Below is every ingredient in The Pink Foundry 72Hr Waterlight Gel Moisturiser With 1Percent Hyaluronic Acid explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Mild skin irritation or redness | Rare | Generally considered non-irritating; occasional mild reactions reported. |
| Clogged pores / comedogenic-related breakouts | Uncommon | Often anecdotal; dimethicone is largely regarded as non-comedogenic but may trap debris if skin is not cleansed well. |
| Allergic contact dermatitis | Very rare | True silicone allergy is exceptionally uncommon. |
| Eye irritation on accidental contact | Rare | Transient stinging or discomfort if product enters the eyes. |
| Mild transient flushing or redness | Uncommon | More likely at higher concentrations or in sensitive skin; usually subsides quickly. |
| Tingling, stinging, or burning sensation | Uncommon | Often associated with higher percentages or compromised barrier. |
| Contact irritation or itching | Rare | Generally dose-dependent and resolves with discontinuation. |
| Mild transient stinging or irritation | Uncommon | More likely on broken or compromised skin or at high concentrations. |
| Redness or itching | Rare | Typically resolves after discontinuation. |
| Mild skin irritation | Rare | Occasional transient redness or stinging, typically in sensitive skin. |
| Contact allergy/sensitization | Very rare | Allergic contact dermatitis is uncommonly reported for this class of saccharide esters. |
| Clogged pores/breakouts | Very rare | Low comedogenic potential; isolated reports in acne-prone individuals. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Dicapryl Saccharide Isomerate Emollient/humectant | Dicapryl Saccharide Isomerate is a plant-derived saccharide ester used as a skin-conditioning emollient and humectant that helps soften skin and support moisture retention. It functions primarily as a formulation/texture-enhancing ingredient rather than a therapeutic active. |
| Sodium Hyaluronate Crosspolymer Humectant / hydrating agent | Sodium Hyaluronate Crosspolymer is a chemically cross-linked form of sodium hyaluronate that forms a hydrated network, providing enhanced moisture retention and longer-lasting surface hydration compared to standard hyaluronic acid. It is widely used in moisturizers, serums, and masks to plump and smooth the skin surface. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Sodium Acetylated Hyaluronate Humectant / moisturizer | Sodium Acetylated Hyaluronate is an acetylated, sodium-salt derivative of hyaluronic acid used in skincare for its enhanced moisture retention and improved skin adherence compared to standard hyaluronic acid. The acetyl modification increases lipophilicity, allowing better surface binding and prolonged hydration. |
| Hydrolyzed Sodium Hyaluronate Humectant / hydrating agent | Hydrolyzed sodium hyaluronate is an enzymatically or chemically fragmented, low-molecular-weight form of sodium hyaluronate used in skincare to attract and bind water. Its smaller size allows better penetration into the upper layers of the skin compared to high-molecular-weight hyaluronic acid, supporting surface hydration and a smoother appearance. |
| Pentylene Glycol Humectant / solvent / preservative-booster | Pentylene glycol is a glycol used in cosmetics as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, helping reduce reliance on traditional preservatives. It improves skin hydration and aids the delivery and stability of other ingredients. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Sodium Polyacrylate Thickener / absorbent | Sodium polyacrylate is a superabsorbent acrylic-acid polymer used in skincare as a thickening, stabilizing, and water-binding agent that can hold large amounts of liquid to create gel-like textures. It functions as a formulation and texture-enhancing ingredient rather than a biologically active treatment. |
| Isopropyl Myristate Emollient / skin-conditioning agent | Isopropyl myristate is a synthetic ester of isopropyl alcohol and myristic acid used as an emollient, thickening reducer, and penetration enhancer in cosmetic and topical formulations. It imparts a smooth, non-greasy feel and improves spreadability of products. |
| Caprylic Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Allantoin Key active Soothing/skin-conditioning agent | Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products. |
| Triticum Vulgare Germ Oil Emollient / antioxidant | Triticum Vulgare (wheat) Germ Oil is a plant-derived oil rich in vitamin E, essential fatty acids, and phytosterols, used to condition and soften skin while providing antioxidant support. It functions primarily as a nourishing emollient in moisturizers and cosmetic formulations. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Triethylene Glycol Solvent / humectant | Triethylene glycol is a low-molecular-weight glycol used in cosmetic formulations primarily as a solvent and humectant, helping to dissolve ingredients and retain moisture. It is considered a base/formulation ingredient rather than a treatment active. |
| Fragrance Fragrance/masking agent | Fragrance refers to a blend of natural or synthetic aromatic compounds added to skincare products to impart a pleasant scent or mask the odor of other ingredients. It serves a sensory and formulation purpose rather than a therapeutic one. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.