Below is every ingredient in Maybelline New York Fit Me Bb Nude Glow Bb Cream explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Homosalate is an organic (chemical) UV filter primarily absorbing UVB radiation, commonly used in sunscreens to help prevent sunburn. It is often combined with other filters as it is relatively unstable and offers limited UVA protection on its own.
Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF.
Ethylhexyl Salicylate (octisalate) is an oil-soluble organic UVB filter used in sunscreens to absorb ultraviolet radiation in the 295-315 nm range. It is also valued as a solvent that helps stabilize and dissolve other UV filters in formulations.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Adenosine is a nucleoside that signals through cell-surface receptors to promote dermal fibroblast activity and collagen/elastin production, helping reduce the appearance of fine lines and wrinkles. It also has anti-inflammatory and soothing properties at low concentrations commonly used in cosmetics (around 0.04-0.1%).
Camellia Sinensis Leaf Extract (green tea extract) is derived from the leaves of the tea plant and is rich in polyphenols, particularly catechins like EGCG. It is used in skincare for its antioxidant, anti-inflammatory, and soothing properties.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin irritation | Very rare | Purified water itself is essentially non-irritating; reactions are typically due to other formulation components or contamination. |
| Allergic/sensitivity reaction | Very rare | True allergy to water is exceedingly rare; aquagenic conditions are a separate medical phenomenon unrelated to standard cosmetic water. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Contact irritation or stinging | Uncommon | Mild transient irritation, especially around the eyes or on sensitive skin. |
| Allergic contact dermatitis | Rare | Sensitization reactions confirmed by patch testing are infrequent. |
| Photoallergic/photocontact reaction | Rare | Reaction triggered by sun exposure after application. |
| Potential endocrine activity | Very rare | Weak estrogenic effects observed in laboratory/animal studies; human clinical relevance at typical use levels remains under regulatory review. |
| Contact dermatitis / skin irritation | Uncommon | Localized redness, itching, or stinging on application. |
| Photoallergic contact dermatitis | Rare | Reported particularly in adults, sometimes linked to prior ketoprofen sensitization. |
| Systemic absorption | Common | Detectable in blood after use; clinical significance unclear and not equated with harm. |
| Benzophenone formation over time | Uncommon | Degradation can yield trace benzophenone; relevance to skin health under study. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua/Water Solvent/base | Aqua (water) is the most common base ingredient in skincare formulations, acting as a solvent and dispersing medium for other ingredients. It hydrates and forms the vehicle in which actives and emulsions are carried. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Homosalate Key active UV filter (sunscreen) | Homosalate is an organic (chemical) UV filter primarily absorbing UVB radiation, commonly used in sunscreens to help prevent sunburn. It is often combined with other filters as it is relatively unstable and offers limited UVA protection on its own. |
| Octocrylene Key active UV filter | Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF. |
| Ethylhexyl Salicylate Key active UV filter (UVB sunscreen) | Ethylhexyl Salicylate (octisalate) is an oil-soluble organic UVB filter used in sunscreens to absorb ultraviolet radiation in the 295-315 nm range. It is also valued as a solvent that helps stabilize and dissolve other UV filters in formulations. |
| Caprylyl Methicone Emollient / spreading agent | Caprylyl Methicone is a volatile silicone fluid used in cosmetic formulations to provide a light, non-greasy, smooth skin feel and to enhance the spreadability of products. It also acts as a solvent and carrier for other ingredients, particularly in sunscreens and color cosmetics. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Butyloctyl Salicylate Emollient / UV filter solubilizer | Butyloctyl Salicylate is a lipophilic salicylate ester used in cosmetic formulations primarily as an emollient and as a solubilizer that enhances the dissolution and stability of organic UV filters in sunscreens. It also provides mild spreadability and a smooth skin feel. |
| Cetyl PEG/PPG-10/1 Dimethicone Emulsifier | Cetyl PEG/PPG-10/1 Dimethicone is a silicone-based nonionic emulsifier used primarily to stabilize water-in-silicone and water-in-oil emulsions in cosmetic formulations. It helps create stable, lightweight textures in products like foundations, sunscreens, and creams. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Dimethicone/PEG-10/15 Crosspolymer Emulsifier / film-former | Dimethicone/PEG-10/15 Crosspolymer is a silicone-based crosspolymer used as a water-in-silicone emulsifier and texture enhancer in cosmetic formulations. It helps stabilize emulsions and impart a smooth, silky feel to the skin. |
| Synthetic Fluorphlogopite Cosmetic colorant/pearlescent base | Synthetic Fluorphlogopite is a lab-made synthetic mica used as a substrate for pearlescent and shimmer pigments in cosmetics, valued for its high purity, smooth texture, and consistent light-reflecting properties. It functions as a base or carrier ingredient rather than a skin-active. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Sodium Chloride Thickener / viscosity adjuster | Sodium chloride (table salt) is commonly used in cosmetics as a thickening and viscosity-control agent, particularly in surfactant-based cleansers, and also acts as a mild abrasive in scrubs. It is generally well tolerated and considered a formulation ingredient rather than a treatment active. |
| Trimethylsiloxysilicate Film-former/silicone resin | Trimethylsiloxysilicate is a silicone-based film-forming resin used in cosmetics to impart water resistance, transfer resistance, and long-wear properties to products like sunscreens, foundations, and lip products. It forms a flexible, breathable film on the skin surface. |
| Disteardimonium Hectorite Rheology modifier / suspending agent | Disteardimonium Hectorite is a modified clay (quaternized hectorite) used in cosmetic formulations as a thickener and gellant, primarily in anhydrous and oil-based systems such as sunscreens, foundations, and lipsticks. It helps suspend pigments and prevent ingredient separation. |
| Disodium Stearoyl Glutamate Emulsifier / surfactant | Disodium Stearoyl Glutamate is an amino acid-derived (glutamic acid and stearic acid) anionic emulsifier and mild surfactant used to blend oil and water phases and stabilize formulations. It is valued for being gentle and well-tolerated, commonly found in lotions, creams, and cleansers. |
| Chlorphenesin Preservative / antimicrobial | Chlorphenesin is a synthetic antimicrobial agent used in cosmetics and skincare as a preservative to inhibit the growth of bacteria, yeast, and mold. It is also occasionally used for its mild muscle-relaxant and antifungal properties in topical formulations. |
| Caprylyl Glycol Humectant / skin-conditioning agent and preservative booster | Caprylyl glycol is a multifunctional emollient and humectant derived from caprylic acid that helps hydrate skin and enhance the efficacy of preservatives in formulations. It is widely used as a stabilizing and conditioning base ingredient rather than a therapeutic active. |
| Silica Silylate Absorbent / mattifying agent | Silica Silylate is a hydrophobic, silylated form of silica used in cosmetics as an oil-absorbing, texture-modifying, and matting agent. It helps control shine, improves slip and powder feel, and stabilizes formulations. |
| Trisodium Ethylenediamine Disuccinate Chelating agent | Trisodium Ethylenediamine Disuccinate (Trisodium Ethylenediamine Disuccinate, or HEDTA-type biodegradable chelator) is a biodegradable chelating agent used to bind metal ions in cosmetic formulations. By sequestering trace metals, it helps stabilize products, prevent discoloration and rancidity, and enhance the efficacy of preservatives and antioxidants. |
| Simethicone Anti-foaming agent / skin-conditioning emollient | Simethicone is a silicone-based defoaming and skin-conditioning ingredient used in cosmetic formulations to reduce surface foam and impart a smooth, protective feel. It is generally considered inert and non-irritating on skin. |
| Maltodextrin Carrier/film-forming agent | Maltodextrin is a polysaccharide derived from starch hydrolysis, used in skincare primarily as a carrier, bulking agent, film former, and stabilizer for active ingredients and powders. It also helps improve texture and can act as a mild thickening or emulsion-stabilizing aid. |
| Aluminum Hydroxide Opacifier/colorant & skin protectant | Aluminum hydroxide is an inorganic compound used in cosmetics primarily as an opacifying agent, mild absorbent, and coating for pigments (such as in sunscreens and color cosmetics). It can also act as a buffering and skin-protectant ingredient in some topical formulations. |
| Adenosine Key active Anti-aging/soothing active | Adenosine is a nucleoside that signals through cell-surface receptors to promote dermal fibroblast activity and collagen/elastin production, helping reduce the appearance of fine lines and wrinkles. It also has anti-inflammatory and soothing properties at low concentrations commonly used in cosmetics (around 0.04-0.1%). |
| Dipropylene Glycol Solvent/humectant | Dipropylene glycol is a clear, low-viscosity glycol used in cosmetics primarily as a solvent, humectant, and viscosity-reducing agent. It helps dissolve fragrances and other ingredients while contributing mild moisture-retention properties. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Citric Acid pH adjuster / AHA exfoliant | Citric acid is an alpha-hydroxy acid derived from citrus fruits, used primarily to adjust and buffer formulation pH and as a chelating agent, and at higher concentrations as a mild chemical exfoliant. It can promote surface cell turnover and is sometimes included in antioxidant or brightening products. |
| Sodium Citrate pH adjuster / chelating agent | Sodium citrate is the sodium salt of citric acid used in skincare primarily as a buffering agent to stabilize formulation pH and as a chelator that binds metal ions to improve product stability. It is a base/formulation ingredient rather than a therapeutic active. |
| Camellia Sinensis Leaf Extract Key active Antioxidant | Camellia Sinensis Leaf Extract (green tea extract) is derived from the leaves of the tea plant and is rich in polyphenols, particularly catechins like EGCG. It is used in skincare for its antioxidant, anti-inflammatory, and soothing properties. |
| Tocopherol Key active Antioxidant | Tocopherol (vitamin E) is a lipid-soluble antioxidant used in skincare to protect skin and formulations from oxidative damage caused by free radicals and UV exposure. It also functions as a skin-conditioning and emollient agent and can stabilize oils against rancidity. |
| Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate Antioxidant/stabilizer | Pentaerythrityl Tetra-di-t-butyl Hydroxyhydrocinnamate is a hindered-phenol antioxidant (also known as the industrial stabilizer Irganox 1010) used in cosmetic formulations to prevent oxidation and rancidity of oils, fats, and other ingredients. It functions primarily as a formulation stabilizer rather than a skin-active treatment. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.