Below is every ingredient in Wishcare Spf50 Sunscreen Body Lotion With Uva Uvb Protection explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF.
Ethylhexyl Salicylate (octisalate) is an oil-soluble organic UVB filter used in sunscreens to absorb ultraviolet radiation in the 295-315 nm range. It is also valued as a solvent that helps stabilize and dissolve other UV filters in formulations.
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters.
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Rubus Idaeus (raspberry) Fruit Extract is derived from raspberries and is used in skincare for its antioxidant content, including vitamin C and polyphenols. It is commonly included to help protect skin from oxidative stress and provide conditioning benefits.
Hyaluronic acid is a glycosaminoglycan that attracts and binds water to the skin, helping to maintain hydration and improve the appearance of plumpness and smoothness. It is widely used in moisturizers and serums and is generally well tolerated across skin types.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Skin dryness or barrier disruption with excessive contact | Uncommon | Frequent or prolonged exposure to water, especially hot or hard water, can disrupt the skin barrier and contribute to transepidermal water loss. |
| Irritation from impurities or hard water minerals | Rare | Reactions are attributed to contaminants, chlorine, or mineral content rather than water itself. |
| Contact dermatitis / skin irritation | Uncommon | Localized redness, itching, or stinging on application. |
| Photoallergic contact dermatitis | Rare | Reported particularly in adults, sometimes linked to prior ketoprofen sensitization. |
| Allergic contact dermatitis | Rare | Documented in patch-test studies, more often in children with atopic dermatitis. |
| Systemic absorption | Common | Detectable in blood after use; clinical significance unclear and not equated with harm. |
| Benzophenone formation over time | Uncommon | Degradation can yield trace benzophenone; relevance to skin health under study. |
| Mild skin irritation or stinging | Uncommon | Generally well tolerated; transient irritation can occur, particularly on sensitive or compromised skin. |
| Photoallergic or photocontact reactions | Rare | Reported occasionally with organic UV filters; less common than with some other sunscreen agents. |
| Eye irritation on accidental contact | Uncommon | Can cause stinging if the product migrates into the eyes. |
| Mild transient stinging or irritation | Uncommon | More likely at high concentrations or on compromised/broken skin. |
| Tacky or sticky skin feel | Common | A cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations. |
| Contact dermatitis or allergic reaction | Rare | True allergy to glycerin is uncommon; patch-test positivity is infrequent. |
| Skin dehydration in very low humidity | Rare | In very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Water Solvent/vehicle | Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating. |
| Octocrylene Key active UV filter | Octocrylene is an organic (chemical) sunscreen agent that absorbs UVB and short UVA radiation, and is also used to stabilize and solubilize other UV filters such as avobenzone. It is commonly incorporated into sunscreens and daily-care products with SPF. |
| Ethylhexyl Salicylate Key active UV filter (UVB sunscreen) | Ethylhexyl Salicylate (octisalate) is an oil-soluble organic UVB filter used in sunscreens to absorb ultraviolet radiation in the 295-315 nm range. It is also valued as a solvent that helps stabilize and dissolve other UV filters in formulations. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Glyceryl Stearate Emulsifier/emollient | Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active. |
| Cetyl Alcohol Emollient / emulsifier | Cetyl alcohol is a fatty alcohol used in skincare and cosmetics as an emollient, thickener, and emulsion stabilizer. It softens skin and helps maintain the consistency and texture of creams and lotions. |
| Cetearyl Alcohol Emollient/emulsifier | Cetearyl alcohol is a fatty alcohol blend (cetyl and stearyl alcohol) used in skincare as an emollient, emulsion stabilizer, and thickening agent. It helps soften skin and keep oil and water phases blended in creams and lotions. |
| Emulsifying Wax Emulsifier / texture enhancer | Emulsifying wax is a blend of fatty alcohols and surfactants used to bind oil and water phases into stable creams and lotions. It functions as a formulation base ingredient, improving texture and consistency rather than treating skin conditions. |
| Acrylates Crosspolymer Film former / rheology modifier | Acrylates Crosspolymer is a synthetic polymer used in skincare and cosmetics primarily as a thickening agent, emulsion stabilizer, and film former. It helps control product texture, viscosity, and spreadability rather than providing a direct therapeutic skin benefit. |
| Methylene Bis-Benzotriazolyl Tetramethylbutylphenol Key active UV filter (broad-spectrum) | Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters. |
| Squalane Emollient / occlusive moisturizer | Squalane is a saturated, stable hydrocarbon derived from squalene (sourced from plants like olives or sugarcane, or shark liver) used as a lightweight emollient that softens skin and reinforces the skin barrier by reducing transepidermal water loss. It is well tolerated, non-comedogenic for most users, and serves as a base or carrier ingredient rather than a therapeutic active. |
| Isopropyl Palmitate Emollient / Thickener | Isopropyl Palmitate is an ester of isopropyl alcohol and palmitic acid used as an emollient, skin-conditioning agent, and texture enhancer that improves spreadability and reduces greasiness in creams, lotions, and cosmetics. It is a formulation/base ingredient rather than a therapeutic active. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Rubus Idaeus Fruit Extract Key active Antioxidant/skin-conditioning | Rubus Idaeus (raspberry) Fruit Extract is derived from raspberries and is used in skincare for its antioxidant content, including vitamin C and polyphenols. It is commonly included to help protect skin from oxidative stress and provide conditioning benefits. |
| Carrot Seed Extract Antioxidant/emollient | Carrot seed extract is a botanical oil-derived ingredient rich in carotenoids, vitamins, and fatty acids, used in skincare for its antioxidant and skin-conditioning properties. It is valued for protecting skin from oxidative stress and providing moisturizing benefits. |
| Ceramide Skin barrier lipid / moisturizer | Ceramides are lipid molecules naturally found in the stratum corneum that help maintain the skin's barrier function and retain moisture. In skincare, they are used to reinforce the barrier, reduce transepidermal water loss, and soothe dry or compromised skin. |
| Hyaluronic Acid Key active Humectant / hydrating agent | Hyaluronic acid is a glycosaminoglycan that attracts and binds water to the skin, helping to maintain hydration and improve the appearance of plumpness and smoothness. It is widely used in moisturizers and serums and is generally well tolerated across skin types. |
| Avena Sativa Kernel Extract Key active Soothing / anti-irritant | Avena Sativa (oat) Kernel Extract is derived from oat seeds and is used in skincare for its soothing, anti-inflammatory, and skin-barrier-supporting properties, largely attributed to avenanthramides, beta-glucans, and saponins. It is commonly incorporated to calm irritation, reduce itching, and improve hydration in sensitive or compromised skin. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Hydroxyethylcellulose Thickener/viscosity modifier | Hydroxyethylcellulose is a non-ionic, water-soluble cellulose derivative used to thicken, stabilize, and adjust the texture of aqueous cosmetic formulations. It functions as a gelling and film-forming agent rather than providing a direct biological skin benefit. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Potassium Sorbate Preservative | Potassium sorbate is the potassium salt of sorbic acid, used as a mild preservative to inhibit mold, yeast, and some bacterial growth in cosmetic formulations. It is most effective at acidic pH and is often combined with other preservatives for broad-spectrum protection. |
| Sodium Benzoate Preservative | Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.