Below is every ingredient in The Ordinary Natural Moisturizing Factors Beta Glucan explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Beta-glucan is a polysaccharide derived from sources such as oats, yeast, and mushrooms that functions as a humectant and skin-soothing ingredient. It supports hydration, helps reinforce the skin barrier, and has been studied for antioxidant and wound-healing properties.
Urea is a naturally occurring component of the skin's natural moisturizing factor that hydrates by attracting and retaining water; at higher concentrations it also softens and exfoliates thickened or scaly skin. It is widely used to treat dry skin conditions such as xerosis, ichthyosis, and hyperkeratosis.
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Tocopherol (vitamin E) is a lipid-soluble antioxidant used in skincare to protect skin and formulations from oxidative damage caused by free radicals and UV exposure. It also functions as a skin-conditioning and emollient agent and can stabilize oils against rancidity.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Mild skin irritation | Rare | Generally considered low-irritation; occasional mild reactions in sensitive individuals. |
| Allergic contact dermatitis | Very rare | Isolated sensitization reports; not a common allergen. |
| Eye irritation | Uncommon | Possible transient stinging if product contacts the eyes, depending on concentration. |
| Enhanced penetration of co-formulated irritants | Uncommon | As a penetration enhancer it may increase absorption and irritation potential of other actives. |
| Mild transient stinging or irritation | Rare | Generally very well tolerated; minor irritation reported mostly on compromised skin |
| Redness or tingling | Rare | Typically resolves quickly after discontinuation |
| Mild transient irritation or redness | Rare | Generally well tolerated; occasional sensitivity reported in susceptible individuals. |
| Stinging on compromised or broken skin | Rare | Typically mild and short-lived. |
| Contact allergy / allergic dermatitis | Very rare | Isolated sensitization reports; uncommon for amino acids |
| Redness or itching | Rare | Generally mild and resolves on discontinuation |
| Mild transient irritation or stinging | Rare | Possible on compromised or sensitive skin, usually minor and temporary |
| Contact allergic reaction | Very rare | Allergic sensitization to glycine is uncommon and seldom reported |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| PPG-24-Glycereth-24 Emulsifier/solubilizer | PPG-24-Glycereth-24 is a polypropylene glycol and glycereth-derived nonionic surfactant used in cosmetic formulations as a solubilizer, emulsifier, and humectant. It helps disperse oils and fragrances into water-based products and contributes to texture and stability. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Betaine Humectant / osmolyte | Betaine is a naturally derived amino acid derivative (trimethylglycine) used in skincare as a humectant and osmoprotectant that attracts and retains moisture while helping stabilize skin barrier function. It also improves the texture and mildness of formulations. |
| Beta-Glucan Key active Hydrating soothing agent | Beta-glucan is a polysaccharide derived from sources such as oats, yeast, and mushrooms that functions as a humectant and skin-soothing ingredient. It supports hydration, helps reinforce the skin barrier, and has been studied for antioxidant and wound-healing properties. |
| Arginine Amino acid / pH adjuster & conditioning agent | Arginine is a basic amino acid used in skincare primarily as a pH buffer/neutralizer and humectant-like conditioning agent that supports skin hydration and barrier function. It is generally well tolerated and often paired with acidic ingredients to balance formulation pH. |
| Glycine Amino acid / humectant | Glycine is a small amino acid used in skincare as a humectant and conditioning agent, supporting skin hydration and acting as a building block for collagen and natural moisturizing factor. It is generally considered well-tolerated and is often included as part of moisturizing or barrier-support formulations. |
| Alanine Amino acid / humectant | Alanine is a small non-essential amino acid used in skincare as a humectant and component of the skin's natural moisturizing factor (NMF), helping to maintain hydration and support the skin barrier. It is also used as a buffering agent and to improve the feel of formulations. |
| Serine Humectant / amino acid | Serine is a naturally occurring amino acid and component of the skin's natural moisturizing factor (NMF), used in skincare to support hydration and help maintain the skin barrier. It is typically incorporated as a conditioning and water-binding agent rather than a clinical treatment active. |
| Proline Amino acid / skin-conditioning agent | Proline is a non-essential amino acid and a key component of collagen, used in skincare as a humectant and skin-conditioning agent to support hydration and the skin barrier. It is generally well tolerated and often included in formulations for its moisturizing and structural-protein-supporting properties. |
| Threonine Amino acid / skin conditioning agent | Threonine is an essential amino acid used in skincare primarily as a humectant and skin-conditioning agent, helping support hydration and the skin's natural moisturizing factor. It is also a building block for proteins such as collagen and elastin. |
| Glutamic Acid Humectant / amino acid | Glutamic acid is a naturally occurring amino acid used in skincare as a humectant and component of the skin's natural moisturizing factor (NMF), helping to maintain hydration and support the skin barrier. It is also used as a pH adjuster and in some formulations to enhance moisturization. |
| Lysine Hcl Conditioning/amino acid | Lysine HCl is the hydrochloride salt of the essential amino acid L-lysine, used in skincare primarily as a skin-conditioning and humectant agent that supports the skin's natural moisturizing factor and protein structure. It is generally considered a supportive formulation ingredient rather than a clinically proven active. |
| Glucose Humectant/skin-conditioning agent | Glucose is a simple sugar used in skincare primarily as a humectant and skin-conditioning ingredient, helping to attract and retain moisture in the skin. It can also serve as a substrate in formulations and contributes to the skin's natural moisturizing factors. |
| Maltose Humectant / skin-conditioning agent | Maltose is a disaccharide sugar used in skincare primarily as a humectant and skin-conditioning agent, helping to attract and retain moisture in the stratum corneum. It is generally considered a low-risk, well-tolerated formulation ingredient rather than a therapeutic active. |
| Fructose Humectant | Fructose is a simple monosaccharide sugar used in skincare primarily as a humectant that attracts and binds water to help maintain skin hydration. It is generally considered a supporting/base ingredient rather than a therapeutic active. |
| Trehalose Humectant / moisturizer | Trehalose is a naturally occurring disaccharide used in skincare as a humectant and protective agent, helping retain moisture and stabilize cell membranes and proteins against dehydration and oxidative stress. It is well tolerated and commonly used to support skin barrier hydration. |
| Xylitol Humectant / moisturizer | Xylitol is a sugar alcohol used in topical formulations as a humectant that helps attract and retain moisture in the skin, and it may support the skin's microbiome and barrier function. It is generally well tolerated and considered safe for topical use. |
| Anhydroxylitol Humectant / moisturizing agent | Anhydroxylitol is a sugar-derived (xylitol) humectant used in skincare to attract and retain water, helping to maintain skin hydration and barrier function. It is often combined with xylitol and xylitylglucoside to enhance the skin's natural moisturizing factors. |
| Xylitylglucoside Humectant / moisturizer | Xylitylglucoside is a sugar-derived humectant, typically used in combination with anhydroxylitol and xylitol, that helps attract and retain water in the skin and supports the skin barrier. It is valued for its skin-hydrating and moisturizing properties in cosmetic formulations. |
| Sodium PCA Humectant | Sodium PCA (sodium pyrrolidone carboxylic acid) is the sodium salt of pyroglutamic acid and a component of the skin's natural moisturizing factor (NMF). It is widely used in cosmetics as a water-binding humectant to hydrate and soften the skin. |
| PCA Humectant / NMF component | PCA (pyrrolidone carboxylic acid), often as sodium PCA, is a naturally occurring component of skin's natural moisturizing factor (NMF) that attracts and binds water to the stratum corneum. It is used in skincare to improve hydration and skin softness. |
| Sodium Lactate Humectant / NMF component | Sodium lactate is the sodium salt of lactic acid and a key component of skin's natural moisturizing factor (NMF), used to hydrate the skin and buffer formulation pH. It also has mild exfoliating and humectant properties that help maintain skin moisture and barrier function. |
| Urea Key active Humectant / keratolytic | Urea is a naturally occurring component of the skin's natural moisturizing factor that hydrates by attracting and retaining water; at higher concentrations it also softens and exfoliates thickened or scaly skin. It is widely used to treat dry skin conditions such as xerosis, ichthyosis, and hyperkeratosis. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Phospholipids Emollient / skin-conditioning agent and liposome-forming emulsifier | Phospholipids are amphiphilic lipids (commonly derived from soy or egg lecithin) used in skincare to form liposomes, stabilize emulsions, and reinforce the skin barrier. They also enhance penetration and delivery of other actives. |
| Sphingolipids Skin barrier lipid / moisturizer | Sphingolipids are a class of lipids, including ceramides, that are naturally present in the stratum corneum and help maintain the skin barrier and reduce transepidermal water loss. In topical formulations they are used to restore barrier function and improve hydration in dry or compromised skin. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Pentylene Glycol Humectant / solvent / preservative-booster | Pentylene glycol is a glycol used in cosmetics as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, helping reduce reliance on traditional preservatives. It improves skin hydration and aids the delivery and stability of other ingredients. |
| Acrylates/C10-30 Alkyl Acrylate Crosspolymer Rheology modifier / emulsion stabilizer | Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic crosslinked acrylic polymer used to thicken, gel, and stabilize emulsions in skincare and cosmetic formulations. It helps suspend ingredients and provides a smooth, consistent texture without acting as a treatment active. |
| Sodium Hydroxide pH adjuster | Sodium hydroxide (lye) is a strong alkaline compound used in small amounts to adjust and stabilize the pH of cosmetic formulations. At regulated low concentrations in finished products it is considered safe, though it is corrosive in concentrated form. |
| Sodium Chloride Thickener / viscosity adjuster | Sodium chloride (table salt) is commonly used in cosmetics as a thickening and viscosity-control agent, particularly in surfactant-based cleansers, and also acts as a mild abrasive in scrubs. It is generally well tolerated and considered a formulation ingredient rather than a treatment active. |
| Sodium Citrate pH adjuster / chelating agent | Sodium citrate is the sodium salt of citric acid used in skincare primarily as a buffering agent to stabilize formulation pH and as a chelator that binds metal ions to improve product stability. It is a base/formulation ingredient rather than a therapeutic active. |
| Citric Acid pH adjuster / AHA exfoliant | Citric acid is an alpha-hydroxy acid derived from citrus fruits, used primarily to adjust and buffer formulation pH and as a chelating agent, and at higher concentrations as a mild chemical exfoliant. It can promote surface cell turnover and is sometimes included in antioxidant or brightening products. |
| Tocopherol Key active Antioxidant | Tocopherol (vitamin E) is a lipid-soluble antioxidant used in skincare to protect skin and formulations from oxidative damage caused by free radicals and UV exposure. It also functions as a skin-conditioning and emollient agent and can stabilize oils against rancidity. |
| P-Anisic Acid Preservative / antimicrobial | P-Anisic acid is a naturally occurring phenolic acid (found in anise) used in cosmetics primarily as a preservative, antimicrobial, and skin-conditioning agent. It is often included in 'natural' preservative systems and may offer mild antioxidant and brightening properties. |
| Aminomethyl Propanol pH adjuster / neutralizer | Aminomethyl Propanol (AMP) is an alkaline organic amine used to adjust and buffer the pH of cosmetic formulations, commonly neutralizing acidic gelling agents like carbomers to thicken or stabilize products. It functions as a formulation aid rather than a skin-treatment active. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Chlorphenesin Preservative / antimicrobial | Chlorphenesin is a synthetic antimicrobial agent used in cosmetics and skincare as a preservative to inhibit the growth of bacteria, yeast, and mold. It is also occasionally used for its mild muscle-relaxant and antifungal properties in topical formulations. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.