Purplle · 🇮🇳 India

Aqualogica Glow Dewy Sunscreen 15G

48 ingredients
What's in it

Below is every ingredient in Aqualogica Glow Dewy Sunscreen 15G explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
2 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: Low
Highest comedogenic rating 1/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Your questions, answered from the ingredient list

Is Aqualogica Glow Dewy Sunscreen 15G fungal-acne safe?
Based on its listed ingredients, Aqualogica Glow Dewy Sunscreen 15G contains 2 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): Glyceryl Glucoside, Glyceryl Stearate. If you are fungal-acne prone, you may want to avoid these.
Does Aqualogica Glow Dewy Sunscreen 15G contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of Aqualogica Glow Dewy Sunscreen 15G.
Will Aqualogica Glow Dewy Sunscreen 15G clog pores?
The highest comedogenic rating among its listed ingredients is 1/5 (low). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is Aqualogica Glow Dewy Sunscreen 15G safe to use in pregnancy?
None of its listed ingredients are flagged for pregnancy caution in our reference data — but always confirm your full routine with your own doctor.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

Methylene Bis-Benzotriazolyl Tetramethylbutylphenol
UV filter (broad-spectrum)

Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters.

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
UV filter (sunscreen)

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection.

Ethylhexyl Triazone
UVB sunscreen filter

Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF.

Diethylamino Hydroxybenzoyl Hexyl Benzoate
UVA filter (sunscreen)

Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.

Niacinamide
Cell-communicating / barrier-repair active

Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.

