Below is every ingredient in Sunscoop Hydrating Fluid Sunscreen For Face And Body With Spf 60 Pa explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Ethylhexyl Salicylate (octisalate) is an oil-soluble organic UVB filter used in sunscreens to absorb ultraviolet radiation in the 295-315 nm range. It is also valued as a solvent that helps stabilize and dissolve other UV filters in formulations.
Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure.
Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF.
Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations.
Menthol is a naturally occurring or synthetic compound derived from mint oils that produces a cooling sensation by activating TRPM8 receptors on the skin. It is used in topical products for its soothing, mild analgesic, and antipruritic effects.
Ethyl Menthane Carboxamide (commonly known as WS-3) is a synthetic menthol derivative used to impart a long-lasting cooling sensation without the strong odor or volatility of menthol. It is frequently found in aftershaves, lip products, scalp treatments, and soothing skincare formulations.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin dryness or barrier disruption with excessive contact | Uncommon | Frequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss. |
| Irritation from impurities or hard water minerals | Rare | Reactions are attributed to contaminants, chlorine, or mineral content rather than water itself. |
| Mild skin irritation or stinging | Uncommon | Generally well tolerated; transient irritation can occur, particularly on sensitive or compromised skin. |
| Allergic contact dermatitis | Rare | Salicylate-based filters are considered a relatively infrequent cause of contact sensitization. |
| Photoallergic or photocontact reactions | Rare | Reported occasionally with organic UV filters; less common than with some other sunscreen agents. |
| Eye irritation on accidental contact | Uncommon | Can cause stinging if the product migrates into the eyes. |
| Contact allergic reaction (allergic contact dermatitis) | Rare | Avobenzone is a recognized but uncommon cause of sunscreen allergy. |
| Photoallergic or photocontact dermatitis | Rare | Reactions triggered or worsened by sun exposure have been reported. |
| Skin irritation, redness, or stinging | Uncommon | Mild transient irritation may occur, particularly on sensitive or broken skin. |
| Eye irritation | Uncommon | Can cause stinging if the product migrates into the eyes. |
| Contact dermatitis / skin irritation | Uncommon | Localized redness, itching, or stinging on application. |
| Photoallergic contact dermatitis | Rare | Reported particularly in adults, sometimes linked to prior ketoprofen sensitization. |
| Systemic absorption | Common | Detectable in blood after use; clinical significance unclear and not equated with harm. |
| Benzophenone formation over time | Uncommon | Degradation can yield trace benzophenone; relevance to skin health under study. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| Ethylhexyl Salicylate Key active UV filter (UVB sunscreen) | Ethylhexyl Salicylate (octisalate) is an oil-soluble organic UVB filter used in sunscreens to absorb ultraviolet radiation in the 295-315 nm range. It is also valued as a solvent that helps stabilize and dissolve other UV filters in formulations. |
| Butyl Methoxydibenzoylmethane Key active UV filter (UVA sunscreen) | Butyl Methoxydibenzoylmethane, also known as avobenzone, is a widely used organic sunscreen agent that absorbs UVA radiation. It is often combined with photostabilizers and other UV filters because it can degrade with sun exposure. |
| Octocrylene Key active UV filter | Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Betaine Humectant / osmolyte | Betaine is a naturally derived amino acid derivative (trimethylglycine) used in skincare as a humectant and osmoprotectant that attracts and retains moisture while helping stabilize skin barrier function. It also improves the texture and mildness of formulations. |
| Coco-Caprylate Emollient / skin-conditioning agent | Coco-Caprylate is a lightweight ester emollient derived from coconut-based fatty alcohols and caprylic acid, used to impart a silky, non-greasy spreadable feel in skincare and cosmetic formulations. It functions as a natural-origin alternative to silicones, softening and conditioning the skin surface. |
| Zinc Oxide Key active UV filter / skin protectant | Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations. |
| Stearic Acid Emulsifier / thickener | Stearic acid is a saturated long-chain fatty acid widely used in cosmetics as an emulsifier, thickening agent, and emollient to stabilize creams and lotions. It is generally considered a base/formulation ingredient rather than a therapeutic active. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Cetyl Alcohol Emollient / emulsifier | Cetyl alcohol is a fatty alcohol used in skincare and cosmetics as an emollient, thickener, and emulsion stabilizer. It softens skin and helps maintain the consistency and texture of creams and lotions. |
| Glyceryl Stearate Emulsifier/emollient | Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active. |
| Ammonium Acryloyldimethyltaurate/VP Copolymer Thickener/stabilizer | Ammonium Acryloyldimethyltaurate/VP Copolymer is a synthetic acrylic copolymer used in skincare to thicken, gel, and stabilize emulsions, providing viscosity control and a smooth texture. It functions as a rheology modifier and film former rather than a biologically active treatment ingredient. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Menthol Key active Cooling agent / counterirritant | Menthol is a naturally occurring or synthetic compound derived from mint oils that produces a cooling sensation by activating TRPM8 receptors on the skin. It is used in topical products for its soothing, mild analgesic, and antipruritic effects. |
| Methyl Diisopropyl Propionamide Cooling agent | Methyl Diisopropyl Propionamide is a synthetic, non-menthol cooling agent that triggers a sensation of coolness on skin without the strong odor or irritation of menthol. It is commonly used in aftershaves, deodorants, and cosmetic formulations to impart a refreshing feel. |
| Ethyl Menthane Carboxamide Key active Cooling agent | Ethyl Menthane Carboxamide (commonly known as WS-3) is a synthetic menthol derivative used to impart a long-lasting cooling sensation without the strong odor or volatility of menthol. It is frequently found in aftershaves, lip products, scalp treatments, and soothing skincare formulations. |
| Menthyl Lactate Cooling agent / sensory modifier | Menthyl lactate is a menthol derivative (the lactate ester of menthol) used in skincare and personal care products to provide a cooling sensation without the strong odor or irritation associated with menthol. It functions primarily as a sensory additive rather than a therapeutic active. |
| Hydroxypropyl Cellulose Film-former / thickener | Hydroxypropyl cellulose is a water-soluble cellulose derivative used in cosmetics and topical formulations as a thickening agent, film former, emulsion stabilizer, and binder. It helps control viscosity and texture and forms a flexible protective film on skin. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Aloe Barbadensis Leaf Extract Soothing/moisturizing agent | Aloe Barbadensis Leaf Extract is derived from the aloe vera plant and is used in skincare for its hydrating, soothing, and mild anti-inflammatory properties. It is commonly included as a supportive base ingredient rather than a primary treatment active. |
| Chamomilla Recutita Flower Extract Key active Soothing/anti-inflammatory botanical extract | Chamomilla Recutita (German chamomile) flower extract is a plant-derived ingredient used in skincare for its soothing, anti-inflammatory, and antioxidant properties, attributed to compounds such as bisabolol, chamazulene, and flavonoids. It is commonly added to formulations intended to calm sensitive, irritated, or reddened skin. |
| Avena Sativa Kernel Extract Key active Soothing / anti-irritant | Avena Sativa (oat) Kernel Extract is derived from oat seeds and is used in skincare for its soothing, anti-inflammatory, and skin-barrier-supporting properties, largely attributed to avenanthramides, beta-glucans, and saponins. It is commonly incorporated to calm irritation, reduce itching, and improve hydration in sensitive or compromised skin. |
| Milk Extract Skin conditioning / soothing agent | Milk extract is a naturally derived ingredient containing lactic acid, proteins, lipids, and vitamins, used in skincare for mild moisturizing, soothing, and gentle exfoliating effects. It is typically employed as a conditioning and humectant component rather than a high-potency active. |
| Caesalpinia Spinosa Fruit Extract Skin conditioning / film-forming humectant | Caesalpinia spinosa (tara) fruit extract is a polysaccharide-rich botanical used in skincare for its film-forming, moisturizing, and skin-smoothing properties, often providing an immediate tightening or 'tensor' effect. It is sometimes combined with other gums or sugars to support hydration and improve skin texture. |
| Helianthus Annuus Sprout Extract Key active Antioxidant/skin-conditioning | Helianthus Annuus (sunflower) Sprout Extract is a plant-derived ingredient rich in antioxidants, peptides, and phytonutrients used in skincare to support skin conditioning and protect against oxidative stress. It is often included for its moisturizing and soothing properties. |
| Citrus Aurantium Dulcis Peel Oil Fragrance/flavoring agent | Citrus Aurantium Dulcis (sweet orange) Peel Oil is a cold-pressed essential oil from orange peel used primarily as a natural fragrance and masking agent in cosmetic formulations. It contains limonene as a major constituent along with other terpenes. |
| Rosmarinus Officinalis Leaf Oil Antioxidant / fragrance / antimicrobial | Rosmarinus Officinalis Leaf Oil (rosemary essential oil) is a plant-derived oil used in skincare for its antioxidant, antimicrobial, and aromatic properties. It is rich in compounds such as 1,8-cineole, camphor, and carnosic acid. |
| Sodium Benzoate Preservative | Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.