Purplle · 🇮🇳 India

Dot And Key Blueberry Hydrate Barrier Repair Milky Toner Essence With 5 Ceramides

67 ingredients
What's in it

Below is every ingredient in Dot And Key Blueberry Hydrate Barrier Repair Milky Toner Essence With 5 Ceramides explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
7 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: Low
Highest comedogenic rating 1/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Your questions, answered from the ingredient list

Is Dot And Key Blueberry Hydrate Barrier Repair Milky Toner Essence With 5 Ceramides fungal-acne safe?
Based on its listed ingredients, Dot And Key Blueberry Hydrate Barrier Repair Milky Toner Essence With 5 Ceramides contains 7 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): Argania Spinosa Kernel Oil, Canola Oil, Helianthus Annuus (Sunflower) Seed Oil, Lactococcus Ferment Lysate, Limnanthes Alba (Meadowfoam) Seed Oil. If you are fungal-acne prone, you may want to avoid these.
Does Dot And Key Blueberry Hydrate Barrier Repair Milky Toner Essence With 5 Ceramides contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of Dot And Key Blueberry Hydrate Barrier Repair Milky Toner Essence With 5 Ceramides.
Will Dot And Key Blueberry Hydrate Barrier Repair Milky Toner Essence With 5 Ceramides clog pores?
The highest comedogenic rating among its listed ingredients is 1/5 (low). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is Dot And Key Blueberry Hydrate Barrier Repair Milky Toner Essence With 5 Ceramides safe to use in pregnancy?
None of its listed ingredients are flagged for pregnancy caution in our reference data — but always confirm your full routine with your own doctor.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

Allantoin
Soothing/skin-conditioning agent

Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.

Vaccinium Angustifolium (Blueberry) Fruit Extract
Antioxidant

Vaccinium Angustifolium (Blueberry) Fruit Extract is a botanical extract rich in anthocyanins, polyphenols, and vitamins that provides antioxidant activity to help neutralize free radicals and support skin conditioning in topical formulations. It is commonly included for its potential protective and soothing properties.

Niacinamide
Cell-communicating / barrier-repair active

Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.

Centella Asiatica (Cica) Extract
Soothing / antioxidant botanical extract

Centella Asiatica (Cica) extract is a plant-derived ingredient rich in triterpenoids such as asiaticoside, madecassoside, asiatic acid, and madecassic acid, used in skincare for its soothing, anti-inflammatory, antioxidant, and wound-healing/barrier-supporting properties. It is commonly included in formulations aimed at calming sensitive, irritated, or compromised skin.

Lactococcus Ferment Lysate
Probiotic-derived skin conditioning agent

Lactococcus Ferment Lysate is a postbiotic ingredient produced from the lysate of Lactococcus bacteria fermentation, used in skincare to support the skin barrier, microbiome balance, and skin renewal. It is valued for its conditioning and soothing properties.