Vaccinium Angustifolium Fruit Extract
Antioxidant

Vaccinium Angustifolium (lowbush blueberry) fruit extract is a botanical ingredient rich in polyphenols, anthocyanins, and vitamins used in skincare for its antioxidant and skin-conditioning properties. It helps neutralize free radicals and may support skin protection against oxidative stress.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Irritation or sensitivityVery rarePurified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water.
Transepidermal water loss aggravation in compromised skinRareEvaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent.
Mild skin irritation or transient rednessRareGenerally well tolerated; occasional irritation reported in sensitive individuals.
Allergic contact dermatitisVery rareIsolated case reports; sensitization is uncommon.
Comedogenicity (pore-clogging)RareConsidered low-comedogenic, but acne-prone skin may occasionally react.
Mild skin irritationRareOccasional transient redness or irritation, generally in sensitive individuals.
Contact allergy / sensitizationVery rareSilicones are considered low-allergenic; documented reactions are exceptional.
Acne or comedone formationRareGenerally regarded as non-comedogenic, but isolated breakouts may occur depending on formulation.
Eye irritationRarePossible stinging if product migrates into the eyes.
Skin irritation or stingingUncommonMild transient irritation, particularly on broken or compromised skin.
Contact urticariaVery rareHives at the application site reported in isolated cases.
Contact dermatitis / allergic reactionVery rareAllergic sensitization is uncommon; reactions may relate to residual monomers or other formulation components.
Temporary tightness or drynessUncommonFilm-forming effect can produce a sensation of skin tightness in some users.
Skin irritation or contact dermatitisRareOccasional reports of mild irritation, generally considered well-tolerated.
Allergic contact dermatitis / sensitizationVery rareSensitization is uncommon; large molecular size limits skin penetration.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Aqua
Solvent / vehicle
Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery.
C12-C15 Alkyl Benzoate
Emollient/skin-conditioning agent
C12-C15 Alkyl Benzoate is a lightweight ester emollient derived from benzoic acid and long-chain fatty alcohols, used in cosmetic formulations to improve spreadability, provide a smooth non-greasy finish, and act as a solvent or carrier. It is widely regarded as a stable, low-irritation base ingredient.
Caprylyl Methicone
Emollient / spreading agent
Caprylyl Methicone is a volatile silicone fluid used in cosmetic formulations to provide a light, non-greasy, smooth skin feel and to enhance the spreadability of products. It also acts as a solvent and carrier for other ingredients, particularly in sunscreens and color cosmetics.
Aloe Barbadensis Leaf Juice Extract
Soothing/hydrating agent
Aloe Barbadensis Leaf Juice Extract is derived from the inner gel of the aloe vera plant and is widely used in skincare as a humectant and soothing agent to hydrate and calm irritated or sun-exposed skin. It also has mild emollient and antioxidant properties and is commonly used in after-sun and moisturizing formulations.
Sodium Acrylates Copolymer
Thickener / film-forming stabilizer
Sodium Acrylates Copolymer is a synthetic anionic polymer used to thicken, stabilize, and improve the texture of cosmetic formulations, often forming a smooth film on the skin. It functions primarily as a rheology modifier and emulsion stabilizer rather than a treatment active.
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol Key active
UV filter (broad-spectrum)
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters.
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine Key active
UV filter (sunscreen)
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection.
Ethylhexyl Triazone Key active
UVB sunscreen filter
Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF.
Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active
UVA filter (sunscreen)
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Glycerin
Humectant
Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations.
Dimethicone
Emollient/occlusive (silicone)
Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active.
Acrylates/C12-22 Alkyl Methacrylate Copolymer
Film former / rheology modifier
Acrylates/C12-22 Alkyl Methacrylate Copolymer is a synthetic copolymer used in cosmetics as a film-forming agent and to modify texture and viscosity. It helps improve water resistance, spreadability, and the longevity of products such as sunscreens and color cosmetics.
Biosaccharide Gum-4
Skin-conditioning / soothing agent
Biosaccharide Gum-4 is a polysaccharide derived from microbial fermentation of plant sugars, used in topical formulations as a film-forming humectant and soothing agent. It is reported to help reduce visible signs of irritation and provide a smoothing, hydrating feel to the skin.
Citrullus Lanatus Fruit Extract
Antioxidant / humectant
Citrullus Lanatus (watermelon) Fruit Extract is derived from watermelon and is used in skincare for its antioxidant, hydrating, and skin-conditioning properties, attributed to its content of vitamins (A, C), amino acids like citrulline, and natural sugars. It helps protect the skin from oxidative stress and supports moisture retention.
Niacinamide Key active
Cell-communicating / barrier-repair active
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Vaccinium Angustifolium Fruit Extract Key active
Antioxidant
Vaccinium Angustifolium (lowbush blueberry) fruit extract is a botanical ingredient rich in polyphenols, anthocyanins, and vitamins used in skincare for its antioxidant and skin-conditioning properties. It helps neutralize free radicals and may support skin protection against oxidative stress.
Citrus Paradisi Extract
Antioxidant/skin-conditioning agent
Citrus paradisi (grapefruit) extract is derived from the fruit and is used in skincare for its antioxidant, brightening, and astringent properties owing to vitamin C, flavonoids, and other polyphenols. It is most often included as a botanical additive rather than a primary therapeutic active.
Laminaria Digitata Extract
Conditioning/antioxidant
Laminaria Digitata Extract is derived from brown seaweed and is used in skincare for its mineral, polysaccharide, and antioxidant content, providing skin-conditioning, hydrating, and soothing benefits. It is commonly included for its purported moisturizing and protective properties.
Sodium Hyaluronate
Humectant / hydrator
Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid.
Ceramide EOP
Skin barrier lipid
Ceramide EOP is a long-chain omega-hydroxy ceramide that helps form and maintain the skin's lipid barrier, supporting moisture retention and reducing transepidermal water loss. It is commonly used in moisturizers and barrier-repair formulations.
Ceramide NS
Skin-barrier lipid / emollient
Ceramide NS (formerly Ceramide 2) is a naturally occurring sphingolipid that helps restore and maintain the skin's lipid barrier, reducing transepidermal water loss and improving hydration. It is widely used in moisturizers and barrier-repair formulations.
Ceramide NG
Skin-barrier lipid / moisturizer
Ceramide NG (formerly ceramide 2) is a synthetic skin-identical lipid that helps restore and reinforce the stratum corneum barrier, reducing transepidermal water loss and improving hydration. It is widely used in moisturizers and barrier-repair formulations.
Ceramide NP
Skin-barrier replenishing lipid / emollient
Ceramide NP (formerly ceramide 3) is a naturally occurring sphingolipid that helps restore and maintain the skin's lipid barrier, reducing transepidermal water loss and improving hydration. It is widely used in moisturizers and barrier-repair formulations.
Ceramide AS
Skin-barrier lipid / emollient
Ceramide AS is a synthetic sphingolipid that mimics naturally occurring skin ceramides, helping restore and reinforce the stratum corneum barrier and reduce transepidermal water loss. It is commonly used in moisturizers and barrier-repair formulations.
Ceramide AP
Skin barrier lipid / moisturizer
Ceramide AP (ceramide 6-II) is a naturally occurring sphingolipid that helps restore and maintain the skin's barrier function and reduce transepidermal water loss. It is commonly used in moisturizers and barrier-repair formulations, often combined with other ceramides, cholesterol, and fatty acids.
Xylitylglucoside
Humectant / moisturizer
Xylitylglucoside is a sugar-derived humectant, typically used in combination with anhydroxylitol and xylitol, that helps attract and retain water in the skin and supports the skin barrier. It is valued for its skin-hydrating and moisturizing properties in cosmetic formulations.
Anhydroxylitol
Humectant / moisturizing agent
Anhydroxylitol is a sugar-derived (xylitol) humectant used in skincare to attract and retain water, helping to maintain skin hydration and barrier function. It is often combined with xylitol and xylitylglucoside to enhance the skin's natural moisturizing factors.
Xylitol
Humectant / moisturizer
Xylitol is a sugar alcohol used in topical formulations as a humectant that helps attract and retain moisture in the skin, and it may support the skin's microbiome and barrier function. It is generally well tolerated and considered safe for topical use.
L-Arginine
Amino acid / pH adjuster & humectant
L-Arginine is a basic amino acid used in skincare as a humectant, antioxidant, and pH-adjusting agent that helps neutralize acidic actives. It also supports skin barrier function and may contribute to hydration and nitric oxide-related microcirculation.
Trehalose
Humectant / moisturizer
Trehalose is a naturally occurring disaccharide used in skincare as a humectant and protective agent, helping retain moisture and stabilize cell membranes and proteins against dehydration and oxidative stress. It is well tolerated and commonly used to support skin barrier hydration.
Allantoin Key active
Soothing/skin-conditioning agent
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
1,2-Hexanediol
Humectant / preservative booster
1,2-Hexanediol is a synthetic diol used in skincare as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, often allowing reduced or preservative-free systems. It helps maintain product stability while contributing mild moisturizing properties.
Tocopheryl Acetate Key active
Antioxidant
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Xanthan Gum
Thickener/stabilizer
Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects.
Hydrogenated Lecithin
Emollient / Emulsifier
Hydrogenated lecithin is a phospholipid derived from lecithin through hydrogenation, used in skincare as an emulsifier, emollient, and skin-conditioning agent. It also helps stabilize formulations and form liposomes that can aid delivery of other ingredients.
Cetyl-PG Hydroxyethyl Palmitamide
Skin-conditioning emollient / pseudo-ceramide
Cetyl-PG Hydroxyethyl Palmitamide is a synthetic pseudo-ceramide used to mimic natural skin ceramides, helping to support the skin barrier and reduce transepidermal water loss. It functions as an emollient and moisturizing agent commonly found in barrier-repair and dry-skin formulations.
Propylene Glycol
Humectant / solvent
Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active.
Phenoxyethanol
Preservative
Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment.
Lecithin
Emollient / Emulsifier
Lecithin is a naturally occurring phospholipid (commonly derived from soybean or egg) used in skincare as an emulsifier, emollient, and penetration enhancer. It helps stabilize oil-and-water formulations and supports the skin barrier by mimicking natural lipids.
Glyceryl Stearate
Emulsifier/emollient
Glyceryl Stearate is a glycerol ester of stearic acid widely used as a non-ionic emulsifier and emollient to stabilize oil-in-water formulations and improve skin feel. It functions as a base/formulation ingredient rather than a therapeutic active.
Triethoxycaprylylsilane
Coating/surface treatment agent
Triethoxycaprylylsilane is a silane-based ingredient primarily used to coat and hydrophobically treat powders and pigments such as titanium dioxide, zinc oxide, and iron oxides, improving their dispersion, water resistance, and texture in cosmetic formulations. It functions as a formulation aid rather than a skin-treatment active.
Silica
Absorbent/texturizer
Silica is a mineral-derived ingredient (silicon dioxide) used in cosmetics to absorb oil and sebum, improve texture, and act as a bulking, anti-caking, or matting agent. It is generally inert and well tolerated on skin.
Glyceryl Glucoside Key active
Humectant / moisturizer
Glyceryl glucoside is a naturally occurring sugar-glycerol compound used in skincare as a humectant that attracts and binds water to the skin. It is also studied for its ability to stimulate aquaporin water-channel expression, supporting skin hydration and barrier function.
Coco-Glucoside
Mild surfactant/cleanser
Coco Glucoside is a gentle, plant-derived nonionic surfactant (an alkyl polyglucoside made from coconut fatty alcohols and glucose) used as a cleansing and foaming agent in face washes, shampoos, and body cleansers. It is valued for its mildness, biodegradability, and good skin and eye tolerance compared with harsher surfactants.
Disodium Lauryl Sulfosuccinate
Surfactant/cleansing agent
Disodium Lauryl Sulfosuccinate is a mild anionic surfactant derived from lauryl alcohol, used in cleansers, shampoos, and foaming products to provide gentle cleansing and foam. It is generally considered milder and less irritating than harsher sulfates like sodium lauryl sulfate.
Ethylhexylglycerin
Preservative booster / skin-conditioning agent
Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations.
Decyl Glucoside
Surfactant/Cleanser
Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants.
Citric Acid
pH adjuster / AHA exfoliant
Citric acid is an alpha-hydroxy acid derived from citrus fruits, used primarily to adjust and buffer formulation pH and as a chelating agent, and at higher concentrations as a mild chemical exfoliant. It can promote surface cell turnover and is sometimes included in antioxidant or brightening products.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →