Purplle · 🇮🇳 India

Dot And Key Vitamin C E 100 Percentage Mineral Sunscreen Spf 50 Pa 50 Gm

43 ingredients
What's in it

Below is every ingredient in Dot And Key Vitamin C E 100 Percentage Mineral Sunscreen Spf 50 Pa 50 Gm explained, its standout actives, and the side effects reported in research for those actives — analysed for Indian skin.

Suitability at a glance — for Indian skin

🍄 May trigger fungal acne
4 ingredient(s) can feed Malassezia — relevant in humid Indian weather
Pore-clogging risk: Low
Highest comedogenic rating 1/5 — matters for oily, acne-prone skin
Fragrance-free
No fragrance or EU-declared allergens

Flags derived from the ingredient list using dermatology reference data (fungal-acne substrate, comedogenicity, EU allergens). General guidance, not a diagnosis.

Your questions, answered from the ingredient list

Is Dot And Key Vitamin C E 100 Percentage Mineral Sunscreen Spf 50 Pa 50 Gm fungal-acne safe?
Based on its listed ingredients, Dot And Key Vitamin C E 100 Percentage Mineral Sunscreen Spf 50 Pa 50 Gm contains 3 ingredient(s) reported to feed Malassezia (the yeast behind fungal acne): Isostearic Acid, Polyglyceryl-3 Polyricinoleate, Sorbitan Isostearate. If you are fungal-acne prone, you may want to avoid these.
Does Dot And Key Vitamin C E 100 Percentage Mineral Sunscreen Spf 50 Pa 50 Gm contain fragrance?
No fragrance ingredients or EU-declared allergens were detected in the listed ingredients of Dot And Key Vitamin C E 100 Percentage Mineral Sunscreen Spf 50 Pa 50 Gm.
Will Dot And Key Vitamin C E 100 Percentage Mineral Sunscreen Spf 50 Pa 50 Gm clog pores?
The highest comedogenic rating among its listed ingredients is 1/5 (low). Comedogenicity matters most for oily, acne-prone skin in humid Indian weather; it is a property of ingredients in lab tests, not a guarantee either way.
Is Dot And Key Vitamin C E 100 Percentage Mineral Sunscreen Spf 50 Pa 50 Gm safe to use in pregnancy?
None of its listed ingredients are flagged for pregnancy caution in our reference data — but always confirm your full routine with your own doctor.

Answers are derived from the printed ingredient list and dermatology reference data — general guidance, not a diagnosis or a therapeutic claim.

Key actives

Zinc Oxide
UV filter / skin protectant

Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations.

Titanium Dioxide
UV filter / mineral sunscreen

Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.

Ascorbyl Glucoside
Antioxidant / vitamin C derivative

Ascorbyl Glucoside is a stable, water-soluble vitamin C derivative that is enzymatically converted to ascorbic acid in the skin, providing antioxidant protection and supporting collagen synthesis and skin brightening. It is generally considered milder and more stable than pure L-ascorbic acid.

Terminalia Ferdinandiana Fruit Extract
Antioxidant

Terminalia Ferdinandiana (Kakadu plum) fruit extract is an exceptionally rich natural source of vitamin C (ascorbic acid) along with ellagic and gallic acids, valued in skincare for antioxidant protection and potential brightening effects. It helps neutralize free radicals and may support collagen-related processes when stabilized in formulations.

Citrus Sinensis Fruit Extract
Antioxidant / skin conditioning

Citrus Sinensis (sweet orange) fruit extract is derived from oranges and is used in skincare for its vitamin C, flavonoid, and antioxidant content, providing skin-conditioning and brightening support. It also contributes fragrance and may serve as a mild astringent in formulations.

Fructooligosaccharides
Prebiotic / humectant

Fructooligosaccharides are plant-derived prebiotic carbohydrates used in skincare to selectively nourish beneficial skin microbiota and support skin barrier health. They also provide mild humectant and soothing properties in topical formulations.

Side effects reported in research

Aggregated from the active ingredients in this product.

