Below is every ingredient in Deconstruct Daily Brightening Shield Trio Vitamin C Serum 30Ml Gel Sunscreen 50Gm explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF.
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection.
3-O-Ethyl Ascorbic Acid is a stable, water-soluble ethylated derivative of vitamin C that converts to ascorbic acid in the skin, providing antioxidant protection and supporting collagen synthesis and pigmentation control. It is valued for greater stability than pure L-ascorbic acid while delivering similar brightening and anti-aging benefits.
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters.
Ethylhexyl Salicylate (octisalate) is an oil-soluble organic UVB filter used in sunscreens to absorb ultraviolet radiation in the 295-315 nm range. It is also valued as a solvent that helps stabilize and dissolve other UV filters in formulations.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Mild skin irritation or transient redness | Rare | Generally well tolerated; occasional irritation reported in sensitive individuals. |
| Allergic contact dermatitis | Very rare | Isolated case reports; sensitization is uncommon. |
| Comedogenicity (pore-clogging) | Rare | Considered low-comedogenic, but acne-prone skin may occasionally react. |
| Skin irritation or mild contact dermatitis | Rare | Occasional reports of localized redness or irritation, generally mild. |
| Allergic contact dermatitis / sensitization | Very rare | Isolated case reports; considered a low-sensitizing UV filter. |
| Photoallergic reaction | Very rare | Uncommon given its photostability, but possible in sensitive individuals. |
| Contact irritation | Rare | Mild redness or stinging occasionally reported, generally well tolerated. |
| Contact dermatitis / skin irritation | Rare | Occasional reports of mild irritation or redness in sensitive individuals. |
| Stinging or eye irritation | Rare | May occur if product migrates into the eyes, generally formulation-related. |
| Mild transient irritation or stinging | Rare | Generally well tolerated; occasional irritation in sensitive skin. |
| Oxidation-related sensitization | Very rare | Unsaturated phospholipids can oxidize, potentially yielding irritant by-products. |
| Mild skin irritation | Uncommon | Possible with higher concentrations or sensitive skin |
| Contact dermatitis / allergic sensitization | Rare | Documented in case reports as a contact allergen |
| Hypersensitivity or anaphylactoid reactions | Very rare | Reported mainly with injectable/parenteral forms, not topical |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| C12-C15 Alkyl Benzoate Emollient/skin-conditioning agent | C12-C15 Alkyl Benzoate is a lightweight ester emollient derived from benzoic acid and long-chain fatty alcohols, used in cosmetic formulations to improve spreadability, provide a smooth non-greasy finish, and act as a solvent or carrier. It is widely regarded as a stable, low-irritation base ingredient. |
| Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active UVA filter (sunscreen) | Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens. |
| Ethylhexyl Triazone Key active UVB sunscreen filter | Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF. |
| Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine Key active UV filter (sunscreen) | Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection. |
| Phospholipids Emollient / skin-conditioning agent and liposome-forming emulsifier | Phospholipids are amphiphilic lipids (commonly derived from soy or egg lecithin) used in skincare to form liposomes, stabilize emulsions, and reinforce the skin barrier. They also enhance penetration and delivery of other actives. |
| Polysorbate 80 Emulsifier / surfactant / solubilizer | Polysorbate 80 is a nonionic surfactant derived from sorbitol and oleic acid, used to emulsify oil and water phases and solubilize fragrances and oils in cosmetic and pharmaceutical formulations. It functions as a formulation aid rather than a therapeutic active. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| 3-O-Ethyl Ascorbic Acid Key active Antioxidant / brightening vitamin C derivative | 3-O-Ethyl Ascorbic Acid is a stable, water-soluble ethylated derivative of vitamin C that converts to ascorbic acid in the skin, providing antioxidant protection and supporting collagen synthesis and pigmentation control. It is valued for greater stability than pure L-ascorbic acid while delivering similar brightening and anti-aging benefits. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Methylene Bis-Benzotriazolyl Tetramethylbutylphenol Key active UV filter (broad-spectrum) | Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters. |
| Decyl Glucoside Surfactant/Cleanser | Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Ethylhexyl Salicylate Key active UV filter (UVB sunscreen) | Ethylhexyl Salicylate (octisalate) is an oil-soluble organic UVB filter used in sunscreens to absorb ultraviolet radiation in the 295-315 nm range. It is also valued as a solvent that helps stabilize and dissolve other UV filters in formulations. |
| Cetearyl Olivate Emulsifier / emollient | Cetearyl Olivate is an olive oil-derived emulsifier and emollient, typically used with Sorbitan Olivate, that helps blend oil and water phases while conditioning and softening the skin. It supports the skin barrier and gives formulations a light, non-greasy feel. |
| Sorbitan Olivate Emulsifier | Sorbitan Olivate is an olive-derived ester of sorbitol and olive oil fatty acids used as a non-ionic emulsifier and emollient. It is often paired with Cetearyl Olivate (as Olivem 1000) to stabilize oil-in-water emulsions and impart a soft skin feel. |
| Coco-Caprylate/Caprate Emollient / skin-conditioning agent | Coco-Caprylate/Caprate is a lightweight ester emollient derived from coconut-sourced fatty alcohols and caprylic/capric acids, used to provide a smooth, dry, non-greasy skin feel and to act as a silicone alternative. It functions primarily as a spreading agent and texture enhancer in lotions, creams, and sunscreens. |
| Polyglyceryl-2 Isostearate/Dimer Dilinoleate Copolymer Emollient/emulsifier | Polyglyceryl-2 Isostearate/Dimer Dilinoleate Copolymer is a polymeric ester used in cosmetic formulations as an emollient, skin-conditioning agent, and emulsion stabilizer, helping to bind oils and pigments and improve texture and spreadability. It is most commonly found in lip products, balms, and color cosmetics. |
| Squalane Emollient / occlusive moisturizer | Squalane is a saturated, stable hydrocarbon derived from squalene (sourced from plants like olives or sugarcane, or shark liver) used as a lightweight emollient that softens skin and reinforces the skin barrier by reducing transepidermal water loss. It is well tolerated, non-comedogenic for most users, and serves as a base or carrier ingredient rather than a therapeutic active. |
| Butyloctyl Salicylate Emollient / UV filter solubilizer | Butyloctyl Salicylate is a lipophilic salicylate ester used in cosmetic formulations primarily as an emollient and as a solubilizer that enhances the dissolution and stability of organic UV filters in sunscreens. It also provides mild spreadability and a smooth skin feel. |
| Sodium Carbomer Thickener / gel-forming agent | Sodium Carbomer is the sodium salt of carbomer, a synthetic high-molecular-weight polymer used to thicken, stabilize, and create gel textures in cosmetic formulations. It functions as a rheology modifier and emulsion stabilizer rather than a biologically active treatment ingredient. |
| Glyceryl Dibehenate Emollient / emulsifier | Glyceryl Dibehenate is a glycerol ester of behenic acid used primarily as an emollient, emulsifier, and texture-enhancing agent in cosmetic formulations. It helps stabilize emulsions and impart a smooth, conditioned feel to the skin. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Hydrated Silica Abrasive/absorbent | Hydrated silica is a porous form of silicon dioxide used in skincare and toothpaste as a mild abrasive, absorbent, and viscosity-controlling agent. It helps with gentle exfoliation, oil absorption, and texture improvement in formulations. |
| Sodium Gluconate Chelating agent / skin-conditioning | Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment. |
| Glycine Soja Oil Emollient / antioxidant | Glycine Soja (soybean) Oil is a plant-derived oil rich in fatty acids, tocopherols, and phytosterols, used in skincare as an emollient and skin-conditioning agent. It helps soften skin, support the moisture barrier, and provides mild antioxidant benefits. |
| Daucus Carota Sativa Root Extract Key active Antioxidant / skin conditioning | Daucus Carota Sativa (carrot) Root Extract is a botanical extract rich in carotenoids, vitamins, and antioxidants used in skincare for conditioning, brightening, and protective effects against oxidative stress. It is commonly included for its skin-soothing and replenishing properties. |
| Beta-Carotene Key active Antioxidant / provitamin A colorant | Beta-carotene is a carotenoid pigment and provitamin A antioxidant used in skincare to help neutralize free radicals and provide mild orange-yellow coloration. It can be converted to retinol in the body and is also valued for supporting skin defense against oxidative stress. |
| Tocopherol Key active Antioxidant | Tocopherol (vitamin E) is a lipid-soluble antioxidant used in skincare to protect skin and formulations from oxidative damage caused by free radicals and UV exposure. It also functions as a skin-conditioning and emollient agent and can stabilize oils against rancidity. |
| Dehydroxanthan Gum Thickener / stabilizer | Dehydroxanthan gum is a modified xanthan gum derivative used as a rheology modifier and stabilizer in cosmetic formulations. It provides a light, non-tacky texture and helps suspend and emulsify ingredients in water-based products. |
| Acrylates/C10-30 Alkyl Acrylate Crosspolymer Rheology modifier / emulsion stabilizer | Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic crosslinked acrylic polymer used to thicken, gel, and stabilize emulsions in skincare and cosmetic formulations. It helps suspend ingredients and provides a smooth, consistent texture without acting as a treatment active. |
| Triethanolamine pH adjuster / emulsifier | Triethanolamine is an organic compound used in cosmetic formulations primarily to adjust pH and to act as an emulsifying agent, helping to stabilize mixtures of oil and water. It is typically present in small concentrations as a formulation aid rather than a therapeutic active. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.