Below is every ingredient in Dot And Key Strawberry Dew Tinted Sunscreen Spf 50 03 Sand 50Ml 12 explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.
Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.
Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.
Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens.
Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF.
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection.
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters.
Aggregated from the active ingredients in this product.
| Reported effect | How often | Notes |
|---|---|---|
| Irritation or sensitivity | Very rare | Purified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water. |
| Transepidermal water loss aggravation in compromised skin | Rare | Evaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent. |
| Skin irritation or mild contact dermatitis | Rare | Occasional reports of localized redness or irritation, generally mild. |
| Allergic contact dermatitis / sensitization | Very rare | Isolated case reports; considered a low-sensitizing UV filter. |
| Photoallergic reaction | Very rare | Uncommon given its photostability, but possible in sensitive individuals. |
| Mild transient stinging or irritation | Uncommon | More likely on broken or compromised skin or at high concentrations. |
| Allergic contact dermatitis | Rare | Documented in patch-test studies but considered a relatively weak sensitizer. |
| Redness or itching | Rare | Typically resolves after discontinuation. |
| Contact irritation | Rare | Mild redness or stinging occasionally reported, generally well tolerated. |
| Skin irritation | Rare | Generally well tolerated; mild irritation possible in sensitive individuals. |
| Comedogenicity / breakouts | Uncommon | Low comedogenic potential but may contribute to clogged pores in acne-prone skin. |
| Contact urticaria | Very rare | Isolated reports of hive-like reactions tied to benzoate moiety. |
| Mild skin irritation | Rare | Occasional transient redness or stinging, typically in sensitive skin. |
| Eye irritation | Uncommon | Possible if product contacts the eyes during application. |
Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.
| Ingredient | What it does |
|---|---|
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Diethylamino Hydroxybenzoyl Hexyl Benzoate Key active UVA filter (sunscreen) | Diethylamino Hydroxybenzoyl Hexyl Benzoate (also known as Uvinul A Plus) is an oil-soluble organic UV filter that absorbs primarily in the long-wave UVA range (around 354 nm), helping protect skin from UVA-induced damage. It is photostable and commonly combined with other filters in broad-spectrum sunscreens. |
| Butylene Glycol Humectant / solvent | Butylene glycol is a small diol commonly used in skincare as a humectant, solvent, and viscosity-reducing agent that helps dissolve other ingredients and improve skin feel. It is widely regarded as safe and non-sensitizing for the majority of users at cosmetic concentrations. |
| Ethylhexyl Triazone Key active UVB sunscreen filter | Ethylhexyl Triazone is an oil-soluble organic UV filter that strongly absorbs UVB radiation (peak around 314 nm), valued for its high photostability and efficiency at low concentrations. It is commonly used in sunscreens and daily-wear products to boost SPF. |
| C12-15 Alkyl Benzoate Emollient / texture enhancer | C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active. |
| Dibutyl Adipate Emollient / solvent | Dibutyl Adipate is a synthetic ester of adipic acid and butanol used in cosmetics as an emollient, solvent, and skin-conditioning agent. It imparts a light, non-greasy feel and helps spread and dissolve UV filters and other oil-soluble ingredients. |
| Propylene Glycol Dicaprylate/Dicaprate Emollient/skin-conditioning agent | Propylene Glycol Dicaprylate/Dicaprate is a diester of propylene glycol and caprylic/capric fatty acids used as an emollient, solvent, and skin-conditioning agent in cosmetic formulations. It imparts a light, non-greasy feel and helps soften skin while aiding the dispersion of other ingredients. |
| Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine Key active UV filter (sunscreen) | Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine (also known as Bemotrizinol or Tinosorb S) is a broad-spectrum organic UV filter that absorbs both UVA and UVB radiation. It is highly photostable and is commonly used in sunscreens and daytime skincare products to provide photoprotection. |
| Lecithin Emollient / Emulsifier | Lecithin is a naturally occurring phospholipid (commonly derived from soybean or egg) used in skincare as an emulsifier, emollient, and penetration enhancer. It helps stabilize oil-and-water formulations and supports the skin barrier by mimicking natural lipids. |
| Polyglyceryl-3 Polyricinoleate Emulsifier | Polyglyceryl-3 Polyricinoleate (PGPR) is a polyglycerol ester of polyricinoleic acid (derived from castor oil) used as a lipophilic emulsifier and stabilizer, primarily in water-in-oil emulsions and lip/color cosmetics. It helps reduce viscosity and stabilize oil-based formulations. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Trisodium Ethylenediamine Disuccinate Chelating agent | Trisodium Ethylenediamine Disuccinate (Trisodium Ethylenediamine Disuccinate, or HEDTA-type biodegradable chelator) is a biodegradable chelating agent used to bind metal ions in cosmetic formulations. By sequestering trace metals, it helps stabilize products, prevent discoloration and rancidity, and enhance the efficacy of preservatives and antioxidants. |