Reported effectHow oftenNotes
Irritation or sensitivityVery rarePurified water itself is essentially inert; rare reactions are attributable to contaminants or accompanying ingredients rather than water.
Transepidermal water loss aggravation in compromised skinRareEvaporation of water from products may transiently increase dryness in very compromised skin barriers if occlusives are absent.
White cast / cosmetic residue on skinCommonNon-micronized particles can leave a visible white film, especially on darker skin tones.
Dryness or mild skin tightnessUncommonDue to its astringent nature, particularly in high concentrations.
Clogged pores / acne aggravationUncommonMore often attributed to occlusive base ingredients than to zinc oxide itself.
Contact irritation or stingingRareGenerally well tolerated; irritation often relates to other formulation components.
Allergic contact dermatitisVery rareTrue allergy to zinc oxide is uncommon; reactions usually involve other excipients or fragrances.
Skin irritationRareGenerally well tolerated; mild irritation possible in sensitive individuals.
Comedogenicity / breakoutsUncommonLow comedogenic potential but may contribute to clogged pores in acne-prone skin.
Contact urticariaVery rareIsolated reports of hive-like reactions tied to benzoate moiety.
Mild skin irritationUncommonPossible with high concentrations or sensitive/compromised skin.
Comedogenicity/pore congestionRareLow comedogenic potential reported in most assessments.
Contact allergy/sensitizationVery rareAllergic contact reactions are uncommon; the ingredient is generally regarded as low-risk.
Acneiform breakoutsRareAs a fatty acid derivative, may theoretically contribute to comedogenicity in acne-prone skin, though data are limited.

Frequencies reflect typical cosmetic use reported in the literature, not a guarantee for your skin.

Full ingredient breakdown

IngredientWhat it does
Aqua
Solvent / vehicle
Aqua (water) is the most common base ingredient in skincare formulations, serving as a solvent that dissolves water-soluble components and forms the medium for emulsions. It has no direct treatment activity and primarily contributes to texture, spreadability, and product delivery.
Zinc Oxide Key active
UV filter / skin protectant
Zinc oxide is a mineral (inorganic) UV filter that provides broad-spectrum protection against UVA and UVB radiation by scattering and absorbing light. It also has mild astringent and soothing properties and is used in sunscreens, diaper creams, and barrier preparations.
C12-15 Alkyl Benzoate
Emollient / texture enhancer
C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active.
Isostearic Acid
Emollient/emulsifier
Isostearic acid is a branched-chain fatty acid used in cosmetic formulations as an emollient, co-emulsifier, and dispersing agent that improves spreadability and texture. It is valued for its oxidative stability and liquid consistency compared to straight-chain stearic acid.
Polyhydroxystearic Acid
Dispersant/emulsifier
Polyhydroxystearic acid is a fatty acid derivative used in cosmetic formulations primarily as a dispersing agent and emulsifier, helping to evenly distribute pigments (such as titanium dioxide and zinc oxide in sunscreens) and stabilize oil-based or water-in-oil systems. It improves texture, spreadability, and uniformity rather than providing a direct biological skin benefit.
Dimethicone
Emollient/occlusive (silicone)
Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active.
Isododecane
Emollient/solvent
Isododecane is a lightweight, volatile branched-chain hydrocarbon used as a solvent and emollient in cosmetics. It spreads easily and evaporates quickly, improving texture and wear in products like long-lasting makeup, primers, and sunscreens.
C12-15 Alkyl Benzoate
Emollient / texture enhancer
C12-15 Alkyl Benzoate is a lightweight ester emollient widely used in skincare and cosmetics to improve spreadability, provide a smooth non-greasy skin feel, and act as a solvent and mild antimicrobial booster. It is considered a base/formulation ingredient rather than a treatment active.
Cyclopentasiloxane
Emollient/silicone
Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations.
Cyclopentasiloxane
Emollient/silicone
Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations.
PEG/PPG-18/18 Dimethicone
Silicone-based emulsifier/conditioning agent
PEG/PPG-18/18 Dimethicone is a water-dispersible silicone surfactant used to emulsify, stabilize, and impart a smooth, silky feel to skincare and cosmetic formulations. It functions primarily as an emulsifier and skin-conditioning agent rather than a therapeutic active.
Titanium Dioxide Key active
UV filter / mineral sunscreen
Titanium dioxide is an inorganic mineral compound used primarily as a physical (mineral) sunscreen agent that reflects and scatters UV radiation, and also serves as a white pigment and opacifier in cosmetic formulations. It is broadly photostable and considered gentle, making it common in products for sensitive and pediatric skin.
Silica
Absorbent/texturizer
Silica is a mineral-derived ingredient (silicon dioxide) used in cosmetics to absorb oil and sebum, improve texture, and act as a bulking, anti-caking, or matting agent. It is generally inert and well tolerated on skin.
Dimethicone
Emollient/occlusive (silicone)
Dimethicone is a silicone-based polymer used in skincare to soften skin, smooth texture, and form a breathable protective barrier that reduces transepidermal water loss. It is widely used as a base/formulation ingredient rather than a therapeutic active.
Cyclopentasiloxane
Emollient/silicone
Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations.
Dimethicone Crosspolymer
Silicone-based texture enhancer/film former
Dimethicone Crosspolymer is a crosslinked silicone polymer used in skincare and cosmetics to provide a smooth, silky feel, absorb excess oil, blur the appearance of pores and fine lines, and improve product spreadability. It functions as a formulation ingredient rather than a therapeutic active.
Cyclopentasiloxane
Emollient/silicone
Cyclopentasiloxane is a volatile cyclic silicone widely used in skincare and cosmetics to impart a smooth, silky feel and spreadability before evaporating, leaving no greasy residue. It also serves as a carrier and helps reduce tackiness in formulations.
Cetearyl Dimethicone/Vinyl Dimethicone Crosspolymer
Emollient/film-former
Cetearyl Dimethicone/Vinyl Dimethicone Crosspolymer is a silicone-based crosspolymer used in cosmetic formulations as an emollient, thickening agent, and film former that imparts a smooth, silky skin feel and helps stabilize emulsions. It is a formulation/base ingredient rather than a therapeutic active.
Glycerin
Humectant
Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations.
Propylene Glycol
Humectant / solvent
Propylene glycol is a small glycol molecule widely used in skincare as a humectant, solvent, and penetration enhancer that helps attract water and dissolve other ingredients. It is considered a base/formulation ingredient rather than a therapeutic active.
C13-15 Alkane
Emollient / solvent
C13-15 Alkane is a lightweight, plant-derived (often sugarcane-based) liquid hydrocarbon used as an emollient and spreading agent in skincare. It softens skin, improves product texture, and serves as a sustainable alternative to silicones and mineral oil.
Disteardimonium Hectorite
Rheology modifier / suspending agent
Disteardimonium Hectorite is a modified clay (quaternized hectorite) used in cosmetic formulations as a thickener and gellant, primarily in anhydrous and oil-based systems such as sunscreens, foundations, and lipsticks. It helps suspend pigments and prevent ingredient separation.
Polyglyceryl-3 Polyricinoleate
Emulsifier
Polyglyceryl-3 Polyricinoleate (PGPR) is a polyglycerol ester of polyricinoleic acid (derived from castor oil) used as a lipophilic emulsifier and stabilizer, primarily in water-in-oil emulsions and lip/color cosmetics. It helps reduce viscosity and stabilize oil-based formulations.
Sodium Chloride
Thickener / viscosity adjuster