Oryza Sativa (Rice) Extract
Antioxidant/skin-conditioning

Oryza Sativa (Rice) Extract is derived from rice and is used in skincare for its antioxidant, brightening, and soothing properties, owing to its content of ferulic acid, vitamins, and amino acids. It is often included to help even skin tone and provide mild moisturizing and barrier-supporting benefits.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Irritation or sensitivityVery rarePurified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water.
Transepidermal water loss aggravation in compromised skinRareEvaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent.
Mild skin irritation or stingingCommonMore likely at higher concentrations or on compromised/sensitive skin
Allergic contact dermatitisUncommonRecognized contact allergen; confirmed via patch testing
Irritant contact dermatitisUncommonNon-allergic irritation, often dose-dependent
Worsening of pre-existing eczema or barrier-impaired skinRarePenetration-enhancing effect may increase reactivity
Systemic toxicity from topical useVery rareReported mainly with extensive application on broken skin, especially in infants or burn patients
Mild skin irritationUncommonTransient stinging or redness, more likely on compromised or sensitive skin.
Enhanced penetration of co-formulated irritantsUncommonAs a penetration enhancer it may increase absorption and irritation potential of other actives.
Mild transient stinging or irritationUncommonMore likely at high concentrations or on compromised/broken skin.
Tacky or sticky skin feelCommonA cosmetic sensation rather than an adverse reaction, more noticeable at higher concentrations.
Contact dermatitis or allergic reactionRareTrue allergy to glycerin is uncommon; patch-test positivity is infrequent.
Skin dehydration in very low humidityRareIn very dry environments humectants may draw water from deeper skin layers if not paired with an occlusive.
Skin irritation or rednessRareGenerally well tolerated; mild irritation possible in sensitive individuals.
Comedogenicity / clogged poresRareConsidered low on the comedogenic scale but heavy oils may contribute to congestion in acne-prone skin.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Aqua
Solvent / vehicle
Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery.
Propylene Glycol
Humectant / solvent
Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active.
Propanediol
Humectant/solvent
Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives.
Glycerin
Humectant
Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations.
Limnanthes Alba (Meadowfoam) Seed Oil
Emollient / occlusive
Limnanthes Alba (Meadowfoam) Seed Oil is a stable, long-chain fatty acid–rich plant oil used as an emollient and occlusive that conditions skin, reduces moisture loss, and improves the spreadability and oxidative stability of formulations. It is valued for its high resistance to rancidity due to its unusual long-chain fatty acid composition.
Canola Oil
Emollient / skin-conditioning agent
Canola oil is a plant-derived oil rich in oleic and linoleic acids used in cosmetics as an emollient and occlusive to soften skin and reduce moisture loss. It serves primarily as a base or carrier ingredient rather than a therapeutic active.
Helianthus Annuus (Sunflower) Seed Oil
Emollient / skin-conditioning oil
Helianthus Annuus (Sunflower) Seed Oil is a plant-derived oil rich in linoleic acid and vitamin E used to soften skin and support the skin barrier. It functions as an emollient and occlusive agent in many cosmetic formulations.
Argania Spinosa Kernel Oil
Emollient / skin-conditioning oil
Argania Spinosa Kernel Oil (argan oil) is a plant-derived emollient rich in oleic and linoleic fatty acids, tocopherols, and polyphenols, used to soften skin, support the skin barrier, and provide antioxidant activity. It functions primarily as a moisturizing and conditioning agent in cosmetic formulations.
Polyglyceryl-10 Stearate
Emulsifier
Polyglyceryl-10 Stearate is a non-ionic emulsifier and surfactant derived from polyglycerol and stearic acid, used to blend oil and water phases and stabilize emulsions in skincare formulations. It is valued for its mildness and is common in formulations marketed as gentle or PEG-free.
Sodium Hyaluronate
Humectant / hydrator
Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid.
Allantoin Key active
Soothing/skin-conditioning agent
Allantoin is a naturally derived or synthetically produced compound used in skincare for its soothing, moisturizing, and keratolytic (skin-softening) properties. It promotes cell proliferation and helps calm irritation, commonly appearing in creams, lotions, and after-sun products.
Laminaria Digitata Extract
Conditioning/antioxidant
Laminaria Digitata Extract is derived from brown seaweed and is used in skincare for its mineral, polysaccharide, and antioxidant content, providing skin-conditioning, hydrating, and soothing benefits. It is commonly included for its purported moisturizing and protective properties.
Hydrogenated Lecithin
Emollient / Emulsifier
Hydrogenated lecithin is a phospholipid derived from lecithin through hydrogenation, used in skincare as an emulsifier, emollient, and skin-conditioning agent. It also helps stabilize formulations and form liposomes that can aid delivery of other ingredients.
Cetyl-PG Hydroxyethyl Palmitamide
Skin-conditioning emollient / pseudo-ceramide
Cetyl-PG Hydroxyethyl Palmitamide is a synthetic pseudo-ceramide used to mimic natural skin ceramides, helping to support the skin barrier and reduce transepidermal water loss. It functions as an emollient and moisturizing agent commonly found in barrier-repair and dry-skin formulations.
Ceramide 1
Skin barrier lipid / moisturizer
Ceramide 1 (Ceramide EOP) is a naturally occurring epidermal lipid used in skincare to help restore and reinforce the skin's barrier and reduce transepidermal water loss. It is commonly combined with other ceramides, cholesterol, and fatty acids to mimic the skin's natural lipid matrix.
Ceramide 2
Skin-barrier lipid / moisturizer
Ceramide 2 (Ceramide NS) is a naturally occurring sphingolipid used in skincare to help restore and reinforce the skin's lipid barrier, reducing transepidermal water loss and improving hydration. It is generally well tolerated and biocompatible with the skin's own ceramides.
Ceramide 3
Skin barrier replenisher / emollient
Ceramide 3 (also called Ceramide NP) is a lipid naturally found in the skin's stratum corneum that helps restore and maintain the skin barrier and reduce transepidermal water loss. It is widely used in moisturizers and barrier-repair formulations to improve hydration and skin integrity.
Ceramide 4
Skin-barrier lipid / emollient
Ceramide 4 (Ceramide AP) is a naturally occurring skin lipid used in formulations to help restore and reinforce the skin barrier and reduce transepidermal water loss. It supports the stratum corneum's lipid matrix, improving hydration and skin resilience.
Ceramide 6 II
Skin-barrier lipid / emollient
Ceramide 6 II (a phytosphingosine-based ceramide, also known as ceramide AP) is a naturally occurring skin lipid used in skincare to help restore and reinforce the stratum corneum barrier and reduce transepidermal water loss. It is typically incorporated as part of physiological lipid blends to support hydration and skin barrier function.
Cholesterol
Skin barrier lipid / emollient
Cholesterol is a naturally occurring lipid found in the skin's stratum corneum that, alongside ceramides and fatty acids, helps maintain the skin barrier and prevent transepidermal water loss. In skincare formulations it functions as an emollient and barrier-repair agent that improves hydration and skin resilience.
1,2-Hexanediol
Humectant / preservative booster
1,2-Hexanediol is a synthetic diol used in skincare as a humectant and solvent that also enhances the antimicrobial efficacy of formulations, often allowing reduced or preservative-free systems. It helps maintain product stability while contributing mild moisturizing properties.
Glycerin
Humectant
Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations.
Aqua
Solvent / vehicle
Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery.
Vaccinium Angustifolium (Blueberry) Fruit Extract Key active
Antioxidant
Vaccinium Angustifolium (Blueberry) Fruit Extract is a botanical extract rich in anthocyanins, polyphenols, and vitamins that provides antioxidant activity to help neutralize free radicals and support skin conditioning in topical formulations. It is commonly included for its potential protective and soothing properties.
Sodium PCA
Humectant
Sodium PCA (sodium pyrrolidone carboxylic acid) is the sodium salt of pyroglutamic acid and a component of the skin's natural moisturizing factor (NMF). It is widely used in cosmetics as a water-binding humectant to hydrate and soften the skin.
Panthenol
Humectant / skin-conditioning agent
Panthenol (provitamin B5) is converted to pantothenic acid in the skin, where it acts as a humectant and helps support skin barrier function and hydration. It is also used for its soothing and mild anti-inflammatory properties in topical formulations.
Niacinamide Key active
Cell-communicating / barrier-repair active
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Butylene Glycol
Humectant / solvent
Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations.
Acetamidoethoxyethanol
Humectant/moisturizing agent
Acetamidoethoxyethanol is a synthetic humectant used in skincare formulations to attract and retain moisture, helping improve skin hydration and surface smoothness. It functions as a supportive base ingredient rather than a primary therapeutic active.
Arginine
Amino acid / pH adjuster & conditioning agent
Arginine is a basic amino acid used in skincare primarily as a pH buffer/neutralizer and humectant-like conditioning agent that supports skin hydration and barrier function. It is generally well tolerated and often paired with acidic ingredients to balance formulation pH.
