Below is every ingredient in Suganda Total Defence Sunscreen Spf 50 Pa explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF.
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Physalis Angulata Extract is a plant-derived ingredient used in skincare for its antioxidant, anti-inflammatory, and skin-conditioning properties, often included to help calm and protect the skin. It contains compounds such as physalins and flavonoids that may help mitigate oxidative stress.
Bisabolol is a naturally derived (typically from chamomile) or synthetic terpene alcohol used in skincare for its anti-inflammatory, soothing, and skin-conditioning properties. It is also reported to enhance penetration of other ingredients and offers mild antimicrobial activity.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Skin irritation | Rare | Generally well tolerated; mild irritation possible in sensitive individuals. |
| Allergic contact dermatitis | Rare | Uncommon sensitization reactions reported, sometimes linked to benzoate component. |
| Comedogenicity / breakouts | Uncommon | Low comedogenic potential but may contribute to clogged pores in acne-prone skin. |
| Contact urticaria | Very rare | Isolated reports of hive-like reactions tied to benzoate moiety. |
| Mild skin irritation or stinging | Common | More likely at higher concentrations or on compromised/sensitive skin |
| Irritant contact dermatitis | Uncommon | Non-allergic irritation, often dose-dependent |
| Worsening of pre-existing eczema or barrier-impaired skin | Rare | Penetration-enhancing effect may increase reactivity |
| Systemic toxicity from topical use | Very rare | Reported mainly with extensive application on broken skin, especially in infants or burn patients |
| Mild skin dryness | Uncommon | Due to oil-absorbing properties, particularly in high concentrations or on already dry skin. |
| Skin irritation or sensitivity | Rare | Occasional mild irritation reported, more likely with compromised skin barrier. |
| Respiratory irritation from inhalation of loose powder | Rare | Relevant mainly to powdered formulations; crystalline silica inhalation is a concern, but cosmetic-grade amorphous silica poses minimal risk. |
| Skin irritation or mild contact dermatitis | Rare | Occasional reports of localized redness or irritation, generally mild. |
| Allergic contact dermatitis / sensitization | Very rare | Isolated case reports; considered a low-sensitizing UV filter. |
| Photoallergic reaction | Very rare | Uncommon given its photostability, but possible in sensitive individuals. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| C12-15 Alkyl Benzoate Emollient / texture enhancer | C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Silica Absorbent/texturizer | Silica is a mineral-derived ingredient (silicon dioxide) used in cosmetics to absorb oil and sebum, improve texture, and act as a bulking, anti-caking, or matting agent. It is generally inert and well tolerated on skin. |
| Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active UVA filter (sunscreen) | Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens. |
| Ethylhexyl Triazone Key active UVB sunscreen filter | Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF. |
| Methylene Bis-Benzotriazolyl Tetramethylbutylphenol Key active UV filter (broad-spectrum) | Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Glyceryl Monostearate Emulsifier / emollient | Glyceryl monostearate is a non-ionic emulsifier and thickening agent widely used in creams and lotions to blend oil and water phases and improve texture. It also provides mild skin-conditioning and emollient properties. |
| Cyclopentasiloxane Emollient/silicone | Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations. |
| Cetearyl Olivate Emulsifier / emollient | Cetearyl Olivate is an olive oil-derived emulsifier and emollient, typically used with Sorbitan Olivate, that helps blend oil and water phases while conditioning and softening the skin. It supports the skin barrier and gives formulations a light, non-greasy feel. |
| Sodium Palmitoyl Proline Skin-conditioning agent / amino acid derivative emollient | Sodium Palmitoyl Proline is the sodium salt of palmitic acid linked to the amino acid proline, used in skincare as a skin-conditioning and emollient agent that supports the skin barrier and provides a smooth feel. It is often included as part of lipoamino acid blends (such as with sarcosine derivatives) for soothing and moisturizing effects. |
| Nymphaea Alba Flower Extract Soothing antioxidant | Nymphaea Alba (white water lily) flower extract is a botanical ingredient used in cosmetics for its antioxidant, soothing, and skin-conditioning properties. It is rich in flavonoids and tannins thought to help calm irritation and protect against oxidative stress. |
| Physalis Angulata Extract Key active Antioxidant/soothing botanical extract | Physalis Angulata Extract is a plant-derived ingredient used in skincare for its antioxidant, anti-inflammatory, and skin-conditioning properties, often included to help calm and protect the skin. It contains compounds such as physalins and flavonoids that may help mitigate oxidative stress. |
| Bisabolol Key active Soothing/anti-inflammatory agent | Bisabolol is a naturally derived (typically from chamomile) or synthetic terpene alcohol used in skincare for its anti-inflammatory, soothing, and skin-conditioning properties. It is also reported to enhance penetration of other ingredients and offers mild antimicrobial activity. |
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Cetyl Alcohol Emollient / emulsifier | Cetyl alcohol is a fatty alcohol used in skincare and cosmetics as an emollient, thickener, and emulsion stabilizer. It softens skin and helps maintain the consistency and texture of creams and lotions. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Sodium Hyaluronate Crosspolymer Humectant / hydrating agent | Sodium Hyaluronate Crosspolymer is a chemically cross-linked form of sodium hyaluronate that forms a hydrated network, providing enhanced moisture retention and longer-lasting surface hydration compared to standard hyaluronic acid. It is widely used in moisturizers, serums, and masks to plump and smooth the skin surface. |
| Ammonium Acryloyldimethyltaurate/VP Copolymer Thickener/stabilizer | Ammonium Acryloyldimethyltaurate/VP Copolymer is a synthetic acrylic copolymer used in skincare to thicken, gel, and stabilize emulsions, providing viscosity control and a smooth texture. It functions as a rheology modifier and film former rather than a biologically active treatment ingredient. |
| Decyl Glucoside Surfactant/Cleanser | Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants. |
| Tocopherol Key active Antioxidant | Tocopherol (vitamin E) is a lipid-soluble antioxidant used in skincare to protect skin and formulations from oxidative damage caused by free radicals and UV exposure. It also functions as a skin-conditioning and emollient agent and can stabilize oils against rancidity. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.