Below is every ingredient in Simple Day Cream Night Cream Water Boost Hydration Heros explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Benzophenone-4 (sulisobenzone) is a water-soluble organic UV filter that absorbs UVB and short UVA radiation, helping protect skin and formulations from sun-induced damage. It is also used to prevent UV degradation of product ingredients and color.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Mild skin irritation or redness | Rare | Generally considered non-irritating; occasional mild reactions reported. |
| Clogged pores / comedogenic-related breakouts | Uncommon | Often anecdotal; dimethicone is largely regarded as non-comedogenic but may trap debris if skin is not cleansed well. |
| Allergic contact dermatitis | Very rare | True silicone allergy is exceptionally uncommon. |
| Eye irritation on accidental contact | Rare | Transient stinging or discomfort if product enters the eyes. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
| Redness or itching | Rare | Typically resolves after discontinuation. |
| Mild skin irritation | Rare | Occasional reports, generally well tolerated on intact skin. |
| Contact allergy/sensitization | Very rare | Polymeric structure makes sensitization uncommon; isolated case reports only. |
| Transient stinging on sensitive skin | Very rare | Usually related to overall formulation rather than the polymer itself. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Ammonium Acryloyldimethyltaurate/VP Copolymer Thickener/stabilizer | Ammonium Acryloyldimethyltaurate/VP Copolymer is a synthetic acrylic copolymer used in skincare to thicken, gel, and stabilize emulsions, providing viscosity control and a smooth texture. It functions as a rheology modifier and film former rather than a biologically active treatment ingredient. |
| Isohexadecane Emollient / solvent | Isohexadecane is a synthetic, branched-chain hydrocarbon (saturated isoparaffin) used as a lightweight emollient, solvent, and spreading agent in cosmetic formulations. It imparts a silky, non-greasy feel and helps disperse pigments and other ingredients. |
| Saccharide Isomerate Humectant / moisturizer | Saccharide Isomerate is a plant-derived carbohydrate complex that binds to the skin's keratin to provide long-lasting hydration and improve moisture retention. It is structurally similar to carbohydrates naturally found in the skin's upper layers. |
| Dimethicone/Vinyl Dimethicone Crosspolymer Silicone elastomer / texture enhancer | Dimethicone Vinyl Dimethicone Crosspolymer is a crosslinked silicone elastomer used in skincare and cosmetics to impart a silky, smooth feel, absorb excess oil, blur the appearance of pores and fine lines, and improve product spreadability. It functions as a formulation/sensory agent rather than a biologically active treatment ingredient. |
| C12-14 Sec-Pareth-12 Surfactant/Emulsifier | C12-14 Sec-Pareth-12 is a polyethylene glycol ether of secondary alcohols used as a nonionic surfactant, emulsifier, and wetting agent in cosmetic and personal care formulations. It helps solubilize and stabilize ingredients and improves spreadability rather than providing a direct therapeutic effect. |
| Chlorphenesin Preservative / antimicrobial | Chlorphenesin is a synthetic antimicrobial agent used in cosmetics and skincare as a preservative to inhibit the growth of bacteria, yeast, and mold. It is also occasionally used for its mild muscle-relaxant and antifungal properties in topical formulations. |
| Dimethiconol Emollient/silicone conditioning agent | Dimethiconol is a silicone-based polymer used in skincare and haircare to provide smoothing, conditioning, and a soft, non-greasy emollient feel. It forms a thin, breathable film that reduces moisture loss and improves spreadability of formulations. |
| Linoleamidopropyl PG-Dimonium Chloride Phosphate Conditioning agent / antistatic | Linoleamidopropyl PG-Dimonium Chloride Phosphate is a phospholipid-derived quaternary ammonium compound used in skincare and haircare as a conditioning, antistatic, and emulsifying agent. It helps soften skin and hair, reduce static, and improve the spreadability and feel of formulations. |
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Caprylyl Glycol Humectant / skin-conditioning agent and preservative booster | Caprylyl glycol is a multifunctional emollient and humectant derived from caprylic acid that helps hydrate skin and enhance the efficacy of preservatives in formulations. It is widely used as a stabilizing and conditioning base ingredient rather than a therapeutic active. |
| Cetearyl Alcohol Emollient/emulsifier | Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions. |
| Cetearyl Glucoside Emulsifier | Cetearyl Glucoside is a plant-derived (glucose and fatty alcohol) nonionic emulsifier used to blend oil and water phases and stabilize creams and lotions. It is valued for being mild and well-tolerated in cosmetic formulations. |
| Ammonium Acryloyldimethyltaurate/Beheneth-25 Methacrylate Crosspolymer Rheology modifier / thickener | Ammonium Acryloyldimethyltaurate/Beheneth-25 Methacrylate Crosspolymer is a synthetic crosslinked copolymer used to thicken, stabilize, and emulsify aqueous cosmetic formulations. It provides smooth texture and suspension properties in creams, gels, and lotions. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Benzophenone-4 Key active UV filter (sunscreen agent) | Benzophenone-4 (sulisobenzone) is a water-soluble organic UV filter that absorbs UVB and short UVA radiation, helping protect skin and formulations from sun-induced damage. It is also used to prevent UV degradation of product ingredients and color. |
| Sodium PCA Humectant | Sodium PCA (sodium pyrrolidone carboxylic acid) is the sodium salt of pyroglutamic acid and a component of the skin's natural moisturizing factor (NMF). It is widely used in cosmetics as a water-binding humectant to hydrate and soften the skin. |
| Stearic Acid Emulsifier / thickener | Stearic acid is a saturated long-chain fatty acid widely used in cosmetics as an emulsifier, thickening agent, and emollient to stabilize creams and lotions. It is generally considered a base/formulation ingredient rather than a therapeutic active. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Butylated Hydroxytoluene Antioxidant/preservative | Butylated Hydroxytoluene (BHT) is a synthetic antioxidant used in cosmetic formulations to prevent oxidation and rancidity of oils and fats, helping maintain product stability and shelf life. It functions as a stabilizer rather than a therapeutic active. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Potassium Chloride Viscosity/texture modifier & osmotic agent | Potassium chloride is a mineral salt used in cosmetic formulations primarily as a viscosity-controlling agent and to balance the osmotic and electrolyte properties of aqueous products. It is generally considered safe and non-active at the concentrations used in skincare. |
| Sodium Chloride Thickener / viscosity adjuster | Sodium chloride (table salt) is commonly used in cosmetics as a thickening and viscosity-control agent, particularly in surfactant-based cleansers, and also acts as a mild abrasive in scrubs. It is generally well tolerated and considered a formulation ingredient rather than a treatment active. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.