Sodium chloride (table salt) is commonly used in cosmetics as a thickening and viscosity-control agent, particularly in surfactant-based cleansers, and also acts as a mild abrasive in scrubs. It is generally well tolerated and considered a formulation ingredient rather than a treatment active.
Lauryl PEG-10 Tris(Trimethylsiloxy)silylethyl Dimethicone
Silicone-based emulsifier
Lauryl PEG-10 Tris(Trimethylsiloxy)Silylethyl Dimethicone is a silicone polyether surfactant used to stabilize water-in-silicone emulsions, commonly found in foundations, sunscreens, and other cosmetic formulations. It helps disperse pigments and create smooth, spreadable textures.
PEG-9 Dimethicone
Silicone-based emulsifier/conditioning agent
PEG-9 Dimethicone is a water-dispersible, polyethylene glycol-modified silicone used in skincare and cosmetics as an emulsifier, surfactant, and skin-conditioning agent that imparts a smooth, silky feel. It is considered a formulation/base ingredient rather than a therapeutic active.
Polyglyceryl-3 Polyricinoleate
Emulsifier
Polyglyceryl-3 Polyricinoleate (PGPR) is a polyglycerol ester of polyricinoleic acid (derived from castor oil) used as a lipophilic emulsifier and stabilizer, primarily in water-in-oil emulsions and lip/color cosmetics. It helps reduce viscosity and stabilize oil-based formulations.
Sorbitan Isostearate
Emulsifier / surfactant
Sorbitan isostearate is a sorbitan ester of isostearic acid used as a nonionic emulsifier and stabilizer in oil-in-water and water-in-oil cosmetic formulations. It helps blend oil and water phases and improves texture and spreadability.
Ascorbyl Glucoside Key active
Antioxidant / vitamin C derivative
Ascorbyl Glucoside is a stable, water-soluble vitamin C derivative that is enzymatically converted to ascorbic acid in the skin, providing antioxidant protection and supporting collagen synthesis and skin brightening. It is generally considered milder and more stable than pure L-ascorbic acid.
Glycerin
Humectant
Glycerin is a widely used humectant that attracts and retains water in the skin, helping to hydrate the stratum corneum and support barrier function. It is considered safe and well-tolerated across most skin types and concentrations.
Water
Solvent/vehicle
Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating.
Terminalia Ferdinandiana Fruit Extract Key active
Antioxidant
Terminalia Ferdinandiana (Kakadu plum) fruit extract is an exceptionally rich natural source of vitamin C (ascorbic acid) along with ellagic and gallic acids, valued in skincare for antioxidant protection and potential brightening effects. It helps neutralize free radicals and may support collagen-related processes when stabilized in formulations.
Citrus Sinensis Fruit Extract Key active
Antioxidant / skin conditioning
Citrus Sinensis (sweet orange) fruit extract is derived from oranges and is used in skincare for its vitamin C, flavonoid, and antioxidant content, providing skin-conditioning and brightening support. It also contributes fragrance and may serve as a mild astringent in formulations.
Disodium EDTA
Chelating agent
Disodium EDTA is a chelating agent used in cosmetics to bind metal ions, improving product stability, preventing rancidity, and enhancing the efficacy of preservatives. It is a formulation/base ingredient rather than a treatment active.
Fructooligosaccharides Key active
Prebiotic / humectant
Fructooligosaccharides are plant-derived prebiotic carbohydrates used in skincare to selectively nourish beneficial skin microbiota and support skin barrier health. They also provide mild humectant and soothing properties in topical formulations.
Beta Vulgaris Root Extract
Antioxidant / skin-conditioning
Beta Vulgaris (beet) root extract is a plant-derived ingredient rich in betalains, sugars, and antioxidants, used in skincare for its conditioning, humectant, and free-radical-scavenging properties. It is generally regarded as mild and well-tolerated in topical formulations.
Water
Solvent/vehicle
Water is the most common base ingredient in cosmetic formulations, serving as a solvent that dissolves other ingredients and forms the bulk of emulsions and aqueous solutions. It is generally considered safe and non-irritating.
Niacinamide Key active
Cell-communicating / barrier-repair active
Niacinamide (vitamin B3) is a water-soluble active that supports the skin barrier, regulates sebum, brightens hyperpigmentation, and reduces inflammation. It is widely tolerated across skin types and used in concentrations commonly ranging from 2% to 10%.
Sodium Gluconate
Chelating agent / skin-conditioning
Sodium gluconate is the sodium salt of gluconic acid used in skincare primarily as a chelating agent to bind metal ions and stabilize formulations, with secondary humectant and skin-conditioning properties. It is generally considered a base/formulation ingredient rather than an active treatment.
Xanthan Gum
Thickener/stabilizer
Xanthan gum is a polysaccharide produced by bacterial fermentation, used in skincare as a thickening, gelling, and emulsion-stabilizing agent. It improves product texture and suspension of ingredients without contributing active treatment effects.
Tocopheryl Acetate Key active
Antioxidant
Tocopheryl acetate is a stable, esterified form of vitamin E used in skincare as an antioxidant and conditioning agent. It is converted to active tocopherol in the skin, helping protect against oxidative stress and supporting the skin barrier.
Phenoxyethanol
Preservative
Phenoxyethanol is a widely used broad-spectrum preservative that protects cosmetic and skincare formulations from bacterial and fungal contamination. It is typically used at concentrations up to 1% and serves as a formulation/base ingredient rather than an active treatment.
Ethylhexylglycerin
Preservative booster / skin-conditioning agent
Ethylhexylglycerin is a multifunctional glyceryl ether used in cosmetics primarily as a preservative-enhancing agent and emollient, often paired with phenoxyethanol to broaden antimicrobial efficacy. It also acts as a deodorizing agent and humectant in skincare formulations.

Key active = does the main work. Ingredient explanations are drawn from public databases & literature.

From published literature

Peer-reviewed papers on the active ingredients in this product, via PubMed.

◆ CureSkin

Not sure what your skin needs?

A free CureSkin dermatologist assessment factors in your skin type, routine, climate and history.

Get a free skin assessment →