| Isododecane Emollient/solvent | Isododecane is a lightweight, volatile branched-chain hydrocarbon used as a solvent and emollient in cosmetics. It spreads easily and evaporates quickly, improving texture and wear in products like long-lasting makeup, primers, and sunscreens. |
| Glycerin Humectant | Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Phenyl Trimethicone Silicone emollient/conditioning agent | Phenyl Trimethicone is a phenyl-substituted silicone used in skincare and cosmetics to impart a smooth, silky feel, add shine, and provide water-repellent film-forming and conditioning properties. It functions as a formulation/base ingredient rather than a treatment active. |
| Glyceryl Citrate/Lactate/Linoleate/Oleate Emulsifier / emollient | Glyceryl Citrate/Lactate/Linoleate/Oleate is a glycerin-derived ester blend used as a non-ionic oil-in-water emulsifier and skin-conditioning agent in creams and lotions. It helps stabilize emulsions while imparting a smooth, moisturizing feel and supporting skin barrier function. |
| Titanium Dioxide Key active UV filter / mineral sunscreen | Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin. |
| Triethoxycaprylylsilane Coating/surface treatment agent | Triethoxycaprylylsilane is a silane-based ingredient primarily used to coat and hydrophobically treat powders and pigments such as titanium dioxide, zinc oxide, and iron oxides, improving their dispersion, water resistance, and texture in cosmetic formulations. It functions as a formulation aid rather than a skin-treatment active. |
| Polyhydroxystearic Acid Dispersant/emulsifier | Polyhydroxystearic acid is a fatty acid derivative used in cosmetic formulations primarily as a dispersing agent and emulsifier, helping to evenly distribute pigments (such as titanium dioxide and zinc oxide in sunscreens) and stabilize oil-based or water-in-oil systems. It improves texture, spreadability, and uniformity rather than providing a direct biological skin benefit. |
| Titanium Dioxide Key active UV filter / mineral sunscreen | Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin. |
| Silica Absorbent/texturizer | Silica is a mineral-derived ingredient (silicon dioxide) used in cosmetics to absorb oil and sebum, improve texture, and act as a bulking, anti-caking, or matting agent. It is generally inert and well tolerated on skin. |
| Dimethicone Emollient/occlusive (silicone) | Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active. |
| Methylene Bis-Benzotriazolyl Tetramethylbutylphenol Key active UV filter (broad-spectrum) | Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (also known as Bisoctrizole or Tinosorb M) is an organic-particulate UV filter that provides broad-spectrum protection across both UVA and UVB ranges by absorbing and scattering UV radiation. It is photostable and commonly used in sunscreens, often paired with other filters. |
| Aqua Solvent / vehicle | Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery. |
| Decyl Glucoside Surfactant/Cleanser | Decyl Glucoside is a mild, non-ionic surfactant derived from glucose and fatty alcohols, commonly used as a gentle cleansing and foaming agent in shampoos, facial cleansers, and baby care products. It is valued for its biodegradability and low irritation potential compared to harsher surfactants. |
| Propylene Glycol Humectant / solvent | Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Isononyl Isononanoate Emollient/skin-conditioning agent | Isononyl Isononanoate is a synthetic ester emollient used in cosmetics to impart a light, silky, non-greasy skin feel and to aid the spreadability of formulations. It functions as a base/texture ingredient rather than a treatment active. |
| Propanediol Humectant/solvent | Propanediol is a plant-derived glycol used in skincare as a humectant, solvent, and penetration enhancer that improves moisturization and the spreadability of formulations. It also helps solubilize other ingredients and can boost the efficacy of certain actives. |
| Caprylic/Capric Triglyceride Emollient / skin-conditioning agent | Caprylic/Capric Triglyceride is a lightweight emollient derived from coconut or palm oil and glycerin, used to soften skin, improve spreadability, and act as a solvent for oil-soluble ingredients. It is well-tolerated and serves primarily as a base ingredient rather than an active. |
| Dicaprylyl Carbonate Emollient / texture enhancer | Dicaprylyl Carbonate is a lightweight, non-greasy emollient derived from coconut-based fatty alcohols and carbonic acid, used to improve skin feel and spreadability in cosmetic formulations. It also acts as a solvent and helps distribute pigments and other ingredients evenly. |
| Fragaria Ananassa (Strawberry) Fruit Extract Key active Antioxidant / skin conditioning | Fragaria Ananassa (Strawberry) Fruit Extract is a botanical extract rich in vitamin C, ellagic acid, and polyphenols used in cosmetics for antioxidant and skin-conditioning effects. It also contains naturally occurring fruit acids that may provide mild exfoliating and brightening benefits. |
| Tocopheryl Acetate Key active Antioxidant | Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier. |
| Niacinamide Key active Cell-communicating / barrier-repair active | Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%. |
| Panthenol Humectant / skin-conditioning agent | Panthenol (provitamin B5) is converted to pantothenic acid in the skin, where it acts as a humectant and helps support skin barrier function and hydration. It is also used for its soothing and mild anti-inflammatory properties in topical formulations. |
| Sodium Hyaluronate Humectant / hydrator | Sodium hyaluronate is the sodium salt of hyaluronic acid, a glycosaminoglycan that attracts and binds water to the skin to improve hydration and surface plumpness. Its lower molecular weight allows better penetration than native hyaluronic acid. |
| Polyglyceryl-3 Polyricinoleate Emulsifier | Polyglyceryl-3 Polyricinoleate (PGPR) is a polyglycerol ester of polyricinoleic acid (derived from castor oil) used as a lipophilic emulsifier and stabilizer, primarily in water-in-oil emulsions and lip/color cosmetics. It helps reduce viscosity and stabilize oil-based formulations. |
| Xanthan Gum Thickener/stabilizer | Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects. |
| Polyacrylate Crosspolymer-6 Film-forming/sensory-enhancing rheology modifier | Polyacrylate Crosspolymer-6 is a synthetic crosslinked acrylate polymer used in skincare and cosmetic formulations to provide a smooth, silky sensory feel, stabilize emulsions, and help form a light film on the skin. It is a formulation aid rather than a biologically active treatment ingredient. |
| Zea Mays (Corn) Starch Absorbent / anti-caking agent | Zea Mays (Corn) Starch is a natural polysaccharide powder derived from corn kernels, used in cosmetics to absorb moisture and oil, impart a soft matte feel, and act as a bulking or anti-caking agent. It is a formulation/base ingredient rather than a therapeutic active. |
| Polyacrylate-13 Rheology modifier / thickener | Polyacrylate-13 is a synthetic acrylate copolymer used as a thickening, stabilizing, and emulsifying agent in cosmetic formulations. It helps create stable gels and emulsions and improves product texture without contributing to active treatment effects. |
| Polyisobutene Emollient/film-former | Polyisobutene is a synthetic hydrocarbon polymer used in cosmetics as an emollient, thickener, and film-forming agent that imparts smooth texture, adhesion, and improved spreadability. It is commonly found in long-wear makeup, lip products, and sunscreens to enhance water resistance and product longevity. |
| Polysorbate 20 Emulsifier / solubilizer | Polysorbate 20 is a nonionic surfactant derived from sorbitol and lauric acid, used in skincare to solubilize fragrances and essential oils and to stabilize oil-in-water emulsions. It functions primarily as a formulation aid rather than a treatment active. |
| Sodium Gluconate Chelating agent / skin-conditioning | Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment. |
| Phenoxyethanol Preservative | Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment. |
| Ethylhexylglycerin Preservative booster / skin-conditioning agent | Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations. |
| Disodium EDTA Chelating agent | Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active. |
| Triethoxycaprylylsilane Coating/surface treatment agent | Triethoxycaprylylsilane is a silane-based ingredient primarily used to coat and hydrophobically treat powders and pigments such as titanium dioxide, zinc oxide, and iron oxides, improving their dispersion, water resistance, and texture in cosmetic formulations. It functions as a formulation aid rather than a skin-treatment active. |
| Polyhydroxystearic Acid Dispersant/emulsifier | Polyhydroxystearic acid is a fatty acid derivative used in cosmetic formulations primarily as a dispersing agent and emulsifier, helping to evenly distribute pigments (such as titanium dioxide and zinc oxide in sunscreens) and stabilize oil-based or water-in-oil systems. It improves texture, spreadability, and uniformity rather than providing a direct biological skin benefit. |
| Triethoxycaprylylsilane Coating/surface treatment agent | Triethoxycaprylylsilane is a silane-based ingredient primarily used to coat and hydrophobically treat powders and pigments such as titanium dioxide, zinc oxide, and iron oxides, improving their dispersion, water resistance, and texture in cosmetic formulations. It functions as a formulation aid rather than a skin-treatment active. |
| Polyhydroxystearic Acid Dispersant/emulsifier | Polyhydroxystearic acid is a fatty acid derivative used in cosmetic formulations primarily as a dispersing agent and emulsifier, helping to evenly distribute pigments (such as titanium dioxide and zinc oxide in sunscreens) and stabilize oil-based or water-in-oil systems. It improves texture, spreadability, and uniformity rather than providing a direct biological skin benefit. |
Key active = does the main work. Ingredient explanations are drawn from public databases & literature.
Peer-reviewed papers on the active ingredients in this product, via PubMed.