Aloe Barbadensis (Aloevera) Leaf Juice
Soothing/humectant
Aloe Barbadensis leaf juice is a plant-derived gel commonly used in skincare for its hydrating, soothing, and emollient properties. It contains polysaccharides, vitamins, and amino acids that support skin moisturization and barrier comfort.
Centella Asiatica (Cica) Extract Key active
Soothing / antioxidant botanical extract
Centella Asiatica (Cica) extract is a plant-derived ingredient rich in triterpenoids such as asiaticoside, madecassoside, asiatic acid, and madecassic acid, used in skincare for its soothing, anti-inflammatory, antioxidant, and wound-healing/barrier-supporting properties. It is commonly included in formulations aimed at calming sensitive, irritated, or compromised skin.
Xylitylglucoside
Humectant / moisturizer
Xylitylglucoside is a sugar-derived humectant, typically used in combination with anhydroxylitol and xylitol, that helps attract and retain water in the skin and supports the skin barrier. It is valued for its skin-hydrating and moisturizing properties in cosmetic formulations.
Anhydroxylitol
Humectant / moisturizing agent
Anhydroxylitol is a sugar-derived (xylitol) humectant used in skincare to attract and retain water, helping to maintain skin hydration and barrier function. It is often combined with xylitol and xylitylglucoside to enhance the skin's natural moisturizing factors.
Xylitol
Humectant / moisturizer
Xylitol is a sugar alcohol used in topical formulations as a humectant that helps attract and retain moisture in the skin, and it may support the skin's microbiome and barrier function. It is generally well tolerated and considered safe for topical use.
Lactococcus Ferment Lysate Key active
Probiotic-derived skin conditioning agent
Lactococcus Ferment Lysate is a postbiotic ingredient produced from the lysate of Lactococcus bacteria fermentation, used in skincare to support the skin barrier, microbiome balance, and skin renewal. It is valued for its conditioning and soothing properties.
Aqua
Solvent / vehicle
Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery.
Oryza Sativa (Rice) Extract Key active
Antioxidant/skin-conditioning
Oryza Sativa (Rice) Extract is derived from rice and is used in skincare for its antioxidant, brightening, and soothing properties, owing to its content of ferulic acid, vitamins, and amino acids. It is often included to help even skin tone and provide mild moisturizing and barrier-supporting benefits.
Saccharomyces Ferment Lysate Filtrate Key active
Conditioning/antioxidant active
Saccharomyces Ferment Lysate Filtrate is a yeast-derived fermentation ingredient containing amino acids, peptides, vitamins, and minerals, used in skincare to support skin conditioning, hydration, and antioxidant activity. It is valued for potentially improving skin barrier function and radiance.
Citric Acid
pH adjuster / AHA exfoliant
Citric acid is an alpha-hydroxy acid derived from citrus fruits, used primarily to adjust and buffer formulation pH and as a chelating agent, and at higher concentrations as a mild chemical exfoliant. It can promote surface cell turnover and is sometimes included in antioxidant or brightening products.
Sodium Benzoate
Preservative
Sodium benzoate is a salt of benzoic acid used as a preservative in cosmetic and skincare formulations to inhibit the growth of bacteria, yeast, and fungi, particularly in acidic products. It is most effective at a pH below 5.
Potassium Sorbate
Preservative
Potassium sorbate is the potassium salt of sorbic acid, used as a mild preservative to inhibit mold, yeast, and some bacterial growth in cosmetic formulations. It is most effective at acidic pH and is often combined with other preservatives for broad-spectrum protection.
Butylene Glycol
Humectant / solvent
Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations.
Water
Solvent/vehicle
Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating.
Geranium Robertianum Extract
Botanical extract (antioxidant/soothing)
Geranium Robertianum Extract is a plant-derived ingredient obtained from the herb Robert (Geranium robertianum), used in skincare for its antioxidant, astringent, and soothing properties attributed to tannins, flavonoids, and phenolic compounds. It is generally included as a conditioning and protective botanical additive rather than a clinically proven primary active.
Aqua
Solvent / vehicle
Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery.
Phragmites Communis Extract
Soothing/antioxidant botanical extract
Phragmites Communis (common reed) extract is a plant-derived ingredient used in skincare for its antioxidant, anti-inflammatory, and humectant/skin-conditioning properties. It is typically included to help soothe and protect the skin rather than as a primary therapeutic active.
Poria Cocos Extract Key active
Soothing/antioxidant botanical
Poria Cocos Extract, derived from the Wolfiporia extensa fungus, is used in skincare for its soothing, antioxidant, and skin-conditioning properties. It contains polysaccharides and triterpenes that may support skin barrier function and help reduce visible irritation.
Betaine
Humectant / osmolyte
Betaine is a naturally derived amino acid derivative (trimethylglycine) used in skincare as a humectant and osmoprotectant that attracts and retains moisture while helping stabilize skin barrier function. It also improves the texture and mildness of formulations.
Sodium PCA
Humectant
Sodium PCA (sodium pyrrolidone carboxylic acid) is the sodium salt of pyroglutamic acid and a component of the skin's natural moisturizing factor (NMF). It is widely used in cosmetics as a water-binding humectant to hydrate and soften the skin.
Sodium Lactate
Humectant / NMF component
Sodium lactate is the sodium salt of lactic acid and a key component of skin's natural moisturizing factor (NMF), used to hydrate the skin and buffer formulation pH. It also has mild exfoliating and humectant properties that help maintain skin moisture and barrier function.
PCA
Humectant / NMF component
PCA (pyrrolidone carboxylic acid), often as sodium PCA, is a naturally occurring component of skin's natural moisturizing factor (NMF) that attracts and binds water to the stratum corneum. It is used in skincare to improve hydration and skin softness.
Serine
Humectant / amino acid
Serine is a naturally occurring amino acid and component of the skin's natural moisturizing factor (NMF), used in skincare to support hydration and help maintain the skin barrier. It is typically incorporated as a conditioning and water-binding agent rather than a clinical treatment active.
Alanine
Amino acid / humectant
Alanine is a small non-essential amino acid used in skincare as a humectant and component of the skin's natural moisturizing factor (NMF), helping to maintain hydration and support the skin barrier. It is also used as a buffering agent and to improve the feel of formulations.
Glycine
Amino acid / humectant
Glycine is a small amino acid used in skincare as a humectant and conditioning agent, supporting skin hydration and acting as a building block for collagen and natural moisturizing factor. It is generally considered well-tolerated and is often included as part of moisturizing or barrier-support formulations.
Glutamic Acid
Humectant / amino acid
Glutamic acid is a naturally occurring amino acid used in skincare as a humectant and component of the skin's natural moisturizing factor (NMF), helping to maintain hydration and support the skin barrier. It is also used as a pH adjuster and in some formulations to enhance moisturization.
Lysine HCl
Conditioning/amino acid
Lysine HCl is the hydrochloride salt of the essential amino acid L-lysine, used in skincare primarily as a skin-conditioning and humectant agent that supports the skin's natural moisturizing factor and protein structure. It is generally considered a supportive formulation ingredient rather than a clinically proven active.
Threonine
Amino acid / skin conditioning agent
Threonine is an essential amino acid used in skincare primarily as a humectant and skin-conditioning agent, helping support hydration and the skin's natural moisturizing factor. It is also a building block for proteins such as collagen and elastin.
Arginine
Amino acid / pH adjuster & conditioning agent
Arginine is a basic amino acid used in skincare primarily as a pH buffer/neutralizer and humectant-like conditioning agent that supports skin hydration and barrier function. It is generally well tolerated and often paired with acidic ingredients to balance formulation pH.
Proline
Amino acid / skin-conditioning agent
Proline is a non-essential amino acid and a key component of collagen, used in skincare as a humectant and skin-conditioning agent to support hydration and the skin barrier. It is generally well tolerated and often included in formulations for its moisturizing and structural-protein-supporting properties.
Water
Solvent/vehicle
Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating.
Xanthan Gum
Thickener/stabilizer
Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects.
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Rheology modifier / emulsion stabilizer
Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic crosslinked acrylic polymer used to thicken, gel, and stabilize emulsions in skincare and cosmetic formulations. It helps suspend ingredients and provides a smooth, consistent texture without acting as a treatment active.
Sodium Gluconate
Chelating agent / skin-conditioning
Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment.
Disodium EDTA
Chelating agent
Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active.
Phenoxyethanol
Preservative
Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment.
Ethylhexylglycerin
Preservative booster / skin-conditioning agent
Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →