensitization reactions reported in patch-testing studies. |
| Photoallergic or photocontact dermatitis | Rare | Reaction triggered by combined exposure to the ingredient and sunlight. |
| Potential endocrine-disrupting (estrogenic) activity | Rare | Observed mainly in in vitro and animal studies; relevance to human topical use is debated. |
| White cast / cosmetic residue on skin | Common | Non-micronized particles can leave a visible white film, especially on darker skin tones. |
| Dryness or mild skin tightness | Uncommon | Due to its astringent nature, particularly in high concentrations. |
| Clogged pores / acne aggravation | Uncommon | More often attributed to occlusive base ingredients than to zinc oxide itself. |
| Contact irritation or stinging | Rare | Generally well tolerated; irritation often relates to other formulation components. |
| White cast on skin | Common | Cosmetic effect, more pronounced on deeper skin tones and with non-micronized grades. |
| Skin dryness or mild irritation | Uncommon | Usually related to the overall formulation rather than the ingredient itself. |
| Contact dermatitis or allergic reaction | Rare | Titanium dioxide is a recognized low-sensitizing ingredient; reactions are infrequent. |
| Comedogenicity / clogged pores | Rare | Can occur in some individuals depending on coating and formulation base. |
| Inhalation-related respiratory concern | Very rare | Relevant only to loose powder/spray forms via inhalation, not topical leave-on use. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| Octinoxate Key active UV filter (chemical sunscreen) | Octinoxate (octyl methoxycinnamate) is an organic UVB-absorbing filter used in sunscreens and cosmetic products to help protect skin from ultraviolet-induced damage. It is one of the most widely used chemical UV filters in topical formulations. |
| Zinc Oxide Key active UV filter / skin protectant | Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations. |
| Titanium Dioxide Key active UV filter / mineral sunscreen | Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin. |
| Diisopropyl Sebacate Emollient / solvent | Diisopropyl sebacate is an ester used as a lightweight emollient and solvent in cosmetic formulations, providing skin conditioning and improving the spreadability and penetration of other ingredients. It imparts a smooth, non-greasy feel and can act as a vehicle for active compounds. |
| Propylene Glycol Dicaprylate/Dicaprate Emollient/skin-conditioning agent | Propylene Glycol Dicaprylate/Dicaprate is a diester of propylene glycol and caprylic/capric fatty acids used as an emollient, solvent, and skin-conditioning agent in cosmetic formulations. It imparts a light, non-greasy feel and helps soften skin while aiding the dispersion of other ingredients. |
| Caprylyl Methicone Emollient / spreading agent | Caprylyl Methicone is a volatile silicone fluid used in cosmetic formulations to provide a light, non-greasy, smooth skin feel and to enhance the spreadability of products. It also acts as a solvent and carrier for other ingredients, particularly in sunscreens and color cosmetics. |
| C12-15 Alkyl Benzoate Emollient / texture enhancer | C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active. |
| Diisopropyl Adipate Emollient/solvent | Diisopropyl adipate is a lightweight synthetic diester used as an emollient and solvent in cosmetic formulations. It enhances spreadability, skin feel, and helps dissolve other ingredients without leaving a greasy residue. |
| Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine Key active UV filter (sunscreen) | Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection. |
| Cetearyl Alcohol Emollient/emulsifier | Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions. |
| Brassica Campestris/Aleurites Fordi Oil Copolymer film former / emollient | Brassica Campestris/Aleurites Fordi Oil Copolymer is a plant-derived copolymer made from rapeseed (Brassica campestris) and tung (Aleurites fordii) oils, used in cosmetics primarily as a film-forming agent and emollient. It helps impart gloss, water resistance, and a smooth conditioning feel, and is commonly found in lip products, color cosmetics, and skin-care formulations. |
| Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active UVA filter (sunscreen) | Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens. |
| Diethylhexyl Butamido Triazone Key active UVB filter (sunscreen agent) | Diethylhexyl Butamido Triazone (Iscotrizinol, Uvasorb HEB) is an organic, oil-soluble UVB filter that absorbs ultraviolet radiation primarily in the UVB range, providing photoprotection in sunscreen and daily-care formulations. It is highly photostable and substantive to skin, often combined with other filters for broad-spectrum coverage. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| C20-22 Alkyl Phosphate Emulsifier / co-emulsifier | C20-22 Alkyl Phosphate is a phosphate ester of long-chain fatty alcohols used primarily as an emulsifier and stabilizer to form smooth, stable oil-in-water creams and lotions. It is a formulation/base ingredient rather than a treatment active. |
| Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer Emulsifier/stabilizer (thickener) | Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer is a synthetic acrylate-based polymer used to thicken, stabilize, and emulsify cosmetic formulations, creating smooth gel and cream textures. It is widely employed as a rheology modifier and is not a therapeutic active. |
| Coco-Glucoside Mild surfactant/cleanser | Coco Glucoside is a gentle, plant-derived nonionic surfactant (an alkyl polyglucoside made from coconut fatty alcohols and glucose) used as a cleansing and foaming agent in face washes, shampoos, and body cleansers. It is valued for its mildness, biodegradability, and good skin and eye tolerance compared with harsher surfactants. |
| C20-22 Alcohols Emollient/thickener | C20-22 Alcohols are a blend of long-chain fatty alcohols used in skincare as emollients, emulsion stabilizers, and viscosity-increasing agents. They impart a smooth, conditioning texture and help bind oil and water phases in creams and lotions. |
| Isohexadecane Emollient / solvent | Isohexadecane is a synthetic, branched-chain hydrocarbon (saturated isoparaffin) used as a lightweight emollient, solvent, and spreading agent in cosmetic formulations. It imparts a silky, non-greasy feel and helps disperse pigments and other ingredients. |
| Parfum Fragrance | Parfum (fragrance) is a blend of aromatic compounds added to cosmetic products to impart a pleasant scent or mask the base odor of other ingredients. It serves a sensory/formulation purpose rather than providing any skin benefit. |
| Aluminium Hydroxide Opacifier/colorant; mild absorbent | Aluminium hydroxide is an inorganic compound used in skincare primarily as an opacifying agent, white pigment coating, and absorbent. It also serves as a coating for pigments such as titanium dioxide and as a mild astringent in some formulations. |
| Stearic Acid Emulsifier / thickener | Stearic acid is a saturated long-chain fatty acid widely used in cosmetics as an emulsifier, thickening agent, and emollient to stabilize creams and lotions. It is generally considered a base/formulation ingredient rather than a therapeutic active. |
| Caprylyl/Capryl Glucoside Surfactant/cleanser | Caprylyl/Capryl Glucoside is a mild, biodegradable nonionic surfactant derived from coconut/palm-based fatty alcohols and glucose, used as a gentle cleansing and foaming agent. It is valued for its low irritation potential and suitability for sensitive-skin and baby cleansing formulations. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Polysorbate 60 Emulsifier / surfactant | Polysorbate 60 is a nonionic surfactant and emulsifier derived from sorbitol and stearic acid, used to blend oil and water phases and stabilize emulsions in creams and lotions. It functions as a formulation aid rather than a therapeutic active. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Triethanolamine pH adjuster / emulsifier | Triethanolamine is an organic compound used in cosmetic formulations primarily to adjust pH and to act as an emulsifying agent, helping to stabilize mixtures of oil and water. It is typically present in small concentrations as a formulation aid rather than a therapeutic active. |
| Disodium Edta Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Sorbitan Isostearate Emulsifier / surfactant | Sorbitan isostearate is a sorbitan ester of isostearic acid used as a nonionic emulsifier and stabilizer in oil-in-water and water-in-oil cosmetic formulations. It helps blend oil and water phases and improves texture and spreadability. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.