Below is every ingredient in Minimalist 2Percent Salicylic Acid Face Serum For Blackheads Whiteheads explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Salicylic acid is a lipid-soluble beta-hydroxy acid that exfoliates the skin surface and penetrates sebaceous pores to loosen and dissolve keratin and debris. It is widely used to treat acne, blackheads, and conditions involving thickened or scaly skin.
Marrubium Vulgare (white horehound) extract is a plant-derived ingredient used in skincare for its antioxidant, anti-inflammatory, and skin-conditioning properties. It is often included to help protect against environmental stress and soothe irritated skin.
Epigallocatechin Gallatyl Glucoside is a glucoside-stabilized derivative of EGCG, a green tea-derived polyphenol, used in topical formulations for its antioxidant and free-radical-scavenging properties. The glucoside modification improves stability and water solubility compared to native EGCG.
Lactic acid is an alpha-hydroxy acid that exfoliates the skin by loosening bonds between corneocytes, promoting cell turnover, and acting as a humectant to improve hydration, texture, and tone. It is commonly used at concentrations ranging from low (hydration) to higher peel-strength formulations.
Oligopeptide-10 is a synthetic peptide derived from antimicrobial peptide sequences that exhibits activity against Propionibacterium acnes (Cutibacterium acnes), making it useful in acne-targeted and preservative-boosting formulations. It is valued for reducing bacterial load while being gentler than some conventional antibacterial actives.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Mild transient stinging or irritation | Uncommon | More likely on compromised or sensitive skin, often due to its penetration-enhancing properties |
| Contact dermatitis or allergic sensitization | Rare | Glycol-type ingredients are generally low sensitizers but reactions are occasionally reported |
| Redness or dryness | Rare | Typically associated with high concentrations or already irritated skin |
| Allergic contact dermatitis | Rare | Documented in patch-test studies but considered a relatively weak sensitizer. |
| Redness or itching | Rare | Typically resolves after discontinuation. |
| Mild skin irritation | Uncommon | Possible at higher concentrations, particularly on sensitive or compromised skin. |
| Enhanced irritation from co-formulated actives | Uncommon | By increasing penetration, it may intensify the effects or irritation potential of other ingredients. |
| Eye irritation | Rare | Can occur with accidental contact in concentrated form. |
| Mild skin irritation or stinging | Uncommon | May occur at higher concentrations or on compromised/sensitive skin. |
| Increased penetration-related irritation from co-formulated actives | Uncommon | By enhancing delivery, DMI can amplify irritancy of other ingredients in the product. |
| Transient erythema (redness) | Rare | Usually mild and self-resolving. |
| Skin dryness and peeling | Common | Mild flaking or tightness, especially with frequent use or higher concentrations. |
| Stinging, burning, or irritation | Common | Transient sensation on application, often more pronounced on sensitive or compromised skin. |
| Erythema (redness) | Common | Temporary redness at the application site. |
| Contact dermatitis | Uncommon | Localized inflammation; can be irritant or, less often, allergic in nature. |
| Increased photosensitivity | Uncommon | Exfoliation may heighten sun sensitivity; sunscreen use is advised. |
| Salicylism (systemic toxicity) | Rare | Reported with extensive application over large body areas, high concentrations, or occlusion; symptoms include nausea, tinnitus, and dizziness. |
| Severe allergic reaction | Very rare | Hypersensitivity reactions such as significant swelling or hives. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Methylpropanediol Humectant/solvent | Methylpropanediol is a small glycol-type ingredient used in skincare as a humectant and solvent that helps hydrate skin and enhance the penetration of other actives. It also contributes to product texture and can support preservative efficacy. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Ethoxydiglycol Solvent / penetration enhancer | Ethoxydiglycol (diethylene glycol monoethyl ether) is a glycol ether used in cosmetic formulations primarily as a solvent and viscosity reducer that helps dissolve active ingredients and improve their skin penetration. It is considered a formulation aid rather than a therapeutic active. |
| Dimethyl Isosorbide Solvent / penetration enhancer | Dimethyl Isosorbide (DMI) is a small, polar solvent derived from isosorbide used in cosmetic formulations to dissolve active ingredients and enhance their penetration into the skin. It functions as a vehicle and carrier rather than a therapeutic active itself. |
| Salicylic Acid Key active Beta-hydroxy acid (BHA) exfoliant / keratolytic | Salicylic acid is a lipid-soluble beta-hydroxy acid that exfoliates the skin surface and penetrates sebaceous pores to loosen and dissolve keratin and debris. It is widely used to treat acne, blackheads, and conditions involving thickened or scaly skin. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Marrubium Vulgare Extract Key active Antioxidant / Soothing | Marrubium Vulgare (white horehound) extract is a plant-derived ingredient used in skincare for its antioxidant, anti-inflammatory, and skin-conditioning properties. It is often included to help protect against environmental stress and soothe irritated skin. |
| Pentylene Glycol Humectant / solvent / preservative-booster | Pentylene glycol is a glycol used in cosmetics as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, helping reduce reliance on traditional preservatives. It improves skin hydration and aids the delivery and stability of other ingredients. |
| Polylysine Antimicrobial preservative | Polylysine (ε-polylysine) is a naturally derived cationic peptide used in skincare primarily as a preservative and antimicrobial agent due to its ability to disrupt microbial cell membranes. It is valued as a gentle, biodegradable alternative to synthetic preservatives in cosmetic formulations. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Epigallocatechin Gallatyl Glucoside Key active Antioxidant | Epigallocatechin Gallatyl Glucoside is a glucoside-stabilized derivative of EGCG, a green tea-derived polyphenol, used in topical formulations for its antioxidant and free-radical-scavenging properties. The glucoside modification improves stability and water solubility compared to native EGCG. |
| Hydroxyethylcellulose Thickener/viscosity modifier | Hydroxyethylcellulose is a non-ionic, water-soluble cellulose derivative used to thicken, stabilize, and adjust the texture of aqueous cosmetic formulations. It functions as a gelling and film-forming agent rather than providing a direct biological skin benefit. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Lecithin Emollient / Emulsifier | Lecithin is a naturally occurring phospholipid (commonly derived from soybean or egg) used in skincare as an emulsifier, emollient, and penetration enhancer. It helps stabilize oil-and-water formulations and supports the skin barrier by mimicking natural lipids. |
| Sclerotium Gum Thickener / stabilizer | Sclerotium Gum is a natural polysaccharide produced by fermentation of the fungus Sclerotium rolfsii, used as a thickening, gelling, and emulsion-stabilizing agent in cosmetic formulations. It also imparts a smooth skin feel and helps suspend particles in creams, gels, and serums. |
| Pullulan Film-forming agent / texturizer | Pullulan is a naturally derived polysaccharide produced by fermentation of starch by the fungus Aureobasidium pullulans. In skincare it forms a thin, breathable film on the skin, providing a temporary tightening or smoothing effect and helping to stabilize formulations. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Lactic Acid Key active Chemical exfoliant (AHA) | Lactic acid is an alpha-hydroxy acid that exfoliates the skin by loosening bonds between corneocytes, promoting cell turnover, and acting as a humectant to improve hydration, texture, and tone. It is commonly used at concentrations ranging from low (hydration) to higher peel-strength formulations. |
| Isoceteth-20 Surfactant / emulsifier | Isoceteth-20 is a nonionic surfactant and emulsifier derived from ethoxylated isocetyl alcohol, used to solubilize oils and stabilize emulsions in cosmetic formulations. It functions as a base/formulation ingredient rather than a treatment active. |
| Trisodium Ethylenediamine Disuccinate Chelating agent | Trisodium Ethylenediamine Disuccinate (Trisodium Ethylenediamine Disuccinate, or HEDTA-type biodegradable chelator) is a biodegradable chelating agent used to bind metal ions in cosmetic formulations. By sequestering trace metals, it helps stabilize products, prevent discoloration and rancidity, and enhance the efficacy of preservatives and antioxidants. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Oligopeptide-10 Key active Antimicrobial peptide / anti-acne agent | Oligopeptide-10 is a synthetic peptide derived from antimicrobial peptide sequences that exhibits activity against Propionibacterium acnes (Cutibacterium acnes), making it useful in acne-targeted and preservative-boosting formulations. It is valued for reducing bacterial load while being gentler than some conventional antibacterial actives